• Bulletin of the Korean Chemical Society
• /
• 제6권3호
• /
• pp.145-148
• /
• 1985

The effect of anionic polyelectrolytes, poly(styrenesulfonate) (PSS) and poly(vinylsulfonate) (PVS), on the charge transfer complexing between indole derivatives and methyl viologen($MV^{++}$) cation was investigated. The results were compared with effect of NaCl and an anionic surfactant, sodium dodecylsulfate (SDS). Both PSS and PVS enhanced the complex formation of neutral species (indole and indole acetate at low pH), zwitter ionic tryptophan, and positively charged tryptamine and tryptophan at low pH with $MV^{++}$. This result was attributed to the contribution of hydrophobic interaction, in addition to electrostatic interaction. The enhancing effect of PSS was much higher than that of PVS reflecting the higher hydrophobicity of PSS. The interaction between indole acetate anion and $MV^{++}$ was greatly reduced by addition of PVS and PSS. The higher charge density of PVS was appeared as greater reducing effect indicating the importance of electrostatic force in this case. In all cases, the effect of polyelectrolytes showed maxima, and further addition of PVS and PSS decreased the effect. This behavior was explained in terms of distribution of indole derivatives and $MV^{++}$ in domain of polyanions. The complex formation constants and molar absorptivities of complexes were determined, and the values were compared with those in water and SDS solutions.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.138-146
• /
• 2019

PURPOSE. Comparing the accuracy of casts produced from digital workflow to that of casts produced from conventional techniques. MATERIALS AND METHODS. Whole arch alginate (ALG) and polyvinyl siloxane (PVS) impressions were taken with stock trays and custom trays, respectively. The ALG impressions were poured with type III dental stone, while the PVS impressions were poured with type IV dental stone. For the digital workflow, IOS impressions were taken and physical casts were produced by 3D printing. In addition, 3D printed casts were produced from images obtained from a laboratory scanner (LS). For each technique, a total of 10 casts were produced. The accuracies of the whole arch and separated teeth were virtually quantified. RESULTS. Whole arch cast accuracy was more superior for PVS followed by LS, ALG, and IOS. The PVS and ALG groups were inferior in the areas more susceptible to impression material distortion, such as fossae and undercut regions. The LS casts appeared to have generalized errors of minor magnitude influencing primarily the posterior teeth. The IOS casts were considerably more affected at the posterior region. On the contrary, the IOS and LS casts were more superior for single tooth accuracy followed by PVS and ALG. CONCLUSION. For whole arch accuracy, casts produced from IOS were inferior to those produced from PVS and ALG. The inferior outcome of IOS appears to be related to the span of scanning. For single tooth accuracy, IOS showed superior accuracy compared to conventional impressions.

• 화약ㆍ발파
• /
• 제26권2호
• /
• pp.1-10
• /
• 2008

우리나라에서는 제어발파와 관련된 대부분의 시방서 등에서 허용기준을 '입자속도'로만 규정하고 PPV나 PVS의 세부적인 잣대로는 구분하지 않고 있다. 그 결과, 이 '입자속도'는 PPV나 PVS 등의 어느 쪽으로든 해석이 가능하게 됨으로써 이들을 모두 고려하는 우리나라 특유의 관습적인 방법이 생겨나게 되었다. 원래 PPV나 PVS 등은 지반진동과 구조물 손상과의 인과관계에 대한 연구결과로부터 제안된 것으로, 일반적으로는 이들 가운데 어느 하나를 허용수준(허용치)의 잣대로 선택하여 사용하므로 우리나라의 관습적인 방법과 대비된다. 이런 맥락에서 본 논문에서는 제어발파의 설계 및 관리에 관한 기본개념을 허용기준을 중심으로 고찰함으로써 PPV나 PVS 가운데 어느 하나를 잣대로 사용하는 '일반적인 방법'과 양자를 모두 사용하는 '관습적인 방법'을 서로 비교해 보았다. 그 결과, 관습적인 방법은 허용수준을 설정하기에 따라 일반적인 방법과 다를 바가 없음에도 방법의 적용이 복잡하고, 잣대가 수시로 바뀌어 혼란의 소지가 높은 것으로 나타났다. 사실 관습적인 방법은 여러 가지 영향요소를 고려해야 하는 연구단계에서는 필요한 방법이지만 현장적용 단계에 들어가서는 '일반적인 방법'에 비해 단점은 있어도 장점은 발견하기 어렵다. 따라서 앞으로는 간편하고 합리적인 제어발파 방법으로서 '일반적인 방법'을 사용하는 것이 바람직할 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.157-171
• /
• 1999

In this work, an automatic software verification method for Nuclear Power Plant (NPP) protection system is developed. This method utilizes Colored Petri Net (CPN) for system modeling and Prototype Verification System (PVS) for mathematical verification. In order to help flow-through from modeling by CPN to mathematical proof by PVS, an information extractor from CPN models has been developed in this work. In order to convert the extracted information to the PVS specification language, a translator also has been developed. ML that is a higher-order functional language programs the information extractor and translator. This combined method has been applied to a protection system function of Wolsong NPP SDS2(Steam Generator Low Level Trip). As a result of this application, we could prove completeness and consistency of the requirement logically. Through this work, in short, an axiom or lemma based-analysis method for CPN models is newly suggested in order to complement CPN analysis methods and a guideline for the use of formal methods is proposed in order to apply them to NPP Software Verification and Validation.

• 설비공학논문집
• /
• 제23권11호
• /
• pp.711-717
• /
• 2011

In this study, 5 types of PVS(Passive ventilation system) units are made and experimented its ventilation performance, thermal performance according to open rate and hole diameter of perforated aluminum plane. Results are as follows. 1) The ventilation performance increases approximately 50~70% according by the open rate of PVS increasing. Also, the ventilation performance increases about 2%~12% according by the hole diameter of PVS increasing. 2) In winter temperature/pressure condition(in : $20^{\circ}C$, out : $-2^{\circ}C/{\Delta}P$ : 0.2~5.0Pa) the temperature of inflow air decreases according by the open rate of PVS increasing. Heat gain performance decreases 10.1%, 25.6% when open rate increases 3) In the same condition, Heat gain performance decreases 18.3%, 18.8% according by the hole diameter of PVS increasing.

• Anatomy and Cell Biology
• /
• 제56권4호
• /
• pp.428-434
• /
• 2023

Pulmonary veins (PVs) and their myocardial sleeves play an important role in the development of atrial fibrillation. Hence, detailed knowledge of PV anatomy is required to improve the procedural success rate and prevent complications during cardiac procedures. The aim of this study was to evaluate the PV anatomy along with anatomical variations in the Indian population. Total 100 formalin fixed cadaveric hearts were examined. The number and pattern of the PVs were observed along with the measurement of their horizontal and vertical diameters. The ovality index for each PV was calculated. Classical PV pattern was observed in 62% cases. Variant pattern like additional right middle PV pattern and left common PV pattern were found in 20% and 10% cases respectively. A separate pattern with presence of both right middle PV and left common PV was observed in 6% cases. In the classical pattern right superior PV was the largest followed by right inferior, left superior and left inferior PV. The additional right middle PV had the smallest diameter whereas the left common PV had the largest diameter. Almost all the veins had greater vertical diameters in comparison to horizontal diameters. The variant PVs were oval and had greater ovality index compared to the normal PVs. In classical pattern 54.8% hearts whereas in variant pattern 79% hearts had one or more oval PV. The given data can help clinicians for planning and execution of various interventional and electrophysiological procedures involving PVs.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.122-125
• /
• 2007

In recent years, there has been an increasing demand for improved accuracy and reliability of Earth Observation Satellite (EOS) data. Most of the data users in the field of remote sensing require understanding of product accuracy and uncertainty. Especially, EOS application products should be validated for practical application in the field. In order to evaluate the availability and applicability of application products, it will be necessary to establish a systematic validation system including techniques, equipments, ground truth data, etc. The Product Validation Site (PVS) for generation and validation of KOMPSAT application products was designed and established with various in-situ equipment and dataset. This paper presents the status of PVS and summarizes some results from experiment studies at PVS.

• Advances in Energy Research
• /
• 제8권1호
• /
• pp.1-19
• /
• 2022

The application of Photovoltaic (PV) power in the building sector, is expanding as part of the ongoing energy transition into renewables. The article addresses the question of sustainability of energy generated from PVs through an environmental assessment of a building-integrated PV system (BIPV) connected to the grid through net metering. Employing retrospective life cycle analysis (LCA), with the CCaLC2 software and ecoinvent data, the article shows that the carrying structure and other balance of system (BOS) components are responsible for a three times higher energy payback time than the literature average. However, total environmental impact can be lowered through reuse or reinstallation of PVs on the same building structure after the 30-year interval. Further ways to improve environmental efficiency include identifying the most polluting materials for each LCA parameter. The results of this study are of interest to researchers and producers of PVs and organizations investing and promoting decentralized power production through PVs.

• Journal of Plant Biotechnology
• /
• 제44권4호
• /
• pp.478-483
• /
• 2017

기내배양한 감자에 1일, 2일, 3일간 저온처리 후 저온관련 유전자의 발현양상을 조사하였다. 저온 처리 기간이 늘어날수록 PPI1, CI21B유전자의 발현양은 증가하였고, CBF4, CI21A 유전자의 발현양은 감소하였다. 또한 CI21A와 CI21B유전자의 잎, 줄기, 괴경에서 명 처리와 암 처리 기간별로 저온 처리기간에 따른 유전자의 발현의 차이를 보았다. 이에 근거하여 감자 정아의 동결과정 중에서 LS단계와 PVS2 단계에서 AFP를 농도별로 처리하였다. 그 결과, 저온처리 기간이 늘었을 때의 유전자 발현양상과 AFP 특정 농도에서의 발현 양상이 동일하였다. LS단계에서는 1,500 ng/ml AFP 처리와, PVS2단계에서 500 ng/ml AFP 처리가 감자 정아의 초저온동결보존에 효과적이라는 것을 유전자의 발현 양상으로 확인하였다.

• 생물정신의학
• /
• 제6권1호
• /
• pp.111-118
• /
• 1999

본 연구에서 저자들은 성인 정신분열병환자에서 손톱주름 총 시도와 정신분열병의 발생연령, 정신 병리, 진행성, 병전 기능, 인지기능과의 관련성을 알아보고자 DSM-IV의 진단기준에 맞는 정신분열병 환자 40명과 대조군 40명을 선택하여 연구한 결과 다음과 같은 결과를 보여주었다. 첫째, 정신분열병 대상군($6.2{\pm}5.9$)과 정상 대조군($5.2{\pm}6.0$) 간의 총 시도 점수(PVS)에서 통계적으로 유의한 차이가 없었고 (t=-0.67, p=0.252), 고도의 PVS 비율에서도 두 군간의 통계적인 차이가 없었다(${\chi}^2$=2.90, p=0.088). 둘째, PVS 많을수록 음성 증상을 제외한 PANSS의 모든 증상군에서 통계적으로 유의한 상관 관계를 보여주었다. 셋째, 발병연령이 빠를수록 PVS가 높았다(r=-0.291, p=0.034). 넷째, 병전적응이 안 좋을수록 PVS가 높았다(r=0.265, p=0.049). 다섯째, 정신분열병의 경과가 진행성일수록 신체미세기형이 많았다(r=-0.272, p=0.045). 여섯째, PVS와 CPT 정답률과는 역 상관관계(r=-0.375, p=0.009)를, CPT 개입 오류와는 상관관계(r=0.293, p=0.041)를 보여주었다. 본 연구의 소견에서, 손톱주름 총 시도가 정신분열병의 음성 증상과 관계된 일부 소견들에서만 연관이 있다는 것을 시사하고 있지만 이 연구는 적어도 어떤 형태의 정신분열병 환자들에 있어서 손톱주름 총 시도는 안 좋은 병전 적응력, 진행성 정신분열병과 같은 부분적으로 음성증상과 관련이 있는 임상 변인들 사이에 연관성을 보여 주었고, 이러한 소견은 정신분열병의 어떤 아형의 원인에 있어서 기질적인 영향이 있을 수 있다는 것을 암시한다.