• 제목/요약/키워드: PRAIRIE System

검색결과 16건 처리시간 0.023초

라이트의 유소니언 오토매틱 주택 시스템에 나타난 재료 및 공법에 관한 연구 (Materials and Methods in Usonian Automatic House System of Frank Lloyd Wright)

  • 김태영
    • 한국농촌건축학회논문집
    • /
    • 제18권4호
    • /
    • pp.1-8
    • /
    • 2016
  • This study is to investigate the meaning and value of Usonian Automatic House System(UAHS) of Frank Lloyd Wright in his later period, focused on materials, methods, and his thoughts. The results of this study are follows. UAHS was the outcome of moderate cost and prefab house which Wright had successively attempted after the early Prairie period. The construction was simple and comparatively cheap, but subsequent automatics were difficult and expensive to build. Nevertheless, it was sufficiently flexible to support a rather wide range of house designs. Concrete was the inert mass and a plastic material. Wright saw a kind of weaving coming out of it. He also saw a kind of concrete masonry, steel for warp and masonry units for woof in the automatic concrete block. The reinforced bars in hollowed joints of concrete block increased the safety factor and affected the expression of the construction through the stabilization they provided. But they did not give concrete block the capability of structural span. Standardization as the soul of the machine might be seen in UAHS. The concrete blocks were more cheap, lighter, and larger hollowed plain than textile blocks in 1920s. But the variety of pattern and different block types in the UAHS were achieved at some sacrifice of standardization. The repetitive nature of production was compromised for artistic goals. The sense of compromise was not maximized, however, because the units as installed looked far more repetitive than they actually were.

우리 성명(姓名)의 생성 발달에 대하여 (The Origin and Development of Korean Names)

  • 도수희
    • 인문언어
    • /
    • 제1권1호
    • /
    • pp.255-274
    • /
    • 2001
  • This paper examines the history of Korean names, focusing on the structural characteristics and the literal meanings of those for kings and ordinary people. Roughly speaking, the Korean surname system traces its source to China. Historical records show that the Chinese were already using their family names around 1000 B.C. After a millennium or so, the Korean began to follow suit. Initially, however, surnames were in regular use among kings and their kin only: it was not until the late Shilla dynasty, around A.D. 800, that the commoners began to have Heir surnames. And yet, surnames still tended to be limited to men of noble birth, until around A.D. 1000. Though the Korean surname system may be said to have its origin in Chinese, there are no lack of native surnames that have as long a history, e.g., Hae, Bak, Sok, Sol, Ul, and Ol. Typical surnames of Chinese origin that are found during the late Shilla dynasty, around A.D. 900, include Jang (as in Jang Bogo) and Choi (as in Choi Chiwon). Unlike those of Chinese origin, typical Korean names during the age of Three Nations tended to allude to nature or natural phenomena, as can be witnessed in Bit 'light,' Balgum 'bright,' Nuri 'world,' and Soidori where soi means 'steel' and dol 'stone,' Other surnames abound that have to do with river, stream, field, prairie, and so on. King Muryong's original name was Sama, a variant of som 'island,' indicating where he was born. A person skilled in archery was called Jumong or Hwalbo. Baembo was so called because he 'crawls like a snake, baem,' In these last two examples, bo, as well as its variant bu, functions as a suffix, and is also found in Cochilbu, Isabu, Babo, Nolbu, Hungbu, etc. The tradition of using this kind of native Korean names has gradually disappeared, giving place to the names of Chinese style-although very recently we see an on-going movement toward using native names.

  • PDF

IPA를 통한 몽골관광산업의 발전 전략에 관한 연구 (A Study on Developing Strategies of the Mongolia Tourism based on IPA)

  • 이승구;간후
    • 산학경영연구
    • /
    • 제21권2호
    • /
    • pp.43-56
    • /
    • 2008
  • 1990년 사회주의체제 붕괴 후 새롭게 인식되고 있는 몽골의 관광산업은 역사 문화적 관광자원이 풍부함에도 불구하고 관광사업, 관광산업 발전영역이나 관광정책 그리고 관광자원개발 등이 관한 연구가 미흡하다. 따라서 본 연구에서는 외래 관광자의 몽골에 대한 중요하게 생각하는 요인을 찾아내어 관광자가 몽골에서 느끼는 여행과정의 만족도를 조사하고, 여러 분석을 통하여 현재의 몽골관광에 대한 문제점과 개선방안을 제시함을 주된 목적으로 한다. 몽골관광 활성화를 위해서는 관광개발의지와 적절한 사업운영 및 개발절차상 제도적인 문제점 해결 등의 종합적인 정책인 요구된다. 먼저, 몽골관광선택요인 IP분석 결과에서와 같이 전반적으로 모든 요인에 대한 중요성 인식은 차이가 없으나, 관광자의 국적에 따라 중요도 차이가 있는 것으로 나타났다. 둘째, 외래관광객들은 전반적으로 모든 요인에 대해 만족도는 같으나, 국적별 만족 도에 차이가 있는 것으로 나타났다. 셋째, 몽골관광선택요인의 중요도는 전반적인 만족수준에 영향을 미치지 않은 것으로 나타났다. 결국 몽골여행상품의 단순함 보완을 위해 다변화된 관광자원을 이용하여 시장세분화에 적합한 여행상품 제공이 요구되며, 자연자원, 사적지 관람 등의 기존의 확인적인 여행코스를 주 내용으로 하는 상품개발에서 벗어나 변화하는 여행형태와 각 국가별 성향에 맞춘 상품개발이 주된 대안이 된다.

  • PDF

Stability of the prosthetic screws of three types of craniofacial prostheses retention systems

  • Lanata-Flores, Antonio Gabriel;Sigua-Rodriguez, Eder Alberto;Goulart, Douglas Rangel;Bomfim-Azevedo, Veber Luiz;Olate, Sergio;de Albergaria-Barbosa, Jose Ricardo
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제42권6호
    • /
    • pp.352-357
    • /
    • 2016
  • Objectives: This study aimed to evaluate the stability of prosthetic screws from three types of craniofacial prostheses retention systems (bar-clip, ball/O-ring, and magnet) when submitted to mechanical cycling. Materials and Methods: Twelve models of acrylic resin were used with implants placed 20 mm from each other and separated into three groups: (1) bar-clip (Sistema INP, São Paulo, Brazil), (2) ball/O-ring (Sistema INP), and (3) magnet (Metalmag, São Paulo, Brazil), with four samples in each group. Each sample underwent a mechanical cycling removal and insertion test (f=0.5 Hz) to determine the torque and the detorque values of the retention screws. A servo-hydraulic MTS machine (810-Flextest 40; MTS Systems, Eden Prairie, MN, USA) was used to perform the cycling with 2.5 mm and a displacement of 10 mm/s. The screws of the retention systems received an initial torque of 30 Ncm and the torque values required for loosening the screw values were obtained in three cycles (1,080, 2,160, and 3,240). The screws were retorqued to 30 Ncm before each new cycle. Results: The sample was composed of 24 screws grouped as follows: bar-clip (n=8), ball/O-ring (n=8), and magnet (n=8). There were significant differences between the groups, with greater detorque values observed in the ball/O-ring group when compared to the bar-clip and magnet groups for the first cycle. However, the detorque value was greater in the bar-clip group for the second cycle. Conclusion: The results of this study indicate that all prosthetic screws will loosen slightly after an initial tightening torque, also the bar-clip retention system demonstrated greater loosening of the screws when compared with ball/O-ring and magnet retention systems.

Isolation and Genetic Transformation of Primordial Germ Cell (PGC)-Derived Cells from Cattle, Goats, Rabbits and Rats

  • Lee, C.K.;Moore, K.;Scales, N.;Westhusin, M.;Newton, G.;Im, K.S.;Piedrahita, J.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권5호
    • /
    • pp.587-594
    • /
    • 2000
  • At present embryonic stem (ES) cells with confirmed pluripotential properties are only available in the mouse. Recently, we were able to isolate, culture and genetically transform primordial germ cell (PGC)-derived cells from pig embryos and demonstrate their ability to contribute to chimera development in the pig. In order to determine whether the system we developed could be used to isolate embryonic germ (EG) cells from other mammalian species, we placed isolated PGCs from cattle, goats, rabbits and rats in culture. Briefly, PGCs were isolated from fetuses of cow (day 30-50), goat (day 25), rabbit (day 15-18) and rat (day 11-12), and plated on STO feeder cells in Dulbecco's modified Eagle's medium (DMEM): Ham's F10 medium (1:1) supplemented with 0.01 mM nonessential amino acids, 2 mM L-glutamine, 0.1 mM $\beta$ - mercaptoethnol, soluble recombinant human stem cell factor (SCF; 40ng/ml), human basic fibroblast growth factor (bFGF; 20ng/ml) and human leukemia inhibitory factor (LIF; 20ng/ml). For maintenance of the cells, colonies were passed to fresh feeders every 7-10 days. In all species tested, we were able to obtain and maintain colonies with ES-like morphology. Their developmental potential was tested by alkaline phosphatase (AP) staining and in vitro differentiation assay. For genetic transformation, cells were electroporated with a construct containing the green fluorescent protein (GFP) under the control of the cytomegalovirus (CMV) promoter. GFP-expressing colonies were detected in cattle, rabbits and rats. These results suggest that PGC-derived cells from cattle, goats, rabbits and rats can be isolated, cultured, and genetically transformed, and provide the basis for analyzing their developmental potential and their possible use for the precise genetic modification of these species.

구치용 도재소부금관과 전부도재관에 파절을 일으키는 한국음식에 관한 연구 (A comparative study on the correlation between Korean foods and the fractures of PFG and all ceramic crowns for posterior applications)

  • 김정호;이재봉
    • 대한치과보철학회지
    • /
    • 제47권2호
    • /
    • pp.156-163
    • /
    • 2009
  • 연구목적: 4종 구치용도재관(Full-porcelain-occlusal-surfaced PFG, Half-porcelain-occlusal-surfaced PFG, Empress 2, Ice Zirkon)과 선별된 한국음식의 fracture load와 dynamic cyclic load를 측정하여 구치용 도재관에 파절을 일으킬 가능성이 있는 한국음식을 선별하는데 있다. 연구재료 및 방법: 4종의 각 porcelain 보철물 system 당 15개의 축대칭을 이루는 crown을 제작했다. 이때 occlusal reduction은 1.5-2.0 mm로 했다(중심부 1.5 mm, 교두부 2.0 mm). 각 15개의 시편의 교합면 중앙부에 직경 5 mm의 stainless steel ball을 위치시킨 후 Instron 4465 universal testing machine(Instron, Norwood, MA USA)을 이용하여 5 mm/min의 crosshead speed로 수직 부하를 주어 파절을 일으키는 최대 부하(N)를 기록했다. 이후, 한국음식 중 삶은 게, 닭(뼈포함), 소갈비(뼈포함), 마른 오징어, 건멸치, 사탕, 호두껍질을 표본으로 설정하고 이들을 파절시키는 최대 부하(N)를 universal testing machine(Instron 4465) 에서 측정하여 기록했다. 각 항목당 15번을 측정했다. 음식물을 파절시킬 때 필요한 최대부하와 각 보철물의 파절저항을 비교하여 한국의 식습관과 도재를 이용한 보철물 파절의 상관관계를 조사하였다. fracture loads는 analysis of variance 와 Post Hoc tests를 이용해서 분석하였다($\alpha$=0.05). 차후에 위에서 얻은 결과를 바탕으로 Hydraulic Dynamic Fatigue Testing Machine(858 Bionix II, MTS systems, Eden Prairie, MN USA)를 이용하여 4종의 각 porcelain 보철물 system당 5개의 crown에 14Hz Cyclic Load를 가하여 crown에 파절을 일으키는 masticatory cycle수를 알아 보았다. Load 수치는 41.0 N(건멸치 파절강도), 169.0 N(마른오징어 파절강도), 382.9 N(닭뼈 파절강도), 2224.8 N(사탕 파절강도)로 설정하였다. 결과: 95% confidence intervals for mean fracture load는 2599.3-2809.1 N(완전도재교합면 PFG), 3689.4-3819.9 N(반도재교합면 PFG), 1501.2-1867.9 N(Ice Zirkon), 803.2-1188.5 N(Empress 2)로 나왔고 95% confidence intervals for dynamic cyclic load on fracture는 instron 상에서 도재보철물에 파절을 일으키지 않은 load인 2224.8 N(사탕 파절강도)와 382.9 N(닭뼈 파절강도)로 실험했을 때, 2224.8 N에서 4796.8-9321.2 cycles(완전도재교합면 PFG), 2224.8 N에서 881705.1-1143565.7 cycles(반도재교합면 PFG), 382.9 N에서 979993.0-1145773.4 cycles(Ice Zirkon), 382.9 N에서 564.1-954.7 cycles(Empress 2)로 나왔다. 결론: 통계학적으로 유의할 만한 차이가 그룹들 간 fracture load에서 나타났다. 한국음식물 중 소갈비(뼈포함)와 사탕(자두맛캔디)은 구치용 도재보철물을 파절시킬 가능성이 있는 음식물로 밝혀졌다. 단일수직부하에서는 파절이 생기지 않는 경우라 할지라도 dynamic cyclic load를 줄 경우 일정 주기 후에 파절이 생기는 결과를 얻을 수 있었다.