• The Korean Journal of Ceramics
• /
• 제3권2호
• /
• pp.116-123
• /
• 1997

A chemically stabilized $\beta$-cristobalite, which is stabilized by stuffing cations of $Ca^{2+}$ and $Al^{3+}$, was prepared by a solution-polymerization route employing Pechini resin or PVA solution as a polymeric carrier. The polymeric carrier affected the crystallization temperature, morphology of calicined powder, and particle size distribution. In case of the polyvinyl alcohol (PVA) solution process, a fine $\beta$-cristobalite powder with a narrow particle size distribution (average particle size : 0.3$\mu\textrm{m}$) and a BET specific surface area of 72 $\m^2$/g was prepared by an attrition-milling for 1 h after calcination at 110$0^{\circ}C$ for 1h. Wider particle size distribution and higher specific surface area were observed for the $\beta$-cristobalite powder derived from Pechini resin. The cubie(P1-to-tetraganalb) phase transformation in polynystalline $\beta$-cristobalite was induced at approximately 18$0^{\circ}C$. Like other materials showing transformation toughening, a critical size effect controlled the $\beta$-to-$\alpha$ transformation. Densifed cristobalite sample had some cracks in its internal texture after annealing. The cracks, occurred spontaneoulsy on cooling, were observed in the sample with an average grain sizes of 4.0 $\mu\textrm{m}$ or above. In case of the sintered cristobalite having a composition of CaO.$2Al_2O_3$.40SiO$_2$, small amount of amorphous phase and slow grain growth during annealing were observed. Shear stress-induced transformation was also observed in ground specimen. Cristobalite having a composition of CaO.2Al2O3.80SiO2 showed a more sensitive response to shear stress than the CaO.$2Al_2O_3$.40SiO$_2$ type cristobalite. Shear-induced transformation resulted in an increase of volume about 13% in $\alpha$-cristobalite phase on annealing for above 10 h in the case of the former composition.

• Computers and Concrete
• /
• 제20권4호
• /
• pp.491-502
• /
• 2017

In this research, the application of ultrasonic pulse velocity (UPV) test as a nondestructive method for estimating some of the mechanical and dynamic properties of reactive powder concrete (RPC) containing steel and polyvinyl alcohol (PVA) fibers, as well as their combination was explored. In doing so, ten different mix designs were prepared in 19 experimental groups of specimens containing three different volume contents of steel fibers (i.e., 1, 2, and 3 %) and PVA fibers (i.e., 0.25, 0.5, and 0.75 %), as well as hybrid fibers (i.e., 0.25-0.75, 0.5-0.5, and 0.75-0.25 %). The specimens in these groups were prepared under the two curing regimes of normal and heat treatment. Moreover, the UPV test results were employed to estimate the compressive strength, dynamic modulus, shear modulus, and Poisson's ratio of the RPC concrete and to investigate the quality level of the used concrete. At the end, the effect of the specimen shape and in fact the measuring distance length on the UPV results was explored. The results of this research suggest that the steel fiber-containing RPC specimens demonstrate the highest level of ultrasonic pulse velocity as well as the highest values of the mechanical and dynamic properties. Moreover, heat treatment has a positive effect on the density, UPV, dynamic modulus, Poisson's ratio, and compressive strength of the RPC specimens, whereas it leads to a negligible increase or decrease in the shear modulus and static modulus of elasticity. Furthermore, the specimen shape affects the UPV of fiber-lacking specimens while negligibly affecting that of fiber-reinforced specimens.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.530-536
• /
• 2023

The theoretical capacity of silicon-based anode materials is more than 10 times higher than the capacity of graphite, so silicon can be used as an alternative to graphite anode materials. However, silicon has a much higher contraction and expansion rate due to lithiation of the anode material during the charge and discharge processes, compared to graphite anode materials, resulting in the pulverization of silicon particles during repeated charge and discharge. To compensate for the above issues, there is a growing interest in SiO_x materials with a silica or carbon coating to minimize the expansion of the silicon. In this study, spherical silica (SiO₂) was synthesized using TEOS as a starting material for the fabrication of such SiO_x through heating in a reduction atmosphere. SiO_x powder was produced by adding PVA as a carbon source and inducing the reduction of silica by the carbothermal reduction method. The ratio of TEOS to distilled water, the stirring time, and the amount of PVA added were adjusted to induce size and morphology, resulting in uniform nanosized spherical silica particles. For the reduction of the spherical monodisperse silica particles, a nitrogen gas atmosphere mixed with 5 % hydrogen was applied, and oxygen atoms in the silica were selectively removed by the carbothermal reduction method. The produced SiO_x powder was characterized by FE-SEM to examine the morphology and size changes of the particles, and XPS and FT-IR were used to examine the x value (O/Si ratio) of the synthesized SiO_x.

• 멤브레인
• /
• 제17권3호
• /
• pp.174-183
• /
• 2007

본 연구는 압연공정을 이용하여 금속망 만을 사용하여 금속막을 제조하는 과정과 금속망과 금속분말을 사용하여 금속막을 제조하는 과정에 대해 연구했다. 금속망 압연과정에서 선택된 금속망은 각각 10%, 20% 그리고 30%의 감소율로 압연했다. 이 압연공정은 망 wire의 지름을 변화시키거나 망의 단면적의 감소를 통해 망의 공경 크기를 감소시킨다. 압연된 금속망의 여과율은 압연시키지 않은 금속망의 여과율과 거의 동일한 여과율을 보였으며 금속막의 공경크기 분포 또한 더 균일했다. 금속망 위에 금속분말 층을 제조하는데 있어 분말 접합제로서 PVA를 사용하였으며 1시간 동안 $100^{\circ}C$에서 금속분말 층을 건조시키고 진공에서 3시간 동안 $1000^{\circ}C$에서 소결시키는 방법이 높은 공경 밀도와 균열이 없는 금속망 위에 금속분말 층을 형성하는 최적 조건이었다. 소결 전 30%감소율을 가지는 금속망에 대해 금속분말 층 형성에 압연공정을 적용할 경우 여과율이 약 $0.7{\mu}m$인 금속막이 성공적으로 제조되었다.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.893-899
• /
• 1992

Composite specimens, which are composed MDF cement of HAC-PVA system were prepared by adding carbon fiber, hydrated silica and SiC powder, and we studied effect of additives on the flexural strength of the composites. All of additives is effective in the improvement of flexural strength of the composite specimens. The size of average pore diameter in the specimens which have high flexural strength property was small. Specimen mixed with hydrated silica was effective in the particle compact property. Flexural strength of carbon fiber reinforced MDF cement composites were improved because of crack deflection of carbon fiber in cementitious matrix.

• 한국재료학회지
• /
• 제18권8호
• /
• pp.411-416
• /
• 2008

In this research, fine-structure TiO2 bulks were fabricated in a combined application of magnetic pulsed compaction (MPC) and subsequent sintering and their densification behavior was investigated. The obtained density of $TiO_2$ bulk prepared via the combined processes increased as the MPC pressure increased from 0.3 to 0.7 GPa. Relatively higher density (88%) in the MPCed specimen at 0.7 GPa was attributed to the decrease of the inter-particle distance of the pre-compacted component. High pressure and rapid compaction using magnetic pulsed compaction reduced the shrinkage rate (about 10% in this case) of the sintered bulks compared to general processing (about 20%). The mixing conditions of PVA, water, and $TiO_2$ nano powder for the compaction of $TiO_2$ nano powder did not affect the density and shrinkage of the sintered bulks due to the high pressure of the MPC.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1513-1520
• /
• 1994

Mechanical properties of hot-pressed SiC whisker/Al2O3 composites were strongly dependent on the granular characteristics of mixed powder, which were controlled by co-dispersion condition, the existence of steric barrier on whisker surface, and granulating method, etc. Heat-treatment of SiC whiskers at $700^{\circ}C$ for 1 hr in air was very effective both for achieving dispersion stability of whiskers with PVA adsorption and for obtaining excellent mechanical properties of resulting composites. It is believed from the fractography of composites prepared with various whisker dispersion conditions that the most common fracture origin of Al2O3 agglomerate could be attributed to whisker clusters arising due to flocculation. Further improvement of mechanical properties of composites were achieved by hot pressing green tapes prepared by Doctor-blade process, which promoted two-dimensional random alignment of whiskers.

• 대한환경공학회지
• /
• 제35권9호
• /
• pp.636-642
• /
• 2013

광촉매인 나노크기의 산화아연(ZnO)과 흡착기능의 지지체인 Laponite, 결합제인 poly vinyl alcohol (PVA)를 혼합하여 붕산(boric acid)과 가교반응(crosslinking)을 통해 흡착과 광분해가 동시에 발생하며 회수가 불필요한 nano-ZnO/Laponite/PVA (ZLP) 광촉매 흡착볼을 개발하였다. ZLP 광촉매 흡착볼 제작을 위한 최적의 배합비는 Nano-ZnO:Laponite:PVA:deionized water의 구성비가 3:1:1:16 (by weight)으로 도출되었으며, PVA가 붕산과의 가교결합을 통해서 다층의 망(mesh network)과 막(film)을 형성하여 Laponite의 팽윤과 ZnO의 탈리 현상을 억제하는 것으로 사료된다. 수중안정성을 개선하고 비표면적을 높이기 위한 최적의 건조방법은 microwave를 활용하는 방법이며, SEM과 TEM의 분석을 통해 다양한 크기(55~500 ${\mu}m$)의 공극(pore)이 분포하며 ZnO의 균질한 분포를 확인할 수가 있었다. 메틸렌블루 광분해 특성은 반응 초기(40분)에는 Laponite와 메틸렌블루의 이온결합에 따른 흡착제거가 주요 제거 기작이며, 메틸렌블루의 흡착이 포화상태에 도달 후 광분해를 통한 제거가 발생함을 확인하여 흡착과 광분해가 동시에 발생하여 수중에 용해된 메틸렌 블루를 효과적으로 제거할 수 있음을 확인하였다. 본 연구를 통해 짧은 시간에 흡착과 광분해가 동시에 진행되어 난분해성 오염물질을 효과적으로 제거하는 광촉매 흡착볼의 제작이 가능하며, 나노물질의 탈리로 인해 발생하는 환경 및 수용체에 미치는 위해성도 최소화 할 수 있을 것으로 판단된다.

• 한국분말재료학회지
• /
• 제29권4호
• /
• pp.291-296
• /
• 2022

The green body of WC-Co cemented carbides containing polymeric binders such as paraffin, polyethylene glycol (PEG), and polyvinyl acetate (PVA) are prepared. The green density of the WC-Co cemented carbides increases with the addition of binders, with the exception of PVA, which is known to be a polar polymeric substance. The green strength of the WC-Co cemented carbides improves with the addition of paraffin and a mixture of PEG400 and PEG4000. In contrast, the green strength of the WC-Co does not increase when PEG400 and PEG4000 is added individually. The compressive strength of the green body increases to 14 MPa, and the machinability of the green body improves when more than 4-6 wt% paraffin and a mixture of PEG400 and PEG4000 is used. Simultaneously, the sintered density of WC-Co is as high as 99% relative density, similar to a low binder addition of 1-2 wt%.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1053-1059
• /
• 1996

The pulse-echo response of the piezoceramics PZT-polymer 3-3 type composite transducers with various PVA additions were investigated. The PZT powder was prepared by the molten salt synthesis method. The porous PZT specimens will be used as a filler to make 3-3 type comosite were prepared from a mixture of PZT and polyvinylalcohol(PVA) sphere by utilizing BURPS(Bumout Plastic Sphere) technique. It was shown that the transmitting and receiving sensitivity of 3-3 type piezoelectric composite transducers could be improved than that of solid PZT transducers. The reason is that 3-3 type piezoelectric composite have low dielectric constant, density and acoustic impedance. The distance between transducer and reflector was in good agreement with the distance calculated from the longitudinal velocity of the specimens and receiving time observed pulse-echo responses on the ultrasonic transducer analyzer.