• Journal of Veterinary Clinics
• /
• v.29 no.6
• /
• pp.488-493
• /
• 2012

Two Maltese (2-year-old, intact female and 4-month-old, intact female) and a Pekingese (10-year-old, intact male) dogs were referred due to vomiting, anorexia, head-pressing and hypersalivation. Physical examinations, complete blood count, serum chemical analysis, radiography, ultrasonography and computed tomography (CT) were evaluated. Laboratory findings in these dogs included high hepatic enzyme, serum bile acid and ammonia concentration. Microhepatia was found on abdominal radiographs in two dogs. The existence of portosystemic shunt was presented in abdominal ultrasonography. The shunt vessel was identified in all dogs by CT imaging. Based on three-dimensional CT reconstruction, the origin and termination of each shunt vessel were defined certainly. In consequence, each dog was diagnosed single extrahepatic portosystemic shunt. After diagnosis, surgical treatment was performed in all dogs. This case report describes clinical finding, imaging characteristics, and three-dimensional CT imaging of single extrahepatic portosystemic shunt cases.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.180-188
• /
• 1982

This study was carried out to make hardboard fire retardants and to examine the properties of the hard-board treated with them. The fire retardant treatment was achieved by surface impregnation of water soluble retardant chemicals into the forming mat with 55 percent of moisture content. followed by the hot pressing process. Ammonium monophosphate, ammonium diphosphate, sodium borate, and boric acid were used as the fire retardants. Fire retardant test was carried out by using the differential thermal analysis thermogram. The results are summarized as follows: 1. Fire retardant-treated hardboard showed higher values of the specific gravity. water absoption, and flexural strength than those of untreated hardboard. Especially, the treatment of ammonium monophosphate gave the best results in the flexural strength, and a 10 gr/$ft^2$ loading of the fire retardant compound of ammonium monophoshate, ammonium diphosphate, and sodium borate drew the best flexural strength value among the three different experimental loadings of 10, 20 and 30 gr/$ft^2$. 2. There were no definite differences in moisture content between the fire retardant-treated hardboard and the untreated hardboard. 3. The fire retardant compound of ammonium monophosphate, ammonium diphosphate, and sodium borate resulted in the best fire retardancy, and its fire retardancy was increased in proportion to the increase of loading.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.56-63
• /
• 1996

This study was to manufacture thinned wood of Larix leptolepis Gordon into Oriented Strand Board(OSB) with Urea-Formaldehyde Resin. The OSB was made of four kinds of strand in slenderness ratio 150 ; thickness $0.3{\pm}0.05mm$, $0.4{\pm}0.05mm$, $0.5{\pm}0.05mm$ and $0.6{\pm}0.05mm$, respectively length 45mm, 60mm, 75mm and 90mm. Target densities were 0.65gr/$cm^3$, 0.75gr/$cm^3$ and 0.85gr/$cm^3$. The stepwise 9 minutes-multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 10kgf/$cm^2$ was applied for $400mm{\times}390mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. In MOR The OSB of thin strand thickness $0.3{\pm}0.05mm$(length 45mm) and density 0.85gr/$cm^3$ was the highest. The strand thickness had more effect on MOR than the strand length. In strand thickness $0.4{\pm}0.05mm$(length 60mm) and density 0.85gr/$cm^3$ was the highest MOE. The strand thickness and length had adverse effects on MOE each other. At internal bonding. The OSB of strand thickness $0.3{\pm}0.05mm$(length 45mm) and board density 0.75gr/$cm^3$ showed the highest value. OSB had higher IB value with thinner strand thickness. The thinner strand thickness showed the lower thickness swelling in turn $0.3{\pm}0.05mm$(length 45mm), $0.4{\pm}0.05mm$(length 60mm), $0.5{\pm}0.05mm$(length 75mm). $0.6{\pm}0.05mm$(length 90mm). Target densities 0.75gr/$cm^3$ 0.65gr/$cm^3$, 0.85gr/$cm^3$ showed in turn lower value. Finally, The OSB made of thinned wood of Larix leptolepis Gordon showed good results in laboratory experiment.

• Journal of Korean Academy of Nursing
• /
• v.23 no.1
• /
• pp.56-67
• /
• 1993

The purpose of this study was to compare the circumference and skinfold thickness of upper and lower limb and the leg strength of the casted limb with those of the normal limb after removal of a leg cast. The subjects for the study were orthopedic patients who had had long and short leg casts or splints due to tibial, fibulal, metatarsal, calcaneus fracture or ankle sprains. The subjects were divided into two groups, those who had the cast on for less than 40 days and those for over 41 days. Circumference and skinfold thickness of the upper and lower limb on the side on which the cast was ap-plied were compared with those of the contralateral side after removal of the cast. Circumference and skinfold thickness of the upper and lower limb, and leg strength for those in a cast for under 40 days were compared with those of over 41 days for both the side to which cast was applied and the contralateral side. Measurements were made after removal of the cast. Skinfold thickness was measured by fat caliper, circumference was measured by tape and lower extremity strength was determined with flat foot pressing on an electronic digital health meter in the sitting position. The results can be summarized as follows : 1. The circumference of the upper and lower leg on the side on which the cast was applied, when measured after the cast was removed, were significantly less than those of the normal side, 93.88%, 93.11% each. 2. Skinfold thickness of the quadriceps and gastrocnemius on the side on which the cast was applied were significantly less than those of the normal side when measured after removal of the cast, 85.98%, 82.85% respectively. 3. Leg strength on the side where the cast was applied was significantly 1ss than that on the normal side, 60.20%. 4. There was no difference in the circumference of upper and lower limbs, skinfold thickness or leg strength on the side where the cast was applied between the group which had the cast applied for under 40 days and the group that had it applied for over 41 days. 5. The circumference of the upper arm and lower leg on the normal side for the group that had the cast applied for over 41 days was significantly greater than the group that had the cast application for under 40 days. T ere was no difference between the two groups in the circumference of the forearm and upper leg, skinfold thickness and leg strength in the normal side. From these results, it may be concluded that muscle atrophy was apparent in the casted limb compared to the normal limb, and the circumference of the upper arm and lower leg, and leg strength on the normal side increased after removal of the cast in the group which had the cast on for more than 41 days.

• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.810-815
• /
• 2008

Improving quality is a very important component of maintaining competitiveness of agricultural products. However, evaluation of 'high quality' indicates it is a very abstract concept and independent of some quality attributes, leading to differences in the perception of quality. Thus, there is a pressing need to objectively define 'high quality' and to develop basic technologies for its measurement, for application in the production, storage and distribution of competitive agricultural products. To objectively quantify apple quality, a survey was conducted on consumer preferences and awareness of quality attributes including color, taste, flavor and shape. The survey questionnaire targeted male and female adults (463 persons) ranging in age from 20 to 59 years. The questionnaire was based on purchases made at a wholesale market (50.1%) or a traditional market (18.8%). The majority of purchases were as small packets (62.0%) or as individual pieces (20.5%). Apples of moderate size (fist size, 60.5%) were preferred over small (4.3%) or large (32.6%) apples. The questionnaire provided consumer data on external quality attributes including color, shape and variety. Taste attributes were evaluated in relation to the balance between sour and sweet taste, and flavors peculiar to apples.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.680-686
• /
• 1996

Investigations were conducted on the effects of different blanching solutions and time on tile quality of carrot juice to minimize undesirable changes in color, taste and flavor of raw carrot. Juice yields were 65.9% in raw juice(RJ), 51.7~55.3% in juice by blanching in water(JBIW) and 44.6% in juice by blanching in acetic acid solution(JBIA). pH of JBIW was 6.12~6.37, similar to RJ, while that of JBIA was 4.85. Soluble solid was in the decreasing order of RJ, JBIW and JBIA. Turbidities of JBIW for 1 min and JBIA for 5 min after 3 day storage at $4^{\circ}C$ were maintained by 94% compared to the original juice. Only 44~46% of $\beta-carotene$ was extracted from carrots during pressing, and f-carotene was extracted to a greater extent than $\alpha-carotene.$ Sensory evaluation indicated that JBIW for 1 min was superior to nth and commercially available juice in overall acceptance.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.777-782
• /
• 2004

In this research, $5\times5cm^2$ unit cells were fabricated via liquid condensation process and uniaxial pressing followed by the screen printing of electrolyte and cathode layer. The SOFC stack was assembled with unit cells, gasket-type sealant and metal interconnect. The stack was designed to have a single column with internal-manifold and cross-flow type gas-channels. The SOFC stack produced 15 W, which is $50\%$ of the maximum power being expected from the maximum power density of the unit cell. Controlling factors for the proper operation of the SOFC stack and other designing factors of stack manifold and gas channels were discussed.

• Strategy21
• /
• s.39
• /
• pp.5-46
• /
• 2016

North Korea's 4th nuclear test on Jan. 6 and following developments once again awakened the world into seriousness of the nuclear matters on the Korean peninsula. On March 2, UNSC adopted Resolution 2270 which is complemented by Seoul government's measures such as withdrawal from the Gaesung Industrial Complex (Feb. 9) and announcement of unilateral sanction (March 8). Seoul government also strongly urged the international community to strangle North Korea's 'financial resources.' The U.S., Japan, China, and other countries have issued unilateral sanctions to complement the UNSC measure. South Korea and the U.S. conducted their annual joint military drill (Resolve-Foal Eagle) in the largest-ever scale. North Korea, however, responded with demonstration of its nuclear capabilities and announcement of de facto 'nuclear-first' politics. North Korea test-fired a variety of delivery vehicles, threatened nuclear strikes against South Korea and the U.S., and declared itself as an 'invincible nuclear power armed with hydrogen bombs' at the 7th Workers 'Party Congress held in May, 2016. Considering the circumstantial evidences, the North's 4th nuclear test may have been a successful boosted fission bomb test. North Korea, and, if allowed to go on with its nuclear programs, will become a nuclear power armed with more than 50 nuclear weapons including hydrogen bombs. The North is already conducting nuclear blackmail strategy towards South Korea, and must be developing 'nuclear use' strategies. Accordingly, the most pressing challenge for the international community is to bring the North to 'real dialogue for denuclearization through powerful and consistent sanctions. Of course, China's cooperation is the key to success. In this situation, South Korea has urgent challenges on diplomacy and security fronts. A diplomatic challenge is how to lead China, which had shown dual attitudes between 'pressure and connivance' towards the North's nuclear matters pursuant to its military relations with the U.S, to participate in the sanctions consistently. A military one is how to offset the 'nuclear shadow effects' engendered by the North's nuclear blackmail and prevent its purposeful and non-purposeful use of nuclear weapons. Though South Korea's Ministry of Defense is currently spending a large portion of defense finance on preemption (kill-chain) and missile defense, they pose 'high cost and low efficiency' problems. For a 'low cost and high efficiency' of deterrence, South Korea needs to switch to a 'retaliation-centered' deterrence strategy. Though South Korea's response to the North's nuclear threat can theoretically be boiled down into dialogue, sanction and deterrence, now is the time to concentrate on strong sanction and determined deterrence since they are an inevitable mandatory course to destroy the North' nuclear-first delusion and bring it to a 'real denuclearization dialogue.'

• Journal of Korean Society of Steel Construction
• /
• v.29 no.6
• /
• pp.479-486
• /
• 2017

Steel beams with corrugated web have been widely used in the steel structures. However, it is challenging to weld the section between the corrugated web and the flange straight, which increases the cost of production. In order to solve this issue, steel beam with intaglio and embossed web (It is called an IEB) was invented. A web with embossment is produced by cold pressing and welded to flange by automatic welding machine. The loading tests were conducted to investigate the load-carrying capacity of IEB, and its test result was compared with that of H-shaped beam having a same size of flange and web. The test results of IEB series showed about 40% higher load capacities than H-shaped series. As a result of comparing the IEB specimen with Eurocodes for steel beams with corrugated web, all of specimens tested in this study did not meet the design value. Therefore, it is difficult to apply existing formula to IEB and new design formula should be presented for field application.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.465-475
• /
• 2016

Since inaccurate demand estimation for recent urban rail construction may result in financial burden to cities, precise prediction for operating cost as well as construction costs is necessary to avoid or reduce budget loss of the local or central government. The operating cost is directly related to the public fare and affect a policy to determine the rate system. Therefore, there is a pressing need to develop an estimating model for reliable operating cost of urban railway. This study introduces a new model to estimate the operating cost with new variables. It provides a better prediction in accuracy and reliability compared to the existing model, considering the feature of urban railway. For verification of our model, railway operation data from a few cities for the last five years were comprehensively examined to determine variables that affect the operating cost. The operating cost was estimated in a dummy regression model using five independent variables, which were average distance between stations, daily trains distance, total passenger capacity of a train in a train, driving mode(manned/unmanned), and investment type(financial/private).