• 제목/요약/키워드: PV module surface temperature

검색결과 42건 처리시간 0.018초

반사방지막(ARC)의 SiO2 구조에 따른 PERC 태양전지 PID 열화 완화 상관관계 연구 (Mitigation of Potential-Induced Degradation (PID) for PERC Solar Cells Using SiO2 Structure of ARC Layer)

  • 오경석;박지원;천성일
    • Current Photovoltaic Research
    • /
    • 제8권4호
    • /
    • pp.114-119
    • /
    • 2020
  • In this study, Mitigation of Potential-induced degradation (PID) for PERC solar cells using SiO2 Structure of ARC layer. The conventional PID test was conducted with a cell-level test based on the IEC-62804 test standard, but a copper PID test device was manufactured to increase the PID detection rate. The accelerated aging test was conducted by maintaining 96 hours with a potential difference of 1000 V at a temperature of 60℃. As a result, the PERC solar cell of SiO2-Free ARC structure decreased 22.11% compared to the initial efficiency, and the PERC solar cell of the Upper-SiO2 ARC structure decreased 30.78% of the initial efficiency and the PID reliability was not good. However, the PERC solar cell with the lower-SiO2 ARC structure reduced only 2.44%, effectively mitigating the degradation of PID. Na+ ions in the cover glass generate PID on the surface of the PERC solar cell. In order to prevent PID, the structure of SiNx and SiO2 thin films of the ARC layer is important. SiO2 thin film must be deposited on bottom of ARC layer and the surface of the PERC solar cell N-type emitter to prevent surface recombination and stacking fault defects of the PERC solar cell and mitigated PID degradation.

태양전지 Ribbon 두께와 조성에 따른 Ribbon접합부의 장기 신뢰성 특성에 관한 연구 (The Study on the Long-term Reliability Characteristics of Ribbon Joint: Solar Cell Ribbon Thickness and Solder Compositions)

  • 전유재;강민수;소경준;이재준;신영의
    • 에너지공학
    • /
    • 제23권4호
    • /
    • pp.88-94
    • /
    • 2014
  • 본 논문에서는 실리콘 태양전지의 Ribbon 접합부에 대한 장기 신뢰성 평가를 위해 Ribbon 두께와 솔더 조성을 달리하여 (A-type:0.2mm/SnPb, B-type:0.25mm/SnPb, C-type:0.2/SnA gPb, D-type:0.25mm/SnAgPb) 열충격 시험을 수행하였다. 열충격 시험 조건은 $-40^{\circ}C$에서 $85^{\circ}C$로 각각 15분씩 30분을 1 cycle로 하여 600 cycle을 수행하였다. 그 결과 초기효율은 A-type이 15.0%, B-type이 15.4% 및 C, D-type이 15.8%를 나타냈으며, 열충격 시험 후 초기효율 대비 효율감소율은 A-Type이 13.8%, B- Type이 15.4%, C-Type이 15.3% 및 D-Type이 16.2%을 나타냈다. I-V 특성곡선 및 표면변화를 비교한 결과, 표면의 변화는 큰 차이가 없었으나, A, C-Type의 시편에서는 직렬저항이 증가하였고, C-Type의 I-V 특성곡선 Current 저하 시작점이 A-Type보다 0.05(V)빠르게 나타났다. B, D-Type에서는 직렬저항 증가 및 병렬저항 감소의 복합적인 효율 저하 특성이 나타났으며, Cell 손상도 확인할 수 있었다. SnAgPb계열 솔더를 사용한 시편이 초기 접합성 및 효율 측면에서 우수하였으나, 장기신뢰성에서 취약하였으며, Ribbon 두께가 두꺼울수록 장기신뢰성이 저하되는 것을 확인 할 수 있었다.