• 제목/요약/키워드: PS steel wire tension

검색결과 3건 처리시간 0.016초

지점부 상부슬래브에 PS강선 긴장된 강 박스거더교의 구조적 특성 분석 (Structural Characteristics Analysis of Steel Box Girder Bridge being stressed the PS Steel Wires at the Upper Slab of the Intermediate Support)

  • 차태권;장일영
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권2호
    • /
    • pp.1-7
    • /
    • 2021
  • 강 박스거더 교량의 연속지점부 바닥판은 상부플랜지와 합성되는 구조이며 장경간 교량에서는 지점부 바닥판에 인장균열이 발생할 수 있는 구조로서 내구성 저하 등의 문제가 발생하고 있다. 이는 장경간 적용시 고정하중 및 활하중의 영향으로 슬래브의 교축방향 인장응력이 설계인장강도를 초과하기 때문이다. 이에 지점부 슬래브에 교축방향 철근을 추가하여 인장균열을 제어하고 추가의 압축응력 도입이 필요하다. 이러한 문제점 해결을 위해 연속지점부 상부슬래브의 인장응력 구간에 PS강선 긴장으로 압축응력을 도입하는 강 박스거더교의 구조계를 제안하였고, 이에 따른 구조적 성능을 유한요소해석과 실물시험체의 강선긴장 실험을 통해서 비교 검증하였다. PS강선 긴장을 통해 부모멘트부에 발생하는 슬래브의 인장응력 및 균열을 제어할 수 있는 압축응력을 도입하면 기존 강 박스거더교에 비해 구조안전성 개선 및 내구성능을 강화할 수 있다.

긴장재의 응력 및 온도변화에 따른 자속투과율 (Permeability of Magnetic Flux of PS Steel for Variation of Stress and Temperature)

  • 박진수;김병화
    • 대한토목학회논문집
    • /
    • 제42권3호
    • /
    • pp.323-331
    • /
    • 2022
  • PS 긴장재의 긴장률, 온도 그리고 자속투과율의 상호관계가 실험적으로 조사되었다. 자속투과율은 두 지점 사이의 자속이 통과하는 비율이다. 실험에 사용된 긴장재는 케이블 교량에 주로 사용되는 ϕ7 mm 고강도 강선과 PSC 긴장재로 사용되는 ϕ12.7 mm 강연선이다. 다양한 도입 긴장률과 온도 조건하에서 강선과 강연선의 자속투과율 실험이 수행되었다. 실험결과로부터, PS 긴장재의 자속투과율은 도입 긴장률에 선형 비례하고, 온도에 선형 반비례함을 알 수 있다. PS 긴장재의 자속투과율-온도-긴장률 사의의 실험적 관계를 미리 알게 되면, 현장에서 PS 강재의 자속투과율과 온도만을 계측함으로써, PS 긴장재의 현재 긴장응력 수준을 변형률 계측 없이 직접 평가할 수 있다.

재료 물성 최적화를 통한 PS 강연선의 형상 단순화에 관한 해석적 연구 (An Analytical Study on the Simplification of the Shape of PS Tendon Through the Optimization of Material Properties)

  • 김도연;장일영
    • 한국산업융합학회 논문집
    • /
    • 제27권3호
    • /
    • pp.555-561
    • /
    • 2024
  • This paper derives material properties of steel bars that simulate the distribution of stress and strain of prestressed tendons used in Prestressed concrete(PSC) girders and presents an optimal material model. ABAQUS software was used to establish the 3D solid model of the PSC girder and strand wire rope for a PS(Prestressed) tendon. Then the model of steel wire rope was imported into the Isight interface plugin directly through the ABAQUS and the Data Matching. In ABAQUS, the contact pairs were established, the models were meshed, the constraints were applied to solve the finite element model and an axial tension of 0.5m/s was loaded to analyze the stress and deformation distributions in the normal working range of the PS strand wire rope. In Data Matching, classical experimental data is fitted to the optimal material properties through finite element analysis and multi-objective optimization. The results show that the steel bar with optimal material properties presents a similar linear area and stress distribution with the PS tendon.