• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (1)
• /
• pp.486-488
• /
• 2000

본 연구는 정형기법을 사용하여 Safety-Critical System의 개발 방법론을 제시한다. Safety-Critical System의 전체적인 개발 과정을 제시하고 Safety-Critical System 중의 하나인 원자력 발전소 시스템 중 Reactor Protection System(RPS)을 정형 명세(Formal Specification)하고 정형 검증(Formal Verification)하는 과정과 그에 따른 각 과정의 Compliance를 확인하는 예를 든다. 여기서 정형 명세에는 Software Cost Reduction(SCR)이하는 도구가 사용되었고, 정형 검증에는 SPIN이, Compliance를 확인하는 데에는 Prototype Verification System(PVS)를 사용하였다.

• 한국작물학회지
• /
• 제59권4호
• /
• pp.498-504
• /
• 2014

Potato virus Y (PVY) and potato leafroll virus (PLRV) are among the most damaging potato viruses and prevalent in most potato growing areas. In this study, cryopreservation was used to eradicate PVY and PLRV using two cryogenic methods. Potato shoot tips proliferated in vitro were cryopreserved through droplet-vitrification and encapsulation-vitrification using plant vitrification solution 2 (PVS2; 30% glycerol + 15% dimethyl sulfoxide + 15.0% ethylene glycol + 13.7% sucrose) and modified PVS2. Both cryogenic procedures produced similar rates of survival and regrowth, which were lower than those from shoot tip culture alone. The health status of plantlets regenerated from shoot tip culture alone and cryopreservation was checked by reverse transcription-polymerase chain reaction. The frequency of virus-free plants regenerated directly from highly proliferating shoot tips reached 42.3% and 48.6% for PVY and PLRV, respectively. In comparison, the frequency of PVY and PLRV eradication after cryopreservation was 91.3~99.7% following shoot-tip culture. The highest cryopreserved shoot tip regeneration rate was observed when shoot tips were 1.0~1.5 mm in length, but virus eradication rates were very similar (96.4~99.7%), regardless of shoot tip size. This efficient cryotherapy protocol developed to eliminate viruses can also be used to prepare potato material for safe long-term preservation and the production of virus-free plants.

• Imaging Science in Dentistry
• /
• 제49권4호
• /
• pp.257-263
• /
• 2019

Purpose: This study was performed to evaluate the dimensional accuracy of digital dental models constructed from cone-beam computed tomographic (CBCT) scans of polyvinyl siloxane (PVS) impressions and cast scan models. Materials and Methods: A pair of PVS impressions was obtained from 20 subjects and scanned using CBCT (resolution, 0.1 mm). A cast scan model was constructed by scanning the gypsum model using a model scanner. After reconstruction of the digital models, the mesio-distal width of each tooth, inter-canine width, and inter-molar width were measured, and the Bolton ratios were calculated and compared. The 2 models were superimposed and the difference between the models was measured using 3-dimensional analysis. Results: The range of mean error between the cast scan model and the CBCT scan model was -0.15 mm to 0.13 mm in the mesio-distal width of the teeth and 0.03 mm to 0.42 mm in the width analysis. The differences in the Bolton ratios between the cast scan models and CBCT scan models were 0.87 (anterior ratio) and 0.72 (overall ratio), with no significant difference (P>0.05). The mean maxillary and mandibular difference when the cast scan model and the CBCT scan model were superimposed was 53 ㎛. Conclusion: There was no statistically significant difference in most of the measurements. The maximum tooth size difference was 0.15mm, and the average difference in model overlap was 53 ㎛. Digital models produced by scanning impressions at a high resolution using CBCT can be used in clinical practice.

• 대한전자공학회논문지SP
• /
• 제40권1호
• /
• pp.114-123
• /
• 2003

본 논문에서는 영상 객체 (object) 의 모양 정보를 효율적으로 부호화 하는 기법을 제안한다. 다각 근사화 기법은 손실 부호화 기법으로써 객체의 모양을 근사화 하는데 가장 널리 사용되고 있다. 제안된 기법은 최대 허용 오차를 만족하면서 정점을 선택할 때 기존의 순환 정점 선택 (IRM: iterated refinement method) 이나 순차적 정점 선택 (PVS: progressive vertex selection) 보다 적은 수의 정점을 선택함으로써 비트량을 줄인다. 기존의 순차적인 정점 선택 기법을 기반으로 하여 새로운 정점 선택 조건을 제안하여 비트량-왜곡면에서 우수한 성능을 가지는 부호화기를 구현하였다. 실험 결과에서 제안된 기법이 기존의 정점 선택 기법들에 비해 우수한 성능을 나타냄을 알 수 있다.

• 한국자원식물학회지
• /
• 제19권3호
• /
• pp.385-391
• /
• 2006

In vitro-grown axillary buds of Melia aredarach were successfully cryopreserved by vitrification. On the MS medium supplemented with BA 1 mg/L, multiple shoots were developed within $4{\sim}5$ weeks. Plantlets of Melia azedarach were cold-hardened at $10^{\circ}C$ for a 16-hr photo-period for 6 weeks. Excised axillary shoot-tips from hardened plantlets were precultured on a solidified Murashige & Skoog agar medium (MS) supplemented with 0.7 M sucrose for 1 day at $25^{\circ}C$. Axillary shoot-tip meristems wert dehydrated using a highly concentrated vitrification solution (PVS2) for 60 min at $0^{\circ}C$ prior to a direct plunge into liquid nitrogen (LN). The PVS2 vitrification solution consisted of 30% glycerol (w/v), 15% ethylene glycol (w/v), 15% DMSO (w/v) in MS medium containing 0.4M sucrose. After short-term warming in a water bath at $40^{\circ}C$, the meristems were transferred into 2 ml of MS medium containing 1.2M sucrose for 15 min and then planted on solidified MS culture medium. Successfully vitrified and warmed meristems resumed growth within 2 weeks and directly developed shoots without intermediary callus formation. The survival rate of cold-hardened plantlets for 3 and 4 weeks was 90%. We did not find any difference in PCR-band patterns between control and cryopreserved plants. This method appears to be a promising technique for cryopreserving axillary shoot-tips from in vitro-grown plantlets of Medicinal plants.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1459-1473
• /
• 2018

This paper focuses on voltage control schemes for multi-terminal low-voltage direct current (LVDC) distribution systems. In a multi-terminal LVDC distribution system, there can be multiple AC/DC converters that connect the LVDC distribution system to the AC grids. This configuration can provide enhanced reliability, grid-supporting functionality, and higher efficiency. The main applications of multi-terminal LVDC distribution systems include flexible power exchange between multiple power grids and integration of distributed energy resources (DERs) using DC voltages such as photovoltaics (PVs) and battery energy storage systems (BESSs). In multi-terminal LVDC distribution systems, voltage regulation is one of the most important issues for maintaining the electric power balance between demand and supply and providing high power quality to end customers. This paper focuses on a voltage control method for multi-terminal LVDC distribution system that can efficiently coordinate multiple control units, such as AC/DC converters, PVs and BESSs. In this paper, a control hierarchy is defined for undervoltage (UV) and overvoltage (OV) problems in LVDC distribution systems based on the control priority between the control units. This paper also proposes methods to determine accurate control commands for AC/DC converters and DERs. By using the proposed method, we can effectively maintain the line voltages in multi-terminal LVDC distribution systems in the normal range. The performance of the proposed voltage control method is evaluated by case studies.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권1호
• /
• pp.46-61
• /
• 2002

소프트웨어의 개발 단계 중 품질을 결정하는 주요 단계는 요구 명세 단계로 알려져 있다. 따라서, 소프트웨어 개발 업체는 소프트웨어 요구명세서의 분석을 가장 중요한 단계 중 하나로 취급하고 있고, 특히 안전성이 중요한 시스템의 경우에는 시스템을 운영하기 위하여 국내와 국제적인 규제 기관에서는 요구 명세의 분석을 통한 안전성의 입증을 요구한다. 소프트웨어의 요구 명세 분석을 위한 방법 중 인스펙션과 정형 검증이 가장 효과적인 방법으로 알려져 있다. 본 논문에서는 SCR-style의 요구 명세를 정리 증명기인 PVS를 이용하여 정형 검증을 수행하는 방법을 제안하였다. 그리고, 논문에서 제안된 방법으로 실제 월성 원자력 발전소의 정지 시스템의 검증을 수행하였다. 이 시스템은 인스펙션으로 검증된 적은 있으나 정형 검증 방법으로는 증명된 적이 없고, 국내에서 실제 운영되는 산업계시스템에 정형 검증 방법이 적용된 사례는 매우 드물기 때문에 차후 정형 검증 방법을 적용하기 위한 평가로서도 이와 같은 실험적인 적용이 매우 중요하다.

• 한국자원식물학회지
• /
• 제14권3호
• /
• pp.241-246
• /
• 2001

옻나무 근삽에 의한 묘목의 생산성을 향상시키기 위하여 7종류의 삽상배지를 공시하여 신초발생율과 묘소질을 조사하였다 삽상배지는 PV(peatmoss vermiculite = 1 : 1)와 PVS(peat moss : vermiculite : sand = 1 : 1 : 2) 처리구에서 3주 후부터 신초가 발생되었고, 삽 식 10주 후의 신초발생율은 PVSC(peatmoss : vermiculite : sand : clay loam = 1 : 1 : 2 : 2)배지에서 80%로써 가장 높았다. 삽수당 신초형성수는 PH와 PVC 삽상배지가 2.2개로써 가장 많았고 HSC 삽상배지 는 1.3∼1.5개로써 가장 적었으나 통계적인 유의차는 인정되지 않았다. Peatmoss, vermiculite, sand 및 clay loam을 각각 1:1:2:2 (v/v/v/v)로 혼합한 PVSC 삽상배지가 옻나무 근삽의 삽상배지로 이용하기에 양호하였으며, 수장, 분지수, 엽수, 경직경 및 엽면적 등의 묘소질 역시 양호하여 본포에 이식하기에 적당하였다.

• Journal of Veterinary Science
• /
• 제23권2호
• /
• pp.31.1-31.13
• /
• 2022

Background: Compared to medium containing 108 mM sodium chloride (NaCl), in vitro maturation (IVM) using a simple medium with reduced (61.6 mM) NaCl increases the cytoplasmic maturation and embryonic development of pig oocytes. Objectives: This study determines the effect of a complex medium containing reduced NaCl on the IVM and embryonic development of pig oocytes. Methods: Pig oocytes were matured in Minimum Essential Medium Eagle-alpha modification (αMEM) supplemented with 61.6 (61αMEM) or 108 (108αMEM) mM NaCl, and containing polyvinyl alcohol (PVA) (αMEMP) or pig follicular fluid (PFF) (αMEMF). Medium-199 (M199) served as the control for conventional IVM. Cumulus cell expansion, nuclear maturation, intra-oocyte glutathione (GSH) contents, size of perivitelline space (PVS), and embryonic development after parthenogenesis (PA) and somatic cell nuclear transfer (SCNT) were evaluated after IVM. Results: Regardless of PVA or PFF supplementation, oocytes matured in 61αMEM showed increased intra-oocyte GSH contents and width of PVS (p < 0.05), as well as increased blastocyst formation (p < 0.05) after PA and SCNT, as compared to oocytes matured in 108αMEMP and M199. Under conditions of PFF-enriched αMEM, SCNT oocytes matured in 61αMEMF showed higher blastocyst formation (p < 0.05), compared to maturation in 108αMEMF and M199, whereas PA cultured oocytes showed no significant difference. Conclusions: IVM in αMEM supplemented with reduced NaCl (61.6 mM) enhances the embryonic developmental competence subsequent to PA and SCNT, which attributes toward improved oocyte maturation.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.121-127
• /
• 2004

This paper presents a new vertex selection scheme for shape approximation. In the proposed method, final vertex points are determined by "two-step procedure". In the first step, initial vertices are simply selected on the contour, which constitute a subset of the original contour, using conventional methods such as an iterated refinement method (IRM) or a progressive vertex selection (PVS) method In the second step, a vertex adjustment Process is incorporated to generate final vertices which are no more confined to the contour and optimal in the view of the given distortion measure. For the optimality of the final vertices, the dynamic programming (DP)-based solution for the adjustment of vertices is proposed. There are two main contributions of this work First, we show that DP can be successfully applied to vertex adjustment. Second, by using DP, the global optimality in the vertex selection can be achieved without iterative processes. Experimental results are presented to show the superiority of our method over the traditional methods.