• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.1-5
• /
• 1995

In this study, a piezoelectric fan was fabricated using piezoelectric element of 0.13PZN-0.41PZ-0.46PT prepared by extruding method. The sizes of the piezoelectric element and the piezoelectric fan were adjust to utilize commercial ac source(100V, 6OHz). The size of the piezoelectric element was $0.26{\times}19.5{\times}45$mm and the resonant frequency and the electromechanical coupling coefficient were 31.26KHz, 31.58% respectively. The size of the piezoelectric fan was $0.62{\times}19.5{\times}78.5$mm and the maximum displacement was 40mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.15-18
• /
• 1993

Piezoelectric Actuator and electrostrictive Actuator samples were fabricated using PMN-PT-PZ system ceramics with Barium substitution, and the strain properties of them investigated. The largest Piezoelectric coefficient and electromechanical coupling coefficient were observed at sintering temperature $1250^{\circ}C$, Barium 0.05 mol %. The strain of poled samples is observed twice highly then unpoled ones, and the former showed larger hysteresis in strain then the latter, too. Poled multilayered actuator samples showed considerable strain.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.152-156
• /
• 2004

The dielectric and piezoelectric properties of 0.36Pb($Sc_{1/2}Nb_{1/2}$)$O_{3}$-0.25Pb($Ni_{1/3}Nb_{2/3}$)$O_{3}$-0.39Pb$TiO_{3}$ (hereafter PSNNT) at the morphotropic phase boundary (MPB) composition were investigated with $0{\sim}2.5$ mot% $MnO_{2}$ doping. Bulk density, dielectric loss and tetragonality of crystal structure were all improved with increasing $MnO_{2}$ additive content. With increasing $MnO_{2}$ additive content, the electromechanical coupling factor and quality factor were also increased: Electromechanical coupling $k_{p}$ and quality factor $Q_{m}$ at 2.0 mol% $MnO_{2}$ doping with were showed highest values of 55.6 % and 252, respectively.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1481-1483
• /
• 1994

The dielectric and electrical properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3-BaTiO_3$ have been investigated. Perovskite crystalline phase of the specimens is confimed by XRD. The curie temperature decrease with increasing $BaTiO_3$ and hysteresis phenomena decrease with increasement of $BaTiO_3$. The strain vs. applied voltage characteristics exhibit nonlinear relationship and the specimen. of 0.9PMN-0.08PT-0.02BT shows the largest strain.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.63-69
• /
• 2000

Electrically-induced strain(S) and polarization(P) for Pb(Sc1/2Nb1/2)O3-PbTiO3(1-x)PSN-xPT) crystalline solutions were studied. From the compositional dependence of S and P we could observe two maximum values at x=0.10 and x=0.425. It is considered that PSNT10(x=0.10) composition is the structural phase boundary to indicate the variable order-disorder[VOD] region. PSNT(x=0.425) composition is the morphotropic phase boundary[MPB] to indicate the rhombohedral to tetragonal phase transition. Higher S (0.437%) and P (0.3974$\mu$C/$\textrm{cm}^2$) values were attained by the La substitution (5 wt%) at Pb site in the MPB composition of 57.5PSN-42.5PT.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.196-198
• /
• 1994

The dielectric and electrical properties of $Pb(Mg_{1/3}Nb_{2\3})O_3-PbTiO_3-BaTiO_3$ have been investigated. Perovskite crystalline phase of the specimens are confirmed by XRD at $1270^{\circ}C$. The curie temperature is around $40^{\circ}C$ with the amount of $BaTiO_3$ and $PbTiO_3$. Every specimens shows the slim loop hysteresis curves which is electrostrictive characteristic. The strain vs. applied voltage characteristics exhibits nonlinear relationship, and the specimen of 0.85PMN-0.125PT-0.025BT shows the largest strain.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2004.10a
• /
• pp.85.1-85.1
• /
• 2004

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.156-156
• /
• 2000

The piezoelectric properties and the doping effect for $0.95Pb(Zr_xTi_{l-x})O_3+0.O5Pb(Mn_{1/3}Nb_{2/3})O_3$compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the value of $k_p$ and ${\varepsilon}_{33}^T$ were maximized, but $Q_m$ was minimized $(k_p=0.57, Q_m=1550)$ in the composition of x=0.51. In order to increase the values of $Q_m$, $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of $k_p$ decreased, and the values of $Q_m$ increased with doping concentration of $Nb_2O_5$ . As a experiment results under high electric field driving, when vibration velocity was ower than 0.6[m/s], the temperature increase was 20[℃], and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.91-93
• /
• 1989

x $Pb(Sb_{1/2}Sn_{1/2})O_3-PbTiO_3-PbZrO_3$, (0.05$\leq$x$\leq$0.30) ternary compound ceramics were fabricated by the mixed oxide method. The sintering temperature and time were $1200{\sim}1300[^{\circ}C]$, 2 hour, respectively. Increasing the PSS contents, the transition temperatures were decreased. The relative dielectric constant and Curie temperature of the 0.30PSS-0.20PT-0.50PZ specimens were 372, 190[$^{\circ}C$]. The pyroelectric coefficient, figure of merits for pyroelectric current and detectivity of the 0.25PSS-0.25PT-0.50PZ specimens had the good values, $5.41{\times}10^{-8}[C/cm^{2}K]$, $27.72{\times}10^{-12}[Ccm/J]$, $7.65{\times}10^{-10}{Ccm/J]$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.42-45
• /
• 1992

In this study, the structural, dielectric and electrical properties of $0.85Pb(Zn_{1/3}Nb_{2/3})O_3-0.1BaTiO_3-0.05PbTiO_3$ ceramics were investigated with respect to the variations of $La_2O_3$ addition amount. The specimen with 0.2 [wt%] $La_2O_3$ addition amount, which has the coupling constants with the value of $k_p$=44.8[%]. $k_{31}$=25.4[%] and the piezoelectric constant with $d_{31}=100{\times}10^{-12}$[C/N] respectively, exhibits the relatively good values in the applications of electrostriction actuators.