• Journal of Biosystems Engineering
• /
• v.24 no.6
• /
• pp.473-478
• /
• 1999

Recently, it is necessary fir surface materials to be low cost and to keep well endurable and wear in machinery field. Since most good materials with endurance and wear are expensive, they are being studied hard to modify to surface materials with endurance and wear, which overlay with the surface membrane completely. One of them is PTA(Plasma Transferred Arc Overlaying Process) method, which gets into the spotlight. It is thought to be an optimum method, since this method of overlays properly materials with about 3∼5cm surface membrane. It is necessity for the modified materials with endurance and wear to improve within the agricultural environment. Therefore, this research was used the PTA method to endure and wear a material. This method proved to be a reliable method for overlaying the membrane on the materials of an economical agricultural machinery.

• Journal of Welding and Joining
• /
• v.24 no.3
• /
• pp.49-54
• /
• 2006

The Plasma Transferred Arc (PTA) overlaying method is lately introduced as one of the most useful surface modification method of the engine component. In this paper, the characteristics of the Co-base and Ni-base super alloy overlay layers by PTA method were investigated through the metallurgical, abrasive and cavitation erosion test. Experimental results showed that the abrasive wear resistance of the Co-base Stellite 6 overlayer was the most superior and followed in order of Nimonic 80A, Inconel 625 and Inconel 718. However, the cavitation erosion characteristic of the Stellite 6 overlayer was the most inferior and it was better in order of Inconel 625, Inconel 718 and Nimonic 80A.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.138-145
• /
• 1999

Surface hardening of AC4C aluminium alloy with TiC powders was obtained by plasma transferred are (PTA) method, Bead appearance, microstrucutre and wear behavior were characterized in relation to the torch current, powder feed rate and wear condition. The width and the depth of bead were mainly increased with increasing torch current. The comparison of wear behavior between AC4C alloy and PTA treated AC4C alloy showed the remarkable enhancement of wear resistance.

• Journal of Welding and Joining
• /
• v.27 no.3
• /
• pp.80-84
• /
• 2009

The Plasma Transferred Arc (PTA) overlay welding method is lately introduced as one of the most useful surface overlay method of the engine component. In this paper, the overlay welding on the SNCrW heat resisting alloy was conducted by the PTA overlay welding process using the super alloy powder. The characteristics of the overlay layers were investigated through the metallurgical and abrasive test. Experimental results showed that the overlay on the SNCrW heat resisting alloy surface was successfully made without hot cracking. The friction wear characteristics of the Co-base Stellite 6 overlayer were most superior. However the abrasive wear characteristics were most inferior in the Co-base Stellite 6 overlayer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.7
• /
• pp.852-856
• /
• 2007

The Plasma Transferred Arc(PTA) overlay welding method is lately introduced as one of the most useful surface overlay method of the engine component. In this paper, the overlay welding method on the Nimonic super alloy was established by the PTA overlay welding process using the same super alloy powder. The characteristics of the Co-base and Ni-base super alloy overlay layers were investigated through the metallurgical, abrasive and cavitation erosion test. The abrasive and cavitation characteristics were investigated at room and high temperature.

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.517-524
• /
• 2002

An overlaying of the seating surfaces of engine valves by OAW, GTAW or PTA weldings are common practice. The OAW method of a lower torch energy density compared to GTAW and PTA methods produces smoother deposits but the pain size at the vicinity of the interface is increased remarkably up to $30~50{\mu\textrm{m}}$ (that of base metal is about $10\mu\textrm{m}$). It's grain coarsening and the solute dilution are related to the decarburizing during OAW could be minimized by reducing the preheating temperature and by maintaining the carbide precipitates in base metal prior to welding. The formation of columnar structures and carbide precipitation zone in the vicinity of the GTAW welded interface, because of the high heat concentration, causes weakened zone on the valve seat face. The width of the reaction boundary zone is about $50\mu\textrm{m}$ for PTA and GTAW overlaying, and about $150\mu\textrm{m}$ for OAW welding. The smaller width of the reaction boundary zone is the less the solute-dilution rate. Thereby PTA welding may be recommended for overlaying of the seating surfaces.

• Journal of KIISE:Databases
• /
• v.29 no.6
• /
• pp.429-440
• /
• 2002

Temporal databases manage time-evolving data. They provide built-in supports for efficient recording and querying of temporal data. The temporal aggregate in temporal databases is an extension of the conventional aggregate to include time concept on the domain and range of aggregation. This paper focuses on multidimensional temporal aggregation. In a multidimensional temporal aggregate, we use one or more general attributes as well as a time attribute on the range of aggregation, thus it is a useful operation for historical data warehouse, Call Data Records(CDR), etc. In this paper, we propose a structure for multidimensional temporal aggregation, called PTA-tree, and an aggregate processing method based on the PTA-tree. Through analyses and performance experiments, we also compare the PTA-tree with the simple extension of SB-tree that was proposed for temporal aggregation.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.153-161
• /
• 2011

As the problem of GOSST building belongs to NP compete domain, heuristics for the problem ask for immense amount execution time and computations in large scale inputs. In this paper, we propose an efficient mechanism for GOSST construction using space locality PTAS. For 40,000 input nodes with maximum weight 100, the proposed space locality PTAS GOSST with 16 unit areas can reduce about 4.00% of connection cost and 89.26% of execution time less than weighted minimum spanning tree method. Though the proposed method increases 0.03% of connection cost more, but cuts down 96.39% of execution time less than approximate GOSST method (SGOSST) without PTAS. Therefore the proposed space locality PTAS GOSST mechanism can work moderately well to many useful applications where a greate number of weighted inputs should be connected in short time with approximate minimum connection cost.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.188-194
• /
• 2010

In this paper, the typical Synthetic Aperture Radar (SAR) image quality parameters and analysis method are defined, and the SAR image analysis tool is presented for SAR image evaluation. The structure of the developed SAR image analysis tool consists of four key modules; point target analysis (PTA) module, distributed target analysis (DTA) module, ambiguity analysis (AMA) module, and NESZ analysis (NESZA) module. The developed tool is able to extract the various SAR system parameters from standard SAR product format files. Based on these extracted system parameters, typical SAR image quality parameters are derived from SAR image data.

• Journal of Sasang Constitutional Medicine
• /
• v.33 no.4
• /
• pp.23-31
• /
• 2021

Objective The case report showed that sudden hearing loss and tinnitus after trigeminal schwannoma surgery were improved with Yeoldahansotang-gamibang. Method The patient was diagnosed with Taeeumin interior heat (Ganyeol) disease based on the original symptoms of Taeeumin. He was treated with herbal medicine and acupuncture treatment. Puretone audiometry (PTA), speech audiometry, tinnitus handicap inventory (THI) and the original symptoms were investigated before and after the treatment. Results Right side PTA score was significantly reduced, speech audiometry was improved in speech reception threshold (SRT), word recognition score (WRS) and most comfortable level (MCL) and THI score decreased from 40 to 0, which showed normalizing hearing function. And the patient revealed improvements in sleeping, digestion, stooling, perspiration and facial sensation after treatment. Conclusion This study suggests that Yeoldahansotang-gamibang is effective on sudden hearing loss and tinnitus after surgery by correcting the imbalanced energy of Taeeumin.