• 한국재난정보학회 논문집
• /
• 제15권1호
• /
• pp.1-11
• /
• 2019

연구목적 : 본 연구는 경상남북도의 국가지정 중요목조문화재 주변 환경에 따라 방재특성이 어떻게 다른지를 파악하고 이를 바탕으로 문화재 주변 환경에 맞는 목조문화재 방재대책을 검토하고자 한다. 연구방법 : 연구를 위해 경상남도와 경상북도에 있는 문화재 지정 현황 및 특성을 파악하고 재난이력을 통하여 경상남도 및 경상북도에 있는 문화재의 피해 현황을 검토하였다. 또한 경상남도와 경상북도에 있는 국가지정 중요목조문화재 58개소를 대상으로 주변 환경에 따라 산악, 농촌, 도시지역으로 나누어 방재특성을 분석하였다. 연구결과 : 도시지역에 위치한 문화재는 안전경비인력의 배치가 적절했고 방재훈련이 잘 이루어지고 있었으며 진입여건은 신속하게 진입할 수 있었다. 농촌지역은 방염사업이 잘 실시되어 있었고 평탄한 곳에 위치한 문화재가 많았다. 산악지역은 진입여건이 타 지역에 좋지 않았으며 과거 재난 발생이력도 가장 많았다. 결론 :첫째, 도시지역의 목조문화재 경우 초기 대응을 위한 자위소방대 배치인력 확보 및 방재교육을 강화해야 한다. 둘째, 농촌지역의 목조문화재 경우 문화재 보호를 위한 방충사업, 방재보험 등의 예방사업을 실시해야 한다. 셋째, 산악지역의 목조문화재 경우 자체적인 대응역량을 강화하기 위한 방안을 마련해야 한다.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.853-863
• /
• 1999

the change of physical properties (thickness, weight, air permeability) and mechanical properties(abrasion resistance breaking load and displacement) of samples were determined after heat exposure by a RPP tester. The effect of exposure time and heat flux intensity on the changes and the relationship between physical properties and mechanical properties were investigated. FR treated cotton Kevlar/PBI and Nomex with different structureal characteristics were chosen for specimens. The changes of physical properties and mechanical properties were calculated based on their initial values before heat exposure. The longer exposure time and the high heat flux intensity the more changes of those properties. Heat flux intensity was more effective on the changes, The showed to be affected by an interplay of shrinkage and pyrolysis products loss. The changes of thickness and abrasion resistance showed to be higher for plain weave fabric and those of air permeabiliyt and breaking load and displacement for twill weave fabric. While FR treated cotton which have high RPP value experienced serious and detrimental changes after heat exposure Kevlar/PBI which has low RPP value showed no high changes. In conclusion it could be confirmed that when total performance of a protective clothing is estimated retention capability of physical and mechanical properties after heat exposure as well as RPP value must be considered.

• 보존과학연구
• /
• 통권25호
• /
• pp.93-117
• /
• 2004

The stone cultural properties durability is the falling. So the conservation is easy relatively. But the conservation countermeasure of the stone cultural properties the environment pollution needed urgently as extreme. I will find out about the stone cultural properties Through the example of Restoration and conservation treatment about Bowonsabeobin-guksaboseungtap in the paper. Damage reasons of the stone cultural properties are a physical damage, a structural damage, a biology damage, a chemical damage and artificial damage. The moisture plays especially the role which damage is make the stone cultural properties. The stone cultural properties is damaged due to damage reasons. So we investigate the stone cultural properties and must remove damage reasons. Bowonsabeobin-guksaboseungtap is funerary stupa of buddhist monk with circleorientedoctagon in Geryeo Period. There is the open air. Parts of it were damaged by grave robbery in 2004. So restoration was begun in 2004.While restoring it, wrong arrangement on top of the monk-stupa was rearranged. After being arranged in right order, the middle of monk-stupa was fixed by setting up stainlesssteel shaft. A roof stone of stupa finial has cracks. So It was adhered with epoxy resin(L-30) and was washed with distilled water for pollution clearing. The stone cultural properties takes the influence of the environment pollution much because it stays at the fields. It is easy also to be robed. Therefore we must watch more with the concern.

• Structural Engineering and Mechanics
• /
• 제35권1호
• /
• pp.53-65
• /
• 2010

The rigid body inertia properties of a structure including the mass, the center of gravity location, the mass moments and principal axes of inertia are required for structural dynamic analysis, modeling of mechanical systems, design of mechanisms and optimization. The analytical approaches such as solid or finite element modeling can not be used efficiently for estimating the rigid body inertia properties of complex structures. Several experimental approaches have been developed to determine the rigid body inertia properties of a structure via Frequency Response Functions (FRFs). In the present work two experimental methods are used to estimate the rigid body inertia properties of a frame. The first approach consists of using the amount of mass as input to estimate the other inertia properties of frame. In the second approach, the property of orthogonality of modes is used to derive the inertia properties of a frame. The accuracy of the estimated parameters is evaluated through the comparison of the experimental results with those of the theoretical Solid Work model of frame. Moreover, a thorough discussion about the effect of accuracy of measured FRFs on the estimation of inertia properties is presented.

• Advanced Composite Materials
• /
• 제16권4호
• /
• pp.315-334
• /
• 2007

In the present study, chopped henequen natural fibers without and with surface modification by electron beam (E-beam) treatment were incorporated into a polypropylene matrix. Prior to composite fabrication, a bundle of raw henequen fibers were treated at various E-beam intensities from 10 kGy to 500 kGy. The effect of E-beam intensity on the interfacial, mechanical and thermal properties of randomly oriented henequen/polypropylene composites with the fiber contents of 40 vol% was investigated focusing on the interfacial shear strength, flexural and tensile properties, dynamic mechanical properties, thermal stability, and fracture behavior. Each characteristic of the material strongly depended on the E-beam intensity irradiated, showing an increasing or decreasing effect. The present study demonstrates that henequen fiber surfaces can be modified successfully with an appropriate dosage of electron beam and use of a low E-beam intensity of 10 kGy results in the improvement of the interfacial properties, flexural properties, tensile properties, dynamic mechanical properties and thermal stability of henequen/polypropylene composites.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.39-47
• /
• 2000

This study was carried out to investigate the effect of the type of base papers containing Sw-BDP, HW-BDP and Bamboo-BKP on the properties and printabilities of coated papers. Also it was intended to evaluate the effect of coated paper prepared with anionic and amphoteric latex based coating color. The results obtained from this study were as follows. The fiber length of Bamboo-BKP was observed longer than that of the Hw-BKP and shorter than that of the Sw-BKP. This has effect on physical properties. Therfore the results of mea-suring physical properties were higher ratio of Sw-BKP physical properties tended to be slightly higher with the increase I the mixing ratio. Considering the optical properties of base papers the highest opacity was obtained in case of the Hw-BKP and the second appeared Bamboo-BKP. On the other hand smoothness roughness and air permeability of Bamboo-BKP were lower than those of wood pulp and the optical properties of coated papers tended to show the similar with those of base papers. The ink receptivity and print gloss of the coated papers for Bamboo-BKP were lower than those of wood pulp. As the mixing ratio of Sw-BKP was increased the properties and printabilities were improved slightly. Meanwhile amphoteric latex was improved the optical properties and printability of coated papers.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.411-417
• /
• 2008

The surfaces of henequen fibers, which can be obtained from the leaves of agave plants, were treated with two different media, tap water and sodium hydroxide, that underwent both soaking and ultrasonic methods for the fiber surface treatment. Various biocomposites were fabricated with untreated and treated, chopped henequen fibers and polypropylene using a compression molding method. The result is discussed in terms of interfacial shear strength, flexural properties, dynamic mechanical properties, and fracture surface observations of the biocomposites. The soaking (static method) and ultrasonic (dynamic method) treatments with tap water and sodium hydroxide at different concentrations and treatment times significantly influenced the interfacial, flexural and dynamic mechanical properties of henequen/polypropylene biocomposites. The alkali treatment was more effective than the water treatment in improving the interfacial and mechanical properties of randomly oriented, chopped henequen/PP bio-composites. In addition, the application of the ultrasonic method to each treatment was relatively more effective in increasing the properties than the soaking method, depending on the treatment medium and condition. The greatest improvement in the properties studied was achieved by ultrasonic alkalization of natural fibers, which was in agreement with the other results of interfacial shear strength, flexural strength and modulus, storage modulus, and fracture surfaces.

• Advances in concrete construction
• /
• 제3권4호
• /
• pp.317-331
• /
• 2015

This paper presents the effect of different micro-silica (MS) contents of 5, 10 and 15 wt.% as partial replacement of cement on mechanical and durability properties of high volume fly ash - recycled aggregate concretes (HVFA-RAC) containing 50% class F fly ash (FA) and 35% recycled coarse aggregate (RCA) as partial replacement of cement and natural coarse aggregate (NCA), respectively. The measured mechanical and durability properties are compressive strength, indirect tensile strength, elastic modulus, drying shrinkage, water sorptivity and chloride permeability. The effects of different curing ages of 7, 28, 56 and 91 days on above properties are also considered in this study. The results show that the addition of MS up to 10% improved the early age (7 days) strength properties of HVFA-RAC, however, at later ages (e.g. 28-91 days) the above mechanical properties are improved for all MS contents. The 5% MS exhibited the best performance among all MS contents for all mechanical properties of HVFA-RAC. In the case of measured durability properties, mix results are obtained, where 10% and 5% MS exhibited the lowest sorptivity and drying shrinkage, respectively at all ages. However, in the case of chloride ion permeability a decreasing trend is observed with increase in MS contents and curing ages. Strong correlations of indirect tensile strength and modulus of elasticity with square root of compressive strength are also observed in HVFA-RAC. Nevertheless, it is established in this study that MS contributes to the sustainability of HVFA-RAC significantly by improving the mechanical and durability properties of concrete containing 50%less cement and 35% less natural coarse aggregates.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.79-86
• /
• 2004

지반과 숏크리트 사이의 인터페이스 특성은 지반하중이 숏크리트 라이닝에 전달되는 과정에서 중요한 역할을 한다. 또한 인터페이스 특성은 지반 및 숏크리트 라이닝의 거동에 상당한 영향을 미친다. 그러나 대부분의 수치 해석적 연구에서는 이러한 인터페이스 특성을 단순히 가정하여 적용해 왔으며 이를 규명하기 위한 시도도 거의 이루어지지 않았다. 따라서 본 연구에서는 터널 측벽에서 회수된 숏크리트/암석 코어에 대해 직접전단시험과 인터페이스 수직압축시험을 실시하여 점착력, 인장강도, 마찰각, 전단강성 및 수직강성과 같은 인터페이스 특성을 규명하고자 하였다. 인터페이스 특성의 시간 의존적인 변화양상과 비교하기 위하여 압축강도와 탄성계수와 같은 숏크리트의 역학적 물성도 측정하였다. 실험결과로부터, 지반과 숏크리트 라이닝 사이의 인터페이스 특성은 역학적 물성과 유사하게 상당한 시간 의존적 거동을 보인다는 것을 확인하였다. 또한 인터페이스 특성의 시간의존적인 거동을 지수함수와 로그함수 형태로 잘 근사 시킬 수 있었다.

• 감성과학
• /
• 제8권4호
• /
• pp.345-354
• /
• 2005

본 연구는 직물구조인자인 위사밀도와 직물의 조직을 변화시켜 시직한 면직물을 이용하여 역학특성 및 태의 변화를 KES-FB System을 이용하여 측정하였다. 그 결과 위사밀도가 증가할수록 굽힘특성 및 전단특성이 증가하는 것으로 나타났고, 위사밀도의 변화에 따른 역학특성치 중 굽힘 및 전단특성의 값은 평직이 높게 나타났으며, 인장특성, 압축특성 그리고 표면특성의 값은 조직 및 밀도에 크게 영향을 받지 않는 것으로 나타났다. 한편, 위사밀도 변화에 따른 의복착용성능 중 WC/T, MMD/SMD를 제외한 B/W 및 2HG/G, 2HB/B, 2HB/W, W/T, 그리고 WC/W는 위사밀도에 영향을 받는 것으로 나타났다. 위사방향의 직축은 굽힘특성, 전단특성, 압축회복도(RC), 표면거칠기(SMD), 태와 의복착용성능에 높은 상관을 보이는 것으로 나타났다. 그리고 Tightness는 굽힘특성, 전단특성, 압축특성 그리고 표면 마찰계수와 높은 상관을 보였고, 기본태 및 T.H.V., 의복착용성능에도 높은 상관이 있는 것으로 나타났다.