• The Plant Pathology Journal
• /
• v.15 no.1
• /
• pp.57-61
• /
• 1999

Xanthomonas campestris pv. glycines causes bacterial pustule disease on susceptible soybean leaves and produces a bacteriocin, named glycinecinA, against most xanthomonads including Xanthomonas campestris pv. vesicatoria. One of the 5 isolated DNA regions responsible for bacteriocin production, a 1.7 kb DNA region for the glycinecinA gene, was used as a probe to detect the presence of the homolog DNA in other bacterial strains. Among 55 bacterial strains tested, only X. campestris pv. glycines showed the positive signal with glycinecinA DNA. Two oligomers, heu2 and heu4, derived from a glycinecinA DNA were used to carry out the polymerase chain reaction (PCR) analysis with chromosomal DNA from 55 different bacterial strains including 24 different strains of X. campestris pv. glycines, 9 different pathovars of xanthomonads, and other 22 bacterial strains of different genus and species. By separation of the PCR products on agarose gel, a 0.86 kb DNA fragment was specifically detected when X. campestris pv. glycines was present in the amplification assay. The 0.86 kb fragment was not amplified when DNA from other bacteria was used for the assay. Southern analysis with glycinecinA DNA showed that the PCR signal was obtained with X. campestris pv. glycines isolates from various geographic regions and soybean cultivars. Therefore, the 1.7 kb DNA region for the glycinecinA gene can be used for the pathovar-specific probe for the DNA hybridization and the primers heu2 and heu4 can be used for the pathovar-specific primers for the PCR analysis to detect X. campestris pv. glycines.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.42-49
• /
• 2011

PV(Photovoltaic) system is environmentally friendly power system using solar energy in renewable energy. PV system compared to other renewable energy power generation systems is relatively easy to install, so the dissemination is increasing worldwide. Especially, BIPV(Building Integrated Photovoltaic) is a system that PV modules are installed on the building and use renewable energy. But this system is difficult to apply due to the shadow of adjacent buildings and limited installation. In this study, payback period is calculated by Retscreen 2010, that is an economic assessment software of renewable energy, on applied to the bridge of PV system. As results, this study aims at actively considering the application.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1489-1500
• /
• 2018

Partial shading analysis of large-scale photovoltaic (PV) arrays has recently become a theoretically and numerically challenging issue, and it is necessary for PV system designers. The main contributions of this study are the following: 1) A PSIM-based macro-model was employed because it is remarkably fast, has high precision, and has no convergence issues. 2) Three types of equivalent macro-models were developed for the transformation of a small PV sub-array with uniform irradiance to a new macro-model. 3) On the basis of the proposed new macro-model, a tearing method was established, which can divide a large-scale PV array into several small sub-arrays to significantly improve the efficiency improvement of a simulation. 4) Three platforms, namely, PSIM, PSpice, and MATLAB, were applied to evaluate the proposed tearing method. The proposed models and methods were validated, and the value of this research was highlighted using an actual large-scale PV array with 2420 PV modules. Numerical simulation demonstrated that the tearing method can remarkably improve the simulation efficiency by approximately thousands of times, and the method obtained a precision of nearly 6.5%. It can provide a useful tool to design the optimal configuration of a PV array with a given shading pattern as much as possible.

• Research in Plant Disease
• /
• v.6 no.1
• /
• pp.10-14
• /
• 2000

In 1998, bacterial shot hole of peach (Prunus persica) and Japanese plum(Prunus salicina) was found in Naju and Milyang. Five isolates of bacteria isolates from the diseased leaves and fruits of peach and Japanese plum were classified into genus Erwinia and Xanthomonas on diagnostic characteristics. Of five isolates, two were identified as X. campestris pv. pruni, three as E. nigrifluens. E.nigrifluens is the first description of bacteria which causes the disease on peach and Japanese plum in Korea. the symptoms caused by E. nigrifluens were hardly distinguished from those caused by X. campestris pv. pruni. In addition, it was observed that two pathogenic bacteria were isolated from most of naturally infected plants at the same time. from the reason mentioned above, we proposed to use a single common name \"bacterial shot hole of peach and Japanese plum\" for the both bacterial diseases, hereafter.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.263-268
• /
• 2008

Building Integrated PV(BIPV) is one of the best fascinating PV application technologies. To apply PV module in building, various factors should be reflected such as installation position, shading, temperature, and so on. Especially a temperature should be considered, for it affects both electrical efficiency of a PV module and heating/cooling load in a building. This study investigates a semitransparent PV module that is designed as finished material for windows. Therefore it needs to considerate about the optical characteristics of the transparent module. It reports the effect of thermal and optical characteristics of the PV module on generation performance. The study was performed by measuring sun spectrum and luminance through the PV modules and by monitoring the temperature and experiment. The results showed that 1 degree temperature rise reduced about 0.48% of output power.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.838-846
• /
• 2015

This paper deals with the modified modeling of PV system based on the PSCAD/EMTDC and optimal control method of customer voltages in real distribution system interconnected with the photovoltaic (PV) systems. In order to analyze voltage variation characteristics, the specific modeling of PV system which contains the theory of d-q transformation, current-control algorithm and sinusoidal PWM method is being required. However, the conventional modeling of PV system can only perform the modeling of small-scale active power of less than 60 [kW]. Therefore, this paper presents a modified modeling that can perform the large-scale active power of more than 1 [MW]. And also, this paper proposes the optimal operation method of step voltage regulator (SVR) in order to solve the voltage variation problem when the PV systems are interconnected with the distribution feeders. From the simulation results, it is confirmed that this paper is effective tool for voltage analysis in distribution system with PV systems.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.1
• /
• pp.81-89
• /
• 2006

Building integrated photovoltaic (BIPV) system operates as a multi-functional building construction material. They not only produce electricity, but also are building integral components such as facade, roof, window and shading device. On the other hands lots of architectural considerations should be reflected such as Installation position, shading, temperature effect and so on. As PV modules function like building envelope in BIPV, combined thermal and PV performance should be simultaneously evaluated This study is on the combined thermal and PV performance evaluation of BIPV modules. The purpose of this study is to investigate a temperature effect of PV module depending on the ventilation type of PV module backside. Test cell experiment was performed to identify the thermal and power effect of PV modules. Measurement results on the correlation of temperature and power generation were obtained. Those results can be utilized for the development of optimal BIPV installation details in the very early design stage.

• Journal of Periodontal and Implant Science
• /
• v.51 no.1
• /
• pp.30-39
• /
• 2021

Purpose: The present study was undertaken to examine whether periodontal probe visibility (PV) accurately reflects gingival thickness (GT) and to identify factors affecting PV using cluster and multivariate analyses. Methods: The clinical characteristics of the maxillary central incisors (n=90 subjects) were examined. Clinical photographs, sex, PV, probing depth, gingival width, papilla height, GT as measured with an ultrasonic device, and the ratio of crown width to crown length were recorded. Multivariate analysis, using multinomial baseline-category logistic regression, was used to identify factors predictive of PV. Cluster analysis was used to identify gingival biotypes. Results: In the multivariate analysis, sex was the only significant predictor of PV (odds ratio, 6.48). Two clusters of subjects were created based on morphometric parameters. The mean GT among cluster A subjects was significantly lower than that among cluster B subjects (P=0.015). No significant difference was found between cluster A and B subjects in terms of PV score (P=0.583). Conclusions: Periodontal PV was not associated with GT as measured directly using an ultrasonic device. Sex was a highly significant predictor of periodontal PV. GT was found to be correlated with morphological characteristics of the periodontium.

• Korean Journal Plant Pathology
• /
• v.12 no.1
• /
• pp.1-10
• /
• 1996

Xanthomonas campestris pv. vesicatoria의 감염으로 토마토 잎조직에 $\beta$-1, 3-Glucanases와 chitinases가 합성, 축적되었다. 그러나 접종되지 않은 건전한 잎에서는 위의 두 가지 가수분해 효소는 매우 낮은 수준으로 유지되었고, 이 두 가지 효소는 친화적 상호작용에서보다는 불친화적 상호작용에서 더욱 높은 수준으로 존재하였다. 이것은 $\beta$-1, 3-glucanases와 chitinases가 X. c. pv. vesicatoria의 생육에 대한 방어기작으로서 중요한 역할을 한다는 것을 시사해 주고 있다. Native PAGE 젤 상에서 $\beta$-1, 3-glucanases를 분리한 결과, 병징 발현이나 저항성 발현에 중요한 역할을 하는 것으로 생각되는 산성 isoform Ga 1과 염기성 isoform Gb 1의 isoform bands만 확인되었다. Isoelectric focusing을 이용하였을 때, 적어도 pI 6.4와 pI 8.6을 지닌 두 개의 $\beta$-1, 3-glucanases의 isoform을 확인할 수 있었고, 특히 불친화적 상호작용에서 더욱 뚜렷하게 유도되었다. 이것은 병 진전과정에서 X. c. pv. vesicatoria에 대해 저항성 발현에 관여한다는 것을 나타내고 있다. 산성 chitinase isoform인 Ca 1의 활성은 병원균의 감염이 진전되는 동안 감소하였다. 또한 다섯 개의 염기성 chitinase isoform이 감염된 토마토 잎 조직에서 발견되었는데, 특히 토마토의 방어기작에 관여하여 병원화적 균주 Bv5-4a에 감염된 잎에서만 유도, 축적되었다. Isoelectric focusing(IEF)을 이용한 후 적어도 2개의 산성과 4개의 염기성 chitinase isoform이 감염된 토마토 잎 추출액에서 확인되었다. Native PAGE 젤에서 isoform Cb 1에 해당되는 pI 9.5를 지닌 chitinase isoform은 오직 불친화적 상호작용에서만 확인되었다. 이온이 제거된 Triton X-100을 처리하여 renaturation 시킨 후에 SDS-PAGE 젤 상태에서 23 kDa과 26 kDa을 지닌 2개의 chitinase isoform을 확인하였다.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.1
• /
• pp.57-64
• /
• 2005

The present society have been polluted the earth environment by the rapid industrial growth. So, the meaning of sustainable development is doing more important. Therefore the technology skills of sustainable architecture techniques have been studied many-side of energy as like energy saving and substitutive energy. But, See the studies until now, there have been just one system either energy saving or substitutive energy. So, the paper studies about energy saving system with substitutive energy system(the double-skin facade system with PV modules) and presents the performance of system through the analysis of reduction of the energy load, the solar radiation on the slope angle of PV module, the blind effect in system.