• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.252-255
• /
• 2004

This paper presents a new technique to generate the 1-bit signal by decoding Pulse Width Modulation (PWM) signal to a binary file before programming onto the ROM. Since each PWM signal requires only 1-bit digital signal, PWM signal and other forms of digital signal related to multi-bit can be simply generated. The results demonstrate that using this new technique to generate the PWM signal can simplify the process and hardware complication. Moreover, the signal's data and frequency can be easily modified by programming the data onto the ROM and using the counter, respectively, which can reduce the size of the circuit and make the PCB easier.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1480-1489
• /
• 2017

In this study, a carrier-based pulse-width modulation (PWM) method for two-level voltage source inverters in the over-modulation region is proposed. Based on the superposition principle, the reference voltage vectors outside the linear modulation boundary are adjusted to relocate to the vector hexagon, while their fundamental magnitudes are retained. In accordance with the adjusted reference vector, the corresponding modulated waves are respectively deduced in over-modulation mode I and II to generate the gate signals of the power switches, guaranteeing the linearity of the fundamental output phase voltage in the over-modulation region. Moreover, due to the linear relationship between the voltage vector and the duty ratios, the complicated sector identification and holding angle calculation found in previous methods are avoided in the modulated wave synthesis, which provides great simplicity for the proposed carrier-based over-modulation strategy. Experimental results demonstrate the effectiveness and validity of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제18권4호
• /
• pp.371-374
• /
• 2012

DC/DC switching power converters produce DC output voltages from different stable DC input sources regulated by a bi-polar transistor. The converters can be used in regenerative braking of DC motors to return energy back in the supply, resulting in energy savings for the systems containing frequent stops. The voltage mode DC/DC converter is composed of a PWM (Pulse Width Modulation) controller, a MOSFET (Metal Oxide Semiconductor Field Effect Transistor), an inductor, and capacitors, etc. PWM is applied to control and regulate the total output voltage. It is shown that the output of DC/DC converter depends on the variation of threshold voltage at MOSFET and the variation of pulse width. In the PWM operation, the missing pulses, the changes in pulse width, and a change in the period of the output waveform are studied by SPICE (Simulation Program with Integrated Circuit Emphasis) and experiments.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.37-41
• /
• 2006

In this paper, a composition modulation of Dot-matrix display grayscale is presented. There's two method of expression of Dot-matrix Display grayscale. One is PWM by controlling pulse width. The other is PAM by controlling pulse amplitude. Composition modulation of Dot-matrix use PWM and PAM together. Composition modulation shows the number of grayscale as number of grayscale of PWM$\times$number of grayscale of PAM and have the effect of reduced size than existing single modulation.

• 전자공학회논문지SC
• /
• 제41권6호
• /
• pp.37-42
• /
• 2004

사람의 체질이 산성화로 변화되는 것을 막고 생체 밸런스를 유지하기위해 알칼리수를 인간의 인체에 공급할 필요가 있다. 알칼리수는 인체에 유익한 칼슘(Ca/sup +/), 칼륨(K/sup +/), 마그네슘(Mg/sup +/), 나트륨(Na/sup +/)등을 포함한 물로 되어있다. 이러한 알칼리수를 생성하기 위해서는 물을 전기분해하여 격막(격리된 특수막)을 통해 - 전극 쪽으로 미네랄들을 모아 생성한다. 물론 반대로 + 전극쪽으로는 염소(Cl), 인(P), 유황(S) 등의 - 이온을 띈 유기물들이 모여 산성수도 발생되어 다른 용도의 물로 사용할 수 있다. 이 전기분해 과정에서 - 극판과 + 극판에 PWM(pulse width modulation)전압을 Microprocessor를 이용하여 4종류의 PWM 전압을 구현하고, 전압별 ph농도 변화를 고찰해 보았다. 이와 같이 PWM제어를 이용하면 필요한 ph농도 값의 알칼리 이온수를 설정 값으로 하면 정확하게 얻을 것으로 예상된다.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.134-145
• /
• 2019

A single-phase step-up five-level inverter topology with a new phase-shifted pulse width modulation (PS-PWM) strategy is proposed in this paper. When compared with conventional single-phase five-level inverter topologies, the proposed topology can realize multilevel inversion with a double step-up ratio, a reduced number of switching devices and self-balanced capacitor voltages. When compared with the conventional PS-PWM strategy, the new PS-PWM strategy can be implemented with one carrier reduced, which makes it much easier to implement in a digital signal processor (DSP) system. Experimental results have been presented to verify the effectiveness of the proposed inverter and the PS-PWM strategy.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.269-274
• /
• 2013

전해 산성이온수는 알칼리성 이온수에 비해 응용분야가 음용을 목적으로 하는 알칼리이온수와 많이 다르게 이용되고 있으며 ph 농도에 따라 강산성인 경우 잔류염소에 의한 살균 목적의 소독제로 사용되고, 중산성인 경우 세척과 세안으로 사용하고, 약산성인 경우 식재료와 혼합하여 요리에 널리 사용할 수 있다. 이런 산성이온수를 생성하기 위해서는 물을 전기분해 하여 사용하는데 전기분해 하는 과정에서 염소가스와 수산화나트륨 등의 물질로 살균력을 가지며, 전기분해시 +전극 쪽으로 -이온을 띤 염소, 인, 유황 등의 유기물이 모여져 산성이온수를 만든다. 또한 산성수와 알칼리수를 분리하기 위해서 격막을 사용했다. ph 농도변화의 구현방법은 Microprocessor를 이용하여 강산성에서 약산성 사이의 ph 농도를 PWM(pulse width modulation) 제어로 3종류의 PWM 전압을 전해조 전극에 인가하여 PWM제어에 의한 연속적으로 농도가 조절된 산성수가 생성되게 구현하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2018-2030
• /
• 2015

A two stage ac drive configuration consisting of a single-phase line commutated rectifier and a three-phase voltage source inverter (VSI) is very common in low and medium power applications. The deterministic pulse width modulation (PWM) methods like sinusoidal PWM (SPWM) could not be considered as an ideal choice for modern drives since they result mechanical vibration and acoustic noise, and limit the application scope. This is due to the incapability of the deterministic PWM strategies in sprawling the harmonic power. The random PWM (RPWM) approaches could solve this issue by creating continuous harmonic profile instead of discrete clusters of dominant harmonics. Insufficient filtering at dc link results in the amplitude distortion of the input dc voltage to the VSI and has the most significant impact on the spectral errors (difference between theoretical and practical spectra). It is obvious that the sprawling effect of RPWM undoubtedly influenced by input fluctuation and the discrete harmonic clusters may reappear. The influence of dc link fluctuation on harmonics and their spreading effect in the VSI remains invalidated. A case study is done with four different filter capacitor values in this paper and results are compared with the constant dc input operation. This paper also proposes an ingenious RPWM, a ripple dosed sinusoidal reference-random carrier PWM (RDSRRCPWM), which has the innate capacity of suppressing the effect of input fluctuation in the output than the other modern PWM methods. MATLAB based simulation study reveals the fundamental component, total harmonic distortion (THD) and harmonic spread factor (HSF) for various modulation indices. The non-ideal dc link is managed well with the developed RDSRRCPWM applied to the VSI and tested in a proto type VSI using the field programmable gate array (FPGA).

• 전력전자학회논문지
• /
• 제3권4호
• /
• pp.287-297
• /
• 1998

RPWM(Random Pulse Width Modulation)은 인버터의 스위칭 주파수를 랜덤하게 변화 시킴으로써 전압, 전류의 고조파 및 소음의 스펙트럼을 광대역에 분산시키는 PWM 기법이다. 스위칭 주파수 또는 펄스의 위치를 랜덤하게 변화시켜 고조파의 불연속적인 이산치 성분을 넓은 영역에 분산시켜 EMI, 진동 등에 좋은 효과를 낼 수 있을 뿐만 아니라, 전력소자의 스위칭에 의해 발생하는 가청 스위칭 소음을 저감할 수 있으므로 근래에 매우 각광 받고 있다. 본 연구에서는 펄스의 위치를 랜덤하게 함으로써 가청 스위칭 소음을 저감할 수 있는 새로운 RPPWM(Random Position Pulse Width Modulation) 방식의 제안 및 구현하였다. 제안된 방식은 각 3상 펄스들의 위치를 변조 구간 내의 임의의 위치에 랜덤하게 배치함으로써 RPWM을 구현하는 방식이다. 이를 위하여 16bit 공성능 마이크로 컨트롤러의 C167을 사용하여, 공각 벡터 변조에 의하여 각 변조 구간에서의 듀티비를 구한 후, 랜덤수 발생기를 이용하여 균일한 분포로 각 상의 펄스를 배치하였다. 그리고 제안된 RPPWM을 이용하여 실험한 결고, 전압, 전류 및 소음의 스텍트럼이 광대역화 되어 전력소자의 스위칭에 의해 발생하는 전동기의 가청 스위칭 소음이 현저히 저감 됨을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.106-108
• /
• 2020

This paper introduces a new pulse-width modulation (PWM) method to reduce common-mode voltages (CMVs) and compare its performance with other reduced CMV-PWM (RCMV-PWM) methods. To avoid the use of zero-vectors which cause high CMV peaks, the introduced method splits every reference vector into two vectors such that the peak-to-peak magnitude of CMV is reduced by one-third of conventional space-vector PWM (SVPWM). The performance of RCMV-PWMs altered by the modulation index are analyzed with simulation results.