• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.281-281
• /
• 2010

Very low refractive index (<1.4) materials have been proved to be the key factor improving the performance of various optical components, such as reflectors, filters, photonic crystals, LEDs, and solar cell. Highly porous SiO2 are logically designed for ultralow refractive index materials because of the direct relation between porosity and index of refraction. Among them, ordered macroporous SiO2 is of potential material since their theoretically low refractive index ~1.10. However, in the conventional synthesis of ordered macroporous SiO2, the time required for the crystallization of organic nanoparticles, such as polystyrene (PS), from colloidal solution into well ordered template is typical long (several days for 1 cm substrate) due to the low interaction between particles and particle - substrate. In this study, polystyrene - polyacrylic acid (PS-AA) nanoparticles synthesized by miniemulsion polymerization method have hydrophilic polyacrylic acid tails on the surface of particles which increase the interaction between particle and with substrate giving rise to the formation of PS-AA film by simply spin - coating method. Less ordered with controlled thickness films of PS-AA on silicon wafer were successfully fabricated by changing the spinning speed or concentration of colloidal solution, as confirmed by FE-SEM. Based on these template films, a series of macroporous SiO2 films whose thicknesses varied from 300nm to ~1000nm were fabricated either by conventional sol - gel infiltration or gas phase deposition followed by thermal removal of organic template. Formations of SiO2 films consist of interconnected air balls with size ~100 nm were confirmed by FE-SEM and TEM. These highly porous SiO2 show very low refractive indices (<1.18) over a wide range of wavelength (from 200 to 1000nm) as shown by SE measurement. Refraction indices of SiO2 films at 633nm reported here are of ~1.10 which, to our best knowledge, are among the lowest values having been announced.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.83-84
• /
• 2014

This study evaluated the effectiveness of biostimulating agent in contaminated coastal sediment. The study was conducted via column tests in coastal sea wherein two separate columns were employed for two different polymers used and another column for a blank. The biostimulating agent was made by mixing sea sediment with biostimulants viz acetate, nitrate, sulfate. The biostimulating agent was then rolled into balls, dried and coated with either Cellulose Acetate (CA) or Polysulfone (PS) to control the release of the biostimulants. The pH was around 7.6~8 for 4 months while COD, TP and TN were significantly lower in the column containing biostimulating agents. Heavy metal(Fe, Zn, Cd, Cr, Pb, Cu) was converted to stable forms and PS coated biostimulating agent had a high efficiency of heavy metals distribution.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.2
• /
• pp.194-218
• /
• 2008

The public-private partnership concept can encompass a broad range of cooperative relations and a broad variety of programmes in terns of size, objectives and design. This paper aims to analyze the components of public-private partnership mechanisms in the context of science and technology innovation policy. The research methodologies are based on semi-structured interviews with policy makers in four countries with six PPP programme : the France, the Netherlands, the Australia and Austria. It also attempts to understanding of the components that explain the increase of collaboration between national innovation system and PPPs. The taxonomy and essential components of PPPs were identified : mission-oriented PP/Ps, market-Oriented PP/Ps, cluster-oriented PP/Ps, and ISRs-Oriented PP/Ps. The taxonomy of regulatory regime can be a reference point for identifying the relative status of Korea's PPPs.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.72-79
• /
• 2013

Inactivation of the gene coding for dihydroflavonol 4-reductase (DFR) is responsible for the color difference between red and yellow onions (Allium cepa L.). Two inactive DFR-A alleles, DFR-$A^{PS}$ and DFR-$A^{DEL}$, were identified in our previous study. A functional marker was developed on the basis of the premature stop codon that inactivated the DFR-$A^{PS}$ allele. A derived cleaved amplified polymorphic sequences (dCAPS) primer was designed to detect the single nucleotide polymorphism, an A/T transition, which produced the premature stop codon. Digested PCR products clearly distinguished the homozygous and heterozygous red $F_2$ individuals. Meanwhile, to develop a molecular marker for detection of the DFR-$A^{DEL}$ allele in which entire DFR-A gene was deleted, genome walking was performed and approximately 3 kb 5' and 3' flanking sequences of the DFR-$A^R$ coding region were obtained. PCR amplification using multiple primers binding to the extended flanking regions showed that more of the extended region of the DFR-A gene was deleted in the DFR-$A^{DEL}$ allele. A dominant simple PCR marker was developed to identify the DFR-$A^{DEL}$ allele using the dissimilar 3' flanking sequences of the DFR-A gene and homologous DFR-B pseudogene. Distribution of the DFR-$A^{PS}$ and DFR-$A^{DEL}$ alleles in yellow onion cultivars bred in Korea and Japan was surveyed using molecular makers developed in this study. Results showed predominant existence of the DFR-$A^{PS}$ allele in yellow onion cultivars.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.734-739
• /
• 2018

We successfully coated poly(3,4-ethylenedioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS) on CVD graphene by adding poly(vinyl alcohol) (PVA) to PEDOT : PSS. Extensive studies on the wettability of coating solutions and electrical properties of formed films led us to conclude that PVA with 89% of the degree of saponification and the molecular weight of less than $100,000gmol^{-1}$ produced optimum results. Furthermore, the optimum content of PVA was found to be 5% of PEDOT : PSS by the solid weight. The film coated by PEDOT : PSS with PVA on CVD graphene displayed a conspicuous improvement in the surface roughness, adhesive property, bending durability and stability in resistance at $160^{\circ}C$, compared to those of using CVD graphene films.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.4
• /
• pp.363-371
• /
• 1994

Background: DNA content analysis of human solid tumor is now widely performed by flow cytometric study. One of the most interesting and potentially important observation in this field is that proliferative activity(S-Phase fraction of cell cycle) may profoundly affect the prognosis. Method: S-Phase fraction(SPF) have been measured by flow cytometric method using tumor cells isolated from paraffin embedded tissue. To evaluate the prognostic significance, SPF of small lung cancer cell was assessed in 42 patients who died after receiving anticancer chemotherapy. Results: 1) Mean survival time of patients with small cell lung cancer was 190(${\pm}156$) days. Survival time were shortened, when TNM stage and PS scale were advanced. 2) Mean value of SPF of patients with small cell lung cancer was 27.4(${\pm}8.5$)%. SPF had nothing to do with advance of TNM stage and PS scale. 3) In each identical TNM stage, there were not statistic significance between SPF and survival times. 4) There was a tendency like that higher SPF, better chemotherapeutic response. Conclusion: We could not find statistic significance between SPF and survival times, but SPF was a good predictive factor for chemotherapeutic response.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.2
• /
• pp.72-77
• /
• 2009

In this paper, a 3.2Gb/s clock and data recovery (CDR) circuit for a high-speed serial data communication without the reference clock is described This CDR circuit consists of 5 parts as Phase and frequency detector(PD and FD), multi-phase Voltage Controlled-Oscillator(VCO), Charge-pumps (CP) and external Loop-Filter(KF). It is adapted the PD and FD, which incorporates a half-rate bang-bang type oversampling PD and a half-rate FD that can improve pull-in range. The VCO consists of four fully differential delay cells with rail-to-rail current bias scheme that can increase the tuning range and tuning linearity. Each delay cell has output buffers as a full-swing generator and a duty-cycle mismatch compensation. This materialized CDR can achieve wide pull-in range without an extra reference clock and it can be also reduced chip area and power consumption effectively because there is no additional Phase Locked- Loop(PLL) for generating reference clock. The CDR circuit was designed for fabrication using 0.18um 1P6M CMOS process and total chip area excepted LF is $1{\times}1mm^2$. The pk-pk jitter of recovered clock is 26ps at 3.2Gb/s input data rate and total power consumes 63mW from 1.8V supply voltage according to simulation results. According to test result, the pk-pk jitter of recovered clock is 55ps at the same input data-rate and the reliable range of input data-rate is about from 2.4Gb/s to 3.4Gb/s.

• Journal of Distribution Research
• /
• v.7 no.1
• /
• pp.105-127
• /
• 2002

This paper presents an analysis of how the business models of organizations are getting transformed in the Marketspace created by the Internet. We use a research model comprising the transformation scores of four Ps(Product, Price, Promotion, and Place) as dependent variables and three dimensions, Demographics, Technology, and Community elements on the Websites, as explaining variables about the Cyber Transformation of the 4Ps. While most existing literatures have focused on Website's technology, our research model includes 22 five-point-scale items; 10 Demographics /Technology items and 12 Community items. To measure the 4P's transformation scores, the authors selected 14 workable items from the Marketspace Model by Dutta, Kwan, & Segev(1997). A sample of 123 shopping mall Websites comprising three categories(grocery, jewelry/accessory, and cosmetics) from the 100hot.co.kr list are evaluated and the data is analyzed by SPSSWIN 8.0 version. The result shows that there are five significant factors, Technology, Interaction, Connectedness, Business Features, and Domain, while the average transformation scores of 4Ps are at very low level. The factor scores are used in regression analysis for each P. Two factors, Technology and Interaction are influencing all four Ps; Connectedness is influencing only two, Product and Place. Organizations must not simply take their existing business models. They have to adopt the Technology items(navigation, logo, e-mail, guide, graphics) and to facilitate the Interaction items(consulting, number/quality of bulletin boards, participation, offline events) and Connectedness(club activation, contents, partner/site link, entertainment contents) in order to get transformed in the Marketspace successfully in the near future.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.200-200
• /
• 1996

간재생 및 만성 간질환모델에 대한 인진호 추출분획의 간장 약효검색 방법 1. 간세포 재생능력에 대한 효과 : SD계 수컷 흰쥐(체중 300-350g)를 마취하에서 복부정중선을 따라 개복후 간의 중앙엽 및 좌측엽을 절제하여 봉합하고 수술조작을 끝낸 추 4시간, 익일부터 7일간 오후 5시에 약물을 경구투여하고 마지막투여 후 20시간 절식, 부검하여 간재생률 및 BSP 정체율을 측정하였다. 2. $CCl_4$ 만성간장해 모델에 대한 효자 SD계 수컷 흰쥐(체중 200-250g)에 $CCl_4$ : olive oil 40%용액을 0.5 $m\ell$/kg b.wt. 용량으로 6일간 결구투여 한 후 7일째부터 매일 시험약물을 $CCl_4$ 혼합액 투여 4시간전 및 4시간후에 2회 경구투여하였으며 이 조작을 8일간 하고 마지막 투여 24시간 후에 부검하여 혈액내 ALT 및 AST치, 간조직내 total protein, triglyceride 및 hydroxyproline 양을 측정하였으며, 간중량도 측정하였다. 3. 약물투여 음성대조 : 1% CMC-Na 용액(10$m\ell$/kg b.wt.) 양성대조 : silymarin(25mg/kg), DDB(37.5mg/kg) 인진호추출분획 : KP(180mg/kg), PS-1(300mg/kg), PS-2(300mg/kg), EE (500mg/kg ), HH(640mg/kg), BE(1500mg/kg)

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.264-269
• /
• 2006

A $0.12GHz{\sim}1.4GHz$ DLL-based clock generator with the capability of multiplied four phase clock generation was designed using a 0.18um CMOS process. An adaptive bandwidth DLL with a regulated supply delay line was used for a multiphase clock generation and a low jitter. An extra phase detector (PD) in a reference DLL solves the problem of the initial VCDL delay and achieves a fast lock time. Twice multiplied four phase clocks were generated at the outputs of four edge combiners, where the timing alignment was achieved using a coarse lock signal and the 10 multiphase clocks with T/8 time difference. Those four clocks were combined one more time using a static XOR circuit. Therefore the four times multiplication was achieved. With a 1.8V supply, the rms jitter of 2.1ps and the peak-to-peak jitter of 14.4ps were measured at 1.25GHz output. The operating range is $0.12GHz{\sim}1.4GHz$. It consumes 57mW and occupies 450*325um2 of die area.