• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.675-680
• /
• 1992

The purpose of this investigation was to study the stability of perovskite structure, the variation of electrical properties and a microstructure with varing amount of PbTiO3 additive in PZN-PT-BT system. The results are as follows: 1. The pyrochlore phase was reduced as the amount of PbTiO3 additive was increased and completely eliminated at 0.15PT in PZN-PT-BT system. 2. The aging rate was increased in proportion to tetragonality because the internal stress was increased in proportion to tetragonality. 3. On increasing the amount of PbTiO3 additive, the Curie temperature was increased in proportion to tetragonality. 4. As the amount of PT in the composition increase, the variation of dielectric constant was sharpened and the diffuseness of the transition decreased.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.63-68
• /
• 2019

온도 및 압축응력 변화에 따른 PIN-PMN-PT계 압전 단결정의 유전 특성과 압전 특성을 조사하였다. 단결정의 결정상은 110℃ 영역에서 강유전 rhombohedral 구조에서 tetragonal 구조로, 190℃ 영역에서 tetragonal 구조로부터 상유전 cubic 구조로 변화하였다. 전계 인가에 따른 분극 및 변위의 변화율로부터 압전상수와 비유전율을 계산하였으며, 이는 계측기로부터 측정된 값과 유사한 수준을 나타내었다. 샘플에 인가되는 압축응력이 증가할수록 압전상수 d₃₃과 비유전율값은 증가하는 경향성을 나타내었다. 측정 온도 5℃에서 샘플에 인가되는 압축응력이 60 MPa인 경우 d₃₃ 값이 4500 pC/N로 계산되었으며, 측정 온도 60℃인 경우, 샘플에 인가되는 압축응력이 40 MPa 일 때 비유전율 62000이 계산되었다. 압축응력이 높아질 때 압전상수와 비유전율 값이 상승한 것은 rhombohedral 상에서 orthorhombic 상으로의 전이에 기인한 것으로 판단된다.

• Journal of Microbiology and Biotechnology
• /
• 제30권9호
• /
• pp.1420-1429
• /
• 2020

Corynebacterium glutamicum, an important industrial strain, has a relatively slower reproduction rate. To acquire a growth-boosted C. glutamicum, a descendant strain was isolated from a continuous culture after 600 generations. The isolated descendant C. glutamicum, JH41 strain, was able to double 58% faster (t_d=1.15 h) than the parental type strain (PT, t_d=1.82 h). To understand the factors boosting reproduction, the transcriptomes of JH41 and PT strains were compared. The mRNAs involved in respiration and TCA cycle were upregulated. The intracellular ATP of the JH41 strain was 50% greater than the PT strain. The upregulation of NCgl1610 operon (a putative dyp-type heme peroxidase, a putative copper chaperone, and a putative copper importer) that presumed to role in the assembly and redox control of cytochrome c oxidase was found in the JH41 transcriptome. Plasmid-driven expression of the operon enabled the PT strain to double 19% faster (t_d=1.82 h) than its control (t_d=2.17 h) with 14% greater activity of cytochrome c oxidase and 27% greater intracellular ATP under the oxidative stress conditions. Upregulations of genes those might enhance translation fitness were also found in the JH41 transcriptome. Plasmid-driven expressions of NCgl0171 (encoding a cold-shock protein) and NCgl2435 (encoding a putative peptidyl-tRNA hydrolase) enabled the PT to double 22% and 32% faster than its control, respectively (empty vector: t_d=1.93 h, CspA: t_d=1.58 h, and Pth: t_d=1.44 h). Based on the results, the factors boosting growth rate in C. gluctamicum were further discussed in the viewpoints of cellular energy state, oxidative stress management, and translation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.377-380
• /
• 2005

In this paper, accelerated stress test(AST) for Magnetic Switch (MS) are applied to assure specified reliability of the products. Magnetic contactor that functions with over-current relay is called MS. Magnetic contactor closes and opens the motor load with ON/OFF switch of electronic contactor. It is also used for protecting and controlling the load. Magnetic contactor detects the over-current flow in the load with a over-current relay and disconnects the load by opening its control power. In this study, AST for product assembly are developed in order to improve the weak point so that increase the product reliability. Also we will show the basic information for the accelerated life test(ALT). The proposed AST results and procedures may be extended and applied to testing similar kinds of products to reduce test times and costs of the tests remarkably. Finally the results of this study will contribute to improving reliability of products and strengthening competitiveness of our products in the world markets.

• 동의생리병리학회지
• /
• 제23권5호
• /
• pp.1019-1024
• /
• 2009

Diabetic neuropathy is characterized by the decrease of cell viability in neuron, which is induced by the hyperglycemia. HT22 cell is the neuron cell line originated from hippocampus. Ginsenosides have been reported to retain anti-diabetic effect. However, the preventive effect of ginsenosides in the condition of diabetic neuropathy was not elucidated. Thus, this study was conducted to examine the protective effect of ginsenoside total saponin (GTS), panoxadiol (PD), and panoxatriol (PT) in the high glucose-induced cell death of HT22 cells, an in vitro cellular model for diabetic neuropathy. In present study, high glucose increased lactate dehydrogenase(LDH) activity, the lipid peroxide(LPO) formation and induced the decrease of cell viability. These effects were completely prevented by the treatment of GTS, but partially prevented by the treatment of PD and PT. High glucose also increased the expression of Bax and cleaved form of caspase-3 but decreased that of Bcl-2. These effects of high glucose on Bax, Bcl-2 and cleaved form of caspase-3 were completely prevented by the treatment of GTS, but partially prevented by the treatment of PD and PT in HT22 cells. In conclusion, ginsenosides prevented high glucose-induced cell death of hippocampal neuron through the inhibition of oxidative stress and apoptosis in HT 22 cells.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.896-899
• /
• 2002

Microcellular foaming Process has several merits, impact strength elevation, thermal insulation, noise insulation, and raw material saving etc. This method make the glass transition temperature of polymers low, and diminish the residual stress of polymers. This characteristics of Microcellular foaming process influences the physical properties of recycled polymers. This paper describes about the impact strength change of Microcellular foamed recycled ABS.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.354-357
• /
• 1995

Measurements of X-ray diffuse scatterings were made in disordered single crystal of Fe-28.3 at%Pt Invar alloy around a 200-Bragg peak in a wide temperature range between 15 K and 300 K. Observed diffuse scatterings were almost spherical, suggesting a homogeneous disordered alloy. However, the qdependence of the observed thermal diffuse scattering was different from the usual type, indicating a possibility of existence of local distortion of lattice accompanied by a large gradient of stress.

• 한국재료학회지
• /
• 제6권9호
• /
• pp.937-942
• /
• 1996

박막 공정 및 마이크로머시닝(micromachining)기술에 의해 제작되는 마이크로 가스 센서는 고온 동작이 필수불가결하며 이 때 안정된 출력을 얻기 위해서 센서 저항 변화에 영향을 줄 수 있는 응집화 현상이 발생하지 말아야 한다. 본 연구에서는 고온 동작시 응집화의 구동력으로 작용하는 여러 요소중의 하나인 응력(stress)을 줄이기 위해서 인가 전력 밀도, 기판온도, 증착 압력 등을 증착 변수로 하여 증착 조건이 (AI, SI)1-xOx박막과 Pt 박막의 제반 물성 및 응력변화에 미치는 영향에 대하여 연구하였다. (AI, SI)1-xOx박막의 증착 속도와 굴절율 값은 O2분압과 기판 온도가 증가할수록 감소하였으며 응력은 O2분압이 증가함에 따라 인장에서 압축으로 전환된 후 증가하였다. Pt 박막의 경우, 인가 전력이 증가할수록 공정 압력이 감소할수록, 기판 온도가 감소할수록 증착 속도는 증가하였으며 전기 비저항은 감소하였다. Pt 박막의 응력은 인가 전력이 증가할수록, 공정 압력이 증가할수록, 기판 온도가 증가할수록 압축에서 인장의 방향으로 전환된 후 증가하였으며 박막의 전기비저항 및 증착속도에 크게 의존하는 것으로 분석되었다.

• Nuclear Engineering and Technology
• /
• 제43권3호
• /
• pp.301-308
• /
• 2011

The diametral creep of pressure tubes (PTs) in CANDU (CANada Deuterium Uranium) reactors is one of the principal aging mechanisms governing the heat transfer and hydraulic degradation of the heat transport system (HTS). PT diametral creep leads to diametral expansion, which affects the thermal hydraulic characteristics of the coolant channels and the critical heat flux (CHF). The CHF is a major parameter determining the critical channel power (CCP), which is used in the trip setpoint calculations of regional overpower protection (ROP) systems. Therefore, it is essential to predict PT diametral creep in CANDU reactors. PT diametral creep is caused mainly by fast neutron irradiation, temperature and applied stress. The objective of this study was to develop a bundle position-wise linear model (BPLM) to predict PT diametral creep employing previously measured PT diameters and HTS operating conditions. The linear model was optimized using a genetic algorithm and was devised based on a bundle position because it is expected that each bundle position in a PT channel has inherent characteristics. The proposed BPLM for predicting PT diametral creep was confirmed using the operating data of the Wolsung nuclear power plant in Korea. The linear model was able to predict PT diametral creep accurately.

• Journal of Nutrition and Health
• /
• 제37권9호
• /
• pp.817-824
• /
• 2004

The purpose of this study was to analyze the intake of antioxidant vitamins and plasma TRAP concentrations of 60 maternal-infant pairs (30 in normal term delivery group, NT; 30 in preform group, PT) We also investigated the relationship between plasma TRAP levels of maternal-umbilical cord blood and pregnancy outcomes. Mean energy intakes of NT and PT pregnant women were 93.2% and 85.4% and their protein intakes were 113.3% and 110.9% of the recommended dietary allowance (RDA), respectively. The vitamin A intakes of NT and W pregnant women were 559.7 RE and 497.8 RE, which were less than RDA. While the vitamin E and C intakes of both NT and PT pregnant women were more than RDA. The maternal plasma TRAP level of PT was 1.41 mmol/l and that of was 1.50 mmol/l, which was significantly higher than TRAP level of PT (p < 0.05) . The umblical cord plasma TRAP levels of NT and PT were 1.44 mmol/l and 1.23 mmol/l, which indicates the significant difference between those two groups (p < 0.001) . In case of comparing the TRAP level of maternal and umbilical cord blood, there was no significant difference in NT pregnant women, however, in PT group maternal the TRAP level significant higher than that of umbilical cord (p < 0.001). The length of gestation and plasma TRAP level of maternal and umbilical cord showed a positive correlation. However, other parameters of pregnancy outcomes such as birth weight, weight gain, and Apgar score were not affected by the plasma TRAP levels. Based on these results, preform infants could have a risk of oxidative stress because of low plasma TRAP level.