• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.295-301
• /
• 2023

Thermoelectric (TE) energy harvesting, which converts available thermal resources into electrical energy, is attracting significant attention, as it facilitates wireless and self-powered electronics. Recently, as demand for portable/wearable electronic devices and sensors increases, organic-inorganic TE films with polymeric matrix are being studied to realize flexible thermoelectric energy harvesters (f-TEHs). Here, we developed flexible organic-inorganic TE films with p-type Bi_0.5Sb_1.5Te₃ powder and polymeric matrices such as poly(3,4-eethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and poly (vinylidene fluoride) (PVDF). The fabricated TE films with a PEDOT:PSS matrix and 1 wt% of multi-walled carbon nanotube (MWCNT) exhibited a power factor value of 3.96 µW·m^-1·K^-2 which is about 2.8 times higher than that of PVDF-based TE film. We also fabricated f-TEHs using both types of TE films and investigated the TE output performance. The f-TEH made of PEDOT:PSS-based TE films harvested the maximum load voltage of 3.4 mV, with a load current of 17.4 µA, and output power of 15.7 nW at a temperature difference of 25 K, whereas the f-TEH with PVDF-based TE films generated values of 0.6 mV, 3.3 µA, and 0.54 nW. This study will broaden the fields of the research on methods to improve TE efficiency and the development of flexible organic-inorganic TE films and f-TEH.

• Journal of Sasang Constitutional Medicine
• /
• v.36 no.1
• /
• pp.13-30
• /
• 2024

Objectives This study aimed to analyze the influence of various sleep-related factors that affect sleep quality by each Sasang type. Methods A total of 400 subjects were included for this study, 108 males and 292 females. Sasang type was diagnosed using the SCAT. Then, the characteristics of each Sasang type were analyzed using HRV, DITI, and PSQI, PSS, and SDFI questionnaires. Logistic regression analysis was used to predict sleep-related factors that affect sleep disorders by Sasang types. Results This study shows that the pathophysiological characteristics for stress and digestive function of each Sasang type can differentiate sleep management through a logistic regression model including subscales of PSS and SDFI. Stress had no effect on the occurrence of sleep disturbance within only So-Eum, since the stress level is originally high in the So-Eum regardless of sleep quality. Rather, decreased appetite and poor eating habits had a significant impact on the decline in sleep quality. In addition, poor digestion and eating habits in So-Yang had a greater impact and poor digestion in Tae-Eum had a greater impact on the decline in sleep quality. Conclusion The stress and subscales of digestive function provide differentiated sleep management in So-Yang, Tae-Eum, and So-Eum types. The individualized sleep management for each Sasang type with statistically validated PSS and SDFI would be useful for sleep-related experts planning safe and effective person-centered health care as well as for Western clinicians who want to incorporate Sasang typology into their treatments as integrative medical technique in the future.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.294-296
• /
• 2003

본 논문에서는 우리나라 7개 지역의 시송전 선로를 구성하여 전력계통안정화장치(Power System Stabilizer)의 특성을 분석한다. Black start 발전기의 전력은 각 지역의 시송전 경로를 통하여 우선공급발전기에 공급한다. 이는 한국전력거래소(KPX)에서 규정하고 있으며, 주선로와 예비선로로 구성되어 있다. PSS의 성능 분석은 PSS1A type을 부착하여 수행하였다. 시뮬레이션 패키지는 EMTDC를 사용하여 그 특성을 검토하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.1
• /
• pp.7-11
• /
• 2014

Recently, the buffer layers consisting of poly (3,4-ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT-PSS) are extensively used to improve power conversion efficiency (PCE) of organic solar cells. However, PEDOT-PSS is not suitable for mass production of organic solar cells due to its intrinsic acid and hygroscopic properties. Moreover, because of chemical reactions between indium tin oxide (ITO) layer and PEDOT-PSS layer, the interface is not stable. For these reasons, alternative materials such as $V_2O_5$ have been developed to be an effective buffer layer. In this work, we used $V_2O_5$/Ag/ITO multilayer structure for the anode buffer layer. With variation of thickness of Ag layer, we investigated the optical and electrical properties of $V_2O_5$/Ag/ITO multi-layer films. As a result, we found that the electrical properties were improved with increasing Ag thickness while optical transmittance decreases in visible wavelength region. From the calculation of figure of merit (FOM) which is used to evaluate proper structure for transparent of optoelectronic, $V_2O_5$/Ag/ITO multilayer electrode was optimized with 4 nm thick Ag layer in optical (88% in transmittance) and electrical ($4{\times}10^{-4}{\Omega}cm$) properties. This indicates that $V_2O_5$/Ag/ITO multilayer electrode could be a candidate for the anode of optoelectronic devices.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.9
• /
• pp.315-324
• /
• 1983

Dynamic stability problems have been experienced with a generator connected to an infinite bus through a long transmission line. Nuclear turbine-generator units #1 and #2 at the Winsconsin Electric Power Point Baech Station were found to be dynamically unstable when one unit is isolated on one of the lines to Milwaukee or when two units are isolaed on the lines to milwaukee. Power System Stabilizers(PSS) were applied to the excitation system to provide stable operation under these conditions. Suitable settings for the PSS were predetetermined analytically by computer method and root licus analysis of an equivalent single machine-infinite bus configuration. This procedure allows graphical approach to the design of power stabilizers and serves as assynthesis procedure when the design constraints are relaxed so the the speed stabilizer is required ro provide animprovement in system damping. A simplified model of the complete exciter generator system is shown to be adequate for this type of analysis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.280-285
• /
• 2006

The current study was conducted to investigate the relationship between stress related gene and meat quality in pigs. A total number of 212 three-way cross bred (Landrace-$Yorkshire{\times}Duroc$) and 38 Duroc were sampled from the Korean pig industry to determine genotype frequency of porcine stress syndrome (PSS) and heat shock protein 70 kDa (HSP70) genes and their relationship with carcass traits and longissimus meat quality. Screen of HSP70 was performed by the single strand conformation polymorphism (SSCP) technique. Based on the analysis of restriction fragment length polymorphism (RFLP) in ryanodine receptor 1 (RYR1) gene, genetic disorder of PSS was related to a mutation at $18,168^{th}$ (C to T) of exon 17. There was no significant difference in ultimate meat pH and backfat thickness between HSP70 K1-AA type and -BB type in pure Duroc breed. In Landrace-$Yorkshire{\times}Duroc$ (L-$Y{\times}D$) cross bred pig, our results indicated that HSP70 derivate type in Duroc had a limited effect on backfat thickness, but L-$Y{\times}D$ type had a noticeable linkage with HSP70 K1-AA and K3-AB. This tendency was also observed in hot carcass weight where HSP70 K1-AA and K3-AB resulted in heavier weight with 86.3 kg compared to HSP70 K1-AB and K3-BB of 74.3 kg. Results imply that stress related HSP70 genotype has a potential association with backfat thickness and carcass weight.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.6
• /
• pp.652-660
• /
• 1992

0.10Pb(SbS11/2TSnS11/2T)OS13T-0.25PbTiOS13T-0.65PbZrOS13T ceramics modified by LaS12TOS13T(1[mol%]) and MnOS12T(0-0.30[mol%]) were fabricated. The structural and pyroelectric properties with contents of MnOS12T were studied. Crystal structure of a specimen was rhombohedral type and average grain sizes were decreased with increasing the contents of MnOS12T. Relative dielectric constant and dielectric loss factor were minimum in the specimens doped 0.24[mol%]MnOS12T. (PbS10.99TLaS10.01T)[(SbS11/2TSnS11/2T) TiS10.25TZrS10.65T]OS13T specimen modified 0.24[mol%]MnOS12T showed the good pyroelectric properties and pyroelectric coefficient and voltage responsivity were 6.73x10S0-8T[C/cmS02TK], 125[V/W], respectively. Voltage responsivity was increased with decreasing the chopper frequency.

• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.119-123
• /
• 2015

This paper presents the inkjet-printed flexible temperature and humidity sensor(F-TH sensor) using PEDOT:PSS. The series, mesh and parallel type sensing element using PEDOT:PSS ink was printed on the overhead projector(OHP) film. The fabricated sensor of each structure has the temperature sensitivity of $140{\Omega}/^{\circ}C$, $29{\Omega}/^{\circ}C$ and $1.4{\Omega}/^{\circ}C$ with linearity, respectively. Also the fabricated sensor was not only possible to measure a temperature, but also to detect humidity. The humidity sensitivity of $400{\Omega}/%RH$, $3.4{\Omega}/%RH$ and $3{\Omega}/%RH$ with linearity, respectively. The fabricated F-TH sensor is expected for the various applications such as electronic devices, bio-healthcare, industrial field.

• Journal of the Ergonomics Society of Korea
• /
• v.14 no.1
• /
• pp.37-57
• /
• 1995

The purpose of this study was to investigate the elastic effect of deformation and restriction in wearing a support type panty stocking (PS). The study investigated deformation rate in all surface area, deformation rate in local area, length deformation rate, changes in slip and feeling of restriction under the standard laboratory condition. Two healthy adult females in twenties wore four types of PS. The result were as follows : The deformation rate in all surface area was 117 .approx. 132% in wearing support type PS, 157% in wearing mono type PS, due to the intensities of restriction. The deformation rate in local area was in order, course > oblique > wale direction. The largest deformation rate was observed in hip girth. Between the deformation rates in all surface and local areas was a high correlation acknowledged, especially the course direction showed a high correlation. Support type PSs showed more deformation and changes of slip than wool and mono type PS. Especially, changes of slip at the knee appeared greatly. The responses of restriction evaluated from a paired comparison method were in order, JS 2 > KS 4 > KS 9 > KS 5 > KS 1 > KM 3.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.113-122
• /
• 2010

In this paper, we propose a CP (Cyclic Prefix) detection based SSS (Secondary Synchronization Signal) detection method for initial cell search in 3GPP LTE (3rd Generation Partnership Project Long Term Evolution) FDD/TDD (Frequency Division Duplex/Time Division Duplex) dual mode downlink receiver. In general, a blind coherent SSS detection method which can detect SSS without CP detection is applied. However, coherent detection method caused performance degradation by channel compensation error at high speed environment because it uses estimated CFR (Channel Frequency Response) at PSS (Primary Synchronization Signal), and it can be more serious problem in TDD mode due to increased distance between PSS and SSS. Also blind detectionhas the drawback of high computational complexity. Therefore, we proposed a CP type pre-decision structure with non-coherent SSS detection which has stable operation in high speed channel environments for 3GPP LTE TDD mode as well as FDD mode, and can reduce computational complexity by applying CP detection before SSS detection. Simulation results show that the proposed method has stable operation for 3GPP LTE TDD/FDD dual mode downlink receiver in various channel environments.