• 대한안전경영과학회지
• /
• 제22권1호
• /
• pp.15-21
• /
• 2020

Industrial Motors diagnostic equipment is highly dependent on the automation system, so if there are defects in the automation equipment, it can only rely on the operator's intuitive judgment.To help with intuitive judgment, Park's Vactor Approach(PVA) represents the current signal as a pattern of circles, so it can tell if a fault occurs when the circle is distorted. However, the failure to judge the degree of distortion of the circle pattern is the basis of the fault, so it will face difficulties. In this paper, in order to compare the faults of PVA, the period of d-axis current of PVA pulsation was mastered, so that two phase differences occurred in the same signal source. Through experiments, it is confirmed that this is a 90 degree cross formation of PVA, which is convenient for judging from the vision that there is no fault, thus helping the operator to make intuitive judgment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.43-44
• /
• 2006

We have studied electro-optical characteristics and stability of liquid crystal director depending on electrode patterning of common electrode on top substrate in patterned vertical alignment (PVA) mode. In the present studies, new type of common electrode pattern was suggested to enhance a dark state by reducing interference area due to data signal. According to the simulation result, PVA device with new common electrode pattern contributed to Improvement of an aperture ratio.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.43-44
• /
• 2006

We have studied effect of Patterned Vertical Alignment (PVA) mode on electro-optical characteristics and stability of liquid crystal director upon electrode pattering. In the present studies, LC director field and stability of conventional PVA mode electrode patterns were analyzed and new type of electrode patterns were suggested. At last, comparison between this new type of electrode patterns to conventional electrode pattern types were followed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.547-550
• /
• 2003

In this paper we report the optimization method of the pattern size of the electrodes in PVA LCD for the transflective mode in order to improve the optical characteristics. Moreover, we designed the electrode of PVA LCD so as to remove the driving voltage difference between transmissive mode and reflective mode. As a result, we expect very simple manufacturing process and high optical performance even if complex process such as a multi cell gap process and multi driving method are not applied

• 한국표면공학회지
• /
• 제42권2호
• /
• pp.59-62
• /
• 2009

Antireflection pattern, moth-eye structure, was fabricated on lens using Ultra Violet nanoimprint lithography and flexible template. Ni template with conical shaped structure was used as a master template to molding. The flexible poly vinyl alcohol template was fabricated by molding. This poly vinyl alcohol template was used as an imprint template of imprint at lens. Using Ultra Violet nanoimprint lithography and poly vinyl alcohol template, polymer based moth-eye structure was formed on lens and its transmittance was increased up to 94% from 92% at 550 nm wavelength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.549-552
• /
• 2007

Patterned vertical alignment (PVA) mode requires multi-domain to exhibit wide viewing angle whereas the transmittance is sacrificed. To overcome the demerit, a fine pattern was formed at folded region in PVA Z-shape electrode structure. In the present work fine patterns were formed near domain boundary regions where the unwanted field direction which causes the LC to tilt down in unwanted direction exists. Thereby transmittance is improved near those fine patterns. This method is very simple and more cost-effective process than the other methods. In this article, we show the method of fine pattern formation and its influence on LC molecule in PVA mode with Z-shape electrode structure.

• 공업화학
• /
• 제7권2호
• /
• pp.379-386
• /
• 1996

광 이량화 특성을 나타내는 1-methyl-4-[2-(4-diethylacetylphenyl)ethenyl] pridinium methosulfate(SbQ-A염)를 dimethyl sulfate, terephthalaldehyde mono-(diethyl acetal) 및 4-picoline을 이용하여 합성하였다. 합성된 SbQ-A염을 PVA와 반응시켜 동일(MW=77,000-79,000g/mol) 분자량을 가진 PVA내 SbQ의 함량이 다른 PVA-SbQ-H 시료 및 SbQ의 함량은 약 1.3mol%로 같으나 PVA의 분자량이 다른 PVA-SbQ-L들을 합성하였다. Gray scale(GS)법을 이용하여 측정된 PVA-SbQ 수용성 감광성 고분자의 상대감도는 PVA내 SbQ의 함량이 증가함에 따라 증가하였으며, PVA의 분자량이 낮아질수록 감소하였다. PVA-SbQ-H의 경우 SbQ 함량이 2.63mol%인 시료는 PVA에 ammonium dichromate가 혼합된 기존시료보다 90배 증가된 감도를 나타내었다. PVA-SbQ를 사용하여 형광체 슬러리를 제조하고 사진식각공정을 거쳐 형광체의 미세패턴을 형성하였다. 형광체 슬러리 제조시 양이온 계면활성제인 cetyltrimethyl ammonium chloride를 첨가제로 사용하면 형광면의 해상도가 증가됨을 알았다.

• 공업화학
• /
• 제18권1호
• /
• pp.71-76
• /
• 2007

수정진동자를 이용한 고분자의 상전이 현상의 해석에 있어서 중요한 인자라 할 수 있는 샘플의 극성 변화에 따른 공진저항의 변화 패턴을 설명하였다. 이를 위하여 친수성 물질로서 PVA (poly vinyl alcohol), 소수성 물질로서 PMMA/PVAc (poly methyl methacrylate/poly vinyl acetate)의 브랜딩 막을 수정진동자 전극 위에 코팅하여 사용하였다. 친수성 물질과 소수성 물질의 상호 비교에서 상전이와 연관하여 공진주파수 변화는 유사하게 나타났지만(같은 변화 Pattern), 공진저항은 서로 다른 변화의 형태로 관찰되었다. 이의 해석을 위하여 공진 파라미터 중의 커패시턴스($C_1$)와 수정진동자 금전극의 극성 등을 고려한 결과, 이러한 다양성이 타당하며, 재료의 극성에 따른 공진저항의 변화를 고려하여야만, 상전이 혹은 다양한 수정진동자 분석에 있어서 정확한 해석이 가능함을 설명하였다.

• 약학회지
• /
• 제31권1호
• /
• pp.25-32
• /
• 1987

The effect of loading dose, plasticiser and PVA molecular weight on naproxen release from hydrophilic polymer matrix was examined. Hydrophilic polymer matrix was prepared with PVA and PVP by adding glycerine as plasticiser. The release of naproxen from polymer matrix was determined in phosphate buffer medium. The release rate of naproxen from the polymer matrix increased as drug loading dose and plasticiser percentage increased. Raproxen released from the polymer matrix showed the time square root kinetics. Without changing the release-pattern, the release rate of naproxen could not be changed by varying molecular weight of PVA. Linearly released time range increased as drug loading dose increased, whereas decreased as plasticiser percentage increased up to 30%.

• Journal of Plant Biology
• /
• 제34권3호
• /
• pp.215-221
• /
• 1991

Photoxynthetic properties of polyvinylalcohol (PVA)-immobilized chloroplast especially regarded to stability of photosynthetic electron transport and the fluorescence induction pattern were studied. When isolated spinach chloroplasts were immobilized with PVA, it showed good preservation of photosynthetic electron transport activity, especially PS II activity, during storage at -15$^{\circ}C$, 4$^{\circ}C$ and 2$0^{\circ}C$. And immobilized chloroplasts revealed similar thermostability of whole chain electron transport to free chloroplsts. And the absorption peak of red band of chloroplasts showed the blue-shift of 2-4 nm after immobilization. Fv/Fm ratio of chlorophyll fluorescence slightly decreased after immobilization. White light pulse after continuous light do not induced the additional fluorescence rise. This means chlorophyll fluorescence at room temperature reached to Fmax under continuous light in the immobilized chloroplasts. It seems that PVA may be a good candidate for immobilization matrix for the preservation of photosynthetic function of thylakoids and for the continuous use of chloroplast membranes of higher plants for solar energy storage and conversion.