• 멤브레인
• /
• 제25권5호
• /
• pp.391-397
• /
• 2015

다공성 지지체인 Polyvinylidene fluoride (PVDF) 중공사막에 염석법을 기반으로 하여 Polyethyleneimine (PEI)와 Polyvinylsulfonic acid (PVSA)를 가압법(phase separated and pressurization, PSP)으로 코팅시켜 다층막을 제조하였다. 이에 열처리 온도, 코팅농도, 유입수 농도, 가교시간 및 가교제 농도에 대하여 NaCl 100 ppm을 공급액으로 하여 4 atm에서 투과도와 제거율을 알아보고자 하였다. 가장 좋은 결과로는 PEI 20,000 ppm과 PVSA 1,000 ppm, PEI 15%에 말산 2% 수용액으로 가압코팅 후 열처리하였을 때 투과도 24.3 LMH, 제거율 82.1%의 결과를 얻을 수 있었다.

• Membrane and Water Treatment
• /
• 제13권6호
• /
• pp.291-301
• /
• 2022

In this study, cement/PVDF hollow-fiber hybrid membranes were prepared via a mixed process of diffusion-induced phase separation and hydration. The presence of X-ray diffraction peaks of Ca(OH)₂, an AFt phase, an AFm phase, and C-S-H phase confirmed the hydration reaction. Good hydrophilicity was obtained. The cross-sectional and surface morphologies of the hybrid membranes showed that an asymmetric pore structure was formed. Hydration products comprising parallel plates of Ca(OH)₂, fibrous ettringite AFt, and granulated particles AFm were obtained gradually. For the hybrid membranes cured for different time, the pore-size distribution was similar but the porosity decreased because of blocking of the hydration products. In addition, the water flux decreased with hydration time, and carbon retention was 90% after 5 h of rejection treatment. Almost all the Zn²⁺ ions were adsorbed by the hybrid membrane. The above results proved that the obtained membrane could be alternative as basement membrane for separation application.

• 멤브레인
• /
• 제23권5호
• /
• pp.360-366
• /
• 2013

Poly (vinylidene fluoride) (PVDF) poly (acrylonitrile) (PAN) 중공사막에 친수성 고분자인 poly (vinyl alcohol) (PVA)과 가교제인 poly (acrylic acid) (PAA)을 코팅하여 복합막을 제조하였다. 제조된 막의 투과특성평가를 위해 90 wt% 물-에탄올 혼합액에 대한 투과증발실험을 수행하였으며, 반응온도, PAA용액의 농도, 공급액의 온도변화에 따른 투과도 및 선택도를 측정하였다. 일반적으로 반응온도, PAA용액의 농도가 증가할수록 투과도는 낮아지고 선택도는 증가하는 경향을 보였으며, 공급액의 온도가 증가할수록 투과도는 증가하고 선택도는 낮아지는 경향을 보였다. 대표적으로 PVDF중공사 막은 투과도는 PAA 3 wt%, 반응온도 $60^{\circ}C$, 공급액 온도 $70^{\circ}C$에서 $502g/m^2hr$, 선택도는 PAA 11 wt%, 반응온도 $100^{\circ}C$, 공급액 온도 $50^{\circ}C$일 때, 218의 결과를 얻을 수 있었다.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.161-169
• /
• 2005

PVDF(polyvinylidenefluoride)중공사막 접촉기를 이용한 이산화탄소의 흡수에 관한 수치모사 및 실험을 수행하였다. 흡수제로는 물 또는 모노에탄올아민(monoethanolamine, MEA) 수용액을 사용하였다. 수치모사결과, 막접촉기에서의 이산화탄소의 농도분포는 MEA 수용액을 흡수제로 사용하였을 경우가 물을 흡수제로 사용하였을 경우보다 흡수제 공급속도의 영향을 덜 받았으며, 이산화탄소의 흡수속도 및 물질전달계수는 MEA의 농도가 증가할수록 증가하였다. 실험을 통하여 얻은 이산화탄소의 물질전달계수를 수치모사결과 및 이론치와 비교한 결과, 물을 흡수제로 사용하였을 경우 물질전달계수는 실험값과 수치모사결과, 이론값이 모두 잘 일치하였다. 반면에 MEA 수용액을 흡수제로 사용하였을 경우에는 수치모사결과와 이론값은 잘 일치하였으나, 실험값은 플라즈마로 처리한 경우와 처리하지 않은 경우 모두 수치모사 결과보다 낮은 값을 나타내었다. 그러나 막접촉기에 사용된 중공사막의 내구성은 플라즈마로 처리시킨 막이 플라즈마처리를 수행하지 않은 막보다 우수하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2008년도 춘계 총회 및 학술발표회
• /
• pp.279-282
• /
• 2008

• 한국막학회:학술대회논문집
• /
• 한국막학회 2008년도 춘계 총회 및 학술발표회
• /
• pp.283-284
• /
• 2008

• Membrane and Water Treatment
• /
• 제14권2호
• /
• pp.85-93
• /
• 2023

Membrane separation is widely used for several applications such as water treatment, membrane reactors and climate change. Cross-linked organic-inorganic hybrid polyvinylidene fluoride (PVDF) / Tetraethyl orthosilicate (TEOS) was adopted for the preparation of optimized hollow membrane (HFM) for membrane distillation or other low pressure separators for mechanical properties and permeability under varying pretreatment schemes. HFMs were prepared on semi-pilot membrane fabrication system. Novel adopted post-treatment schemes involved soaking in glycerol, magnesium sulphate (MgSO₄), sodium hypochlorite (NaOCl), and isopropanol for different durations. All fibers were characterized for morphology using a scanning electron microscope (SEM), surface roughness using atomic force microscope (AFM), elemental composition by examining Energy Dispersive Spectroscopy (EDS), water contact angle (CA°) and porosity. The performance of the fibers was evaluated for pure water permeation flux (PWF). Post-treatment with MgSO₄ gave the highest both tensile modulus and flux. Assessment of properties and performance revealed comparable results with other organic-inorganic separators, HF or flat. In spite of few reported data on post treatment using MgSO₄ in presence of TEOS, this proves the potential of low cost treatment without negative impact on other membrane properties. The flux is also comparable with hypochlorite which manifests substantial precaution requirements in actual industrial use.The relatively high values of flux/bar for sample treated with TEOS, post treated with MgSO₄ and hypochlorite are 88 and 82 LMH/bar respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1332-1335
• /
• 2003

This paper presents the enhancement of oxygen transfer efficiency using the vibrating intravascular lung assist device (VIVLAD) in in-vitro experiments for patients having chronic respiratory problems. The test section was a cylinder duct with the inner diameter of 30 mm. The flow rate was controlled by the pump and monitored by a built-in flow meter. The vibration apparatus was composed of a piezo-vibrator, a function generator. and a power amplifier. The direction of vibration was radial to the fluid flow. Gas flow rates of up to 6 l/min through the 120-cm-Jong hollow fibers have been achieved by exciting a piezo-vibrator. The output of PVDF sensor were investigated by various frequencies in VIVLAD. The experimental results showed that VIVLAD would be enhance oxygen transfer efficiency.

• Membrane and Water Treatment
• /
• 제2권1호
• /
• pp.1-24
• /
• 2011

The deficiency of clean water is a major global concern because all the living creatures rely on the drinkable water for survival. On top of this, abundant of clean water supply is also necessary for household, metropolitan inhabitants, industry, and agriculture. Among many purification processes, advances in low-energy membrane separation technology appear to be the most effective solution for water crisis because membranes have been widely recognized as one of the most direct and feasible approaches for clean water production. The aim of this article is to give an overview of (1) two new emerging membrane technologies for water reuse and desalination by forward osmosis (FO) and membrane distillation (MD), and (2) the molecular engineering and development of highly permeable hollow fiber membranes, with polyvinylidene fluoride (PVDF) and polybenzimidazole (PBI) as the main focuses for the aforementioned applications in National University of Singapore (NUS). This article presents the main results of membrane module design, separation performance, membrane characteristics, chemical modification and spinning conditions to produce novel hollow fiber membranes for FO and MD applications. As two potential solutions, MD and FO may be synergistically combined to form a hybrid system as a sustainable alternative technology for fresh water production.

• 멤브레인
• /
• 제28권3호
• /
• pp.180-186
• /
• 2018

Polyvinylidene fluoride (PVDF)의 중공사막 표면에 2번 딥코팅하여 layer-by-layer 방식으로 나노복합막을 제조하였다. 1차 코팅에서 poly(vinylsulfonic acid)(PVSA)와 Poly(styrene sulfonic acid)(PSSA)의 농도, 이온세기(Ionic strength, IS) 등을 변화시키며 막을 제조하였으며, 2차 코팅 용액으로는 Poly(ethyleneimine) 10,000 ppm I.S = 0.3으로 고정하였다. 막의 특성평가를 위해 각각의 100 ppm NaCl, $CaSO_4$, $MgCl_2$, 그리고 25 ppm Methyl Orange (MO) 공급액에 대한 막의 투과도와 염배제율을 측정하였다. 코팅용액의 코팅 물질의 농도가 올라갈수록 염배제율이 상승하였으며, 본 실험 조건에서 PVSA보다는 PSSA를 이용하여 제조한 중공사막이 염배제율이 높은 것을 확인하였다. 대표적으로 PSSA 30,000 ppm I.S = 1.0에서 중 공사막을 제조하였을 때 25 ppm MO용액의 투과도 1.848 LMH, 염배제율 76.3%로 가장 높은 값을 나타내었다.