• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.26-28
• /
• 2000

국내 원전 소외 전력 계통과 실계통 대상과도 안정도 해석은 대형 해석프로그램인 PSS/E 등에 의존하여 해석해왔으나, 규제 관점에서 보수적인 과도 안정도를 해석할 수 있는 간이 프로그램을 개발하여, 규제 요건 적합성 여부를 확인할 수 있게 하였다. 본 프로그램은 원전 전력계통에 적용되는 품질요건을 적용하지 않는 제어기에 대하여 신뢰를 두지 않았으며, 송전망 보호 계통-보호계전기 및 차단기-에 의존하여 3상 평형 단락 고장 조건 과도 안정도를 해석한 결과, 과도적인 안정도 판별에 적합함을 확인하였다. 가혹한 송전망 조건 아래 원전 발전기의 고장제거 지연시간에 대한 민감도 분석을 통하여 취약한 원전 부지 및 원전 발전기를 확인할 수 있다.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1042-1045
• /
• 1999

This paper presents a new method for contingency selection of the transient stability. Contingency ranking in transient stability is done by estimating the change in the imaginary part of electro-mechanical oscillation mode, which represents modal synchronizing coefficient. And the change in the imaginary part is obtained by applying eigen-sensitivity theory of augmented matrix to linear system model. The Proposed algorithm was tested for New England System and compared the results with PSS/E dynamic simulation.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1296-1298
• /
• 1999

This paper describes a power flow method for the unified power flow controller(UPFC) considering equipment sizes and constraints. The operation of UPFC subject to the practical constraints encounted in an actual high power installation. So the Power flow method for FACTS must be considered its constraints for power system analysis. The proposed UPFC power flow method was implemented by PSS/E and IPLAN.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.23-28
• /
• 2015

Two old synchronous condensers in Jeju are being replaced by new machines to operate Jeju AC network with Haenam-Jeju HVDC system stably. Before new synchronous condensers operate on site, voltage stability analysis is conducted to verify stable operation of jeju AC network. Through impedance analysis of the synchronous machine, transformer and ac network, the equivalent circuit is constructed and the voltage drop during start-up is calculated. Then, PSS/E fault analysis is performed to acquire short-circuit capacity according to the generator operation scenarios. Voltage variation when starting synchronous condenser is simulated in PSCAD/EMTDC and satisfies the operating condition of jeju AC network and HVDC #1 system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.2
• /
• pp.180-202
• /
• 2012

The purpose of this study was to extract an u-PBL support system core value and design strategy based upon field experience learning. To accomplish this the study, first of all, analyzed the core values, design strategy which was selected after needs analysis and literature review of theories and cases regarding the PBL, e-PBL, blended-PBL, Field experience learning based on ubiquitous environment, and learning model based on ubiquitous technology. This study identified the three core values as; systemic support for instructional activity, just in time support for instructional activity and support for interaction facilitation. As further research areas, it might be useful to develop u-PBL instructional support system based upon the model designed from this study. Also, research concerning the verification of the model based upon implementation of the program case might be necessary.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.355-360
• /
• 2012

It is difficult to converge power flow for the power system planning data. The main cause of power flow diverse is reactive power imbalance. A active power could be adjust by ELD or merit order but a reactive power couldn't dispatch before power flow analysis. The lack of reactive power of power system is cause a inadequate voltage drop This paper suggest new reactive power dispatch algorithm using switched shunt admittance. This algorithm uses reactive power sensitivity called switch shunt jacobian. When proposed algorithm applies to real system data that couldn't be conversed in PSS/E the power flow analysis is converged.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1377-1382
• /
• 2015

Power system restoration following a massive blackout starts with re-energizing Primary Restorative Transmission (PRT) systems at first. As power systems have been gradually enlarged and become more complex, periodical evaluation and reassignment of PRTs are needed. So far it has been decided by try and error approach by corresponding human experts to analyze and evaluate them. This paper presents an intelligent system that finds optimal primary restoration paths using analytic and heuristic knowledge from PSS/E data, and suggests an optimal PRTs depending on the condition of Ferranti effect or a reactive power capability margin of black-start generator. This system was tested in Korea Electric Power system, and showed a promising result.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.282-283
• /
• 2008

This paper presents a overall study results for the Korea power system at yearly peak load time in 2008 summer period. The power system become more complex due to the gradual increase of power demand. We analyze the problems in power system operation, by the use of PSS/E(power flow, fault and transient stability study) and VSAT for voltage stability. The results of establishment of power system operating plan and countermeasure are described.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.3-4
• /
• 2008

${\square}{\square}$ 발전기가 운전 중 계자차단기의 Trip으로 인해 계자가 상실되었으며 이의 파급에 의해 계자상실보호계전기의 작동으로 발전기가 정지하였다. 고장분석을 위해 현장에 설치된 계통현상분석장치에서 기록한 실측자료와 계통해석프로그램인 PSS/E의 계자상실 모의결과를 비교 분석하였으며, 이를 토대로 계자상실보호계전기 정정기준의 적정성을 검토하였다. 또한 계자시스템 관련 보호계전기기간 시간협조 미흡으로 불필요하게 발전기 정지를 유발하여 계통 불안정 상태를 더욱 악화시킬 수 있기 때문에 종합적인 시간협조의 적정성 검토 필요성을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1166-1167
• /
• 2008

풍력 발전기의 계통 연계 기준에서 Fault Ride Through 규정은 사고 시 계통의 응동 특성을 결정하기 때문에 해당 계통의 특징을 반영하여 결정되어야 한다. 이에 여기에서는 세계 각국의 풍력발전기에 적용되는 Grid code에 대해 분석하고, 이를 바탕으로 FRT 규정의 수립에 필요한 기술적 요건에 대해 검토한 후, 해당 규정 수립을 위한 방법론을 제시한다. 이때, 구체적인 parameter 설정은 제주계통을 대상으로 PSS/E를 이용한 안정도 모의 결과에 따라 사고 시 계통의 전압 특성을 반영할 수 있도록 하였다.