• Magazine of the Korea Concrete Institute
• /
• v.7 no.1
• /
• pp.126-135
• /
• 1995

The strength development of PFA concretes were invest~gated in this study. The work undertaken was divided into two parts which considered both the influence of PFA replacement level up to 45% and the effect of cement type at the high PRA leveI(45%). The additiorlal cement considered included a rapdhardemng portland ccnlent. The full range of concrete struc tural grades were studied anti ciight cu~ing contlltiorls covering those 11:ied 111 practlce were examined. The early strength retluced wit11 increasing PFA content. However, post 28days, the reverse was observed. It was posslhle through the use of rapid hardening portland cement at the high PFA level to achieve similar early strength to OPC concrete, with the same benefits noted above also being obtained post 28 days. The compressive strength uf hlgh PYA content concrt:tes at hgh temperature m s found to be higher than the ccmtrol at all ages hoth in water and alr. The same trends were observed at low t.ernperature in air. However, the reverse occur-ed at the low temperature In water.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5245-5249
• /
• 2012

Background: Opisthorchis viverrini infection is a serious public-health problem in Southeast Asia especially in Lao PDR and Thailand. It is associated with a number of hepatobiliary diseases and the evidence strongly indicates that liver fluke infection is the major etiology of cholangiocarcinoma. Objectives: This study aimed to determine actual levels of Opisthorchis viverrini infection in Nakhon Ratchasima province, Northeast Thailand. Methods: A cross-sectional survey was conducted during a one year period from October 2010 to September 2011. O. viverrini infection was determined using a modified Kato's thick smear technique and socio-demographic data were collected using predesigned semi-structured questionnaires. Results: A total of 1,168 stool samples were obtained from 516 males and 652 females, aged 5-90 years. Stool examination showed that 2.48% were infected with O. viverrini. Males were slightly more likely to be infected than females, but the different was not statistically significant. O. viverrini infection was most frequent in the 51-60 year age group and was found to be positively associated with education and occupation. Positive results were evident in 16 of 32 districts, the highest prevalence being found in Non Daeng with 16.7%, followed by Pra Thai with 11.1%, Kaeng Sanam Nang with 8.33%, and Lam Ta Men Chai (8.33%) districts. Conclusion: This study indicates that O viverrini is still a problem in some areas of Nakhon Ratchasima, the patients in this study bing suitable for the purpose of monitoring projects.

• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.461-467
• /
• 2009

This paper provides two case studies of environmental impacts with socio-economic values. The first case is on flood protection levees conducted from 2003 to 2004 in Phu Tan district, An Giang province. The impacts were found by comparing full flood protection levees area (FFPL) to non-full flood protection levees area (NFFPL). Participatory Rural Appraisal (PRA) tools per each group of rich, middle, and poor people were used to list the impacts. Then, major impacts were selected by ranking and interviewing 60 households per site, and assessed by Cost Benefit Analysis (CBA) in rice production from 1996 to 2002 between two areas. The tested research indicated moving system of NFFPL to that of FFPL lost about 11 million VND/ha/year. The second case is on impacts of Penaeid shrimp farming conducted in Duyen Hai District, Tra Vinh Province in 2004-2005. Ninety households and 12 local officials were interviewed. Four PRAs were conducted and 36 water samples were taken inside and outside shrimp pond to measure values of DO, COD, Fe total, TSS, N-$NO_3{^-}$, N-$NH_4{^+}$, P-$PO{_4}^{3-}$, and Chlorophyll-a. Research results showed only 36.7% of the households got profit from shrimp farming. Highest financial efficiency was 0.72 for the semi-intensive system. Tested water indicators showed surface water quality did not match Vietnamese standard for surface water in coastal area (TCVN 5943-1995) and in rain. The water was very muddy and contaminated by organic aluminum. Summarily, the impacts were clarified more obviously via adding socio-economic values to assessment. Importantly, the values were transformed to household's income which is an indicator for policy-makers to consider the impacts obviously. Besides, data of different group of people impacted are cases contributing to consideration of the impacts in an appropriate social level.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.156-159
• /
• 2008

The electrical characteristic of SiGe-on-SOI (SGOI) wafer with different Ge concentration were evaluated by pseudo-MOSFET. Epitaxial SiGe layers was grown directly on top of SOI with Ge concentrations of 16.2, 29.7, 34.3 and 56.5 at.%. As Ge concentration increased, leakage current increased and threshold voltage shifted from 3 V to 7 V in nMOSFET, from -7 V to -6 V in pMOSFET. The interface states between buried oxide and top of Si was significantly increased by the rapid thermal annealing (RTA) process, and so the electrical characteristic of SGOI wafer degraded. On the other hand, additional post RTA　annealing (PRA) showed that it was effective in decreasing the interface states generated by RTA processes and the electrical characteristic of SGOI wafer enhanced higher than initial state.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.429-437
• /
• 2015

It has been known that acetylation improves the dimensional stability of wood. Liquid phase acetylation is more popular than gas-phase acetylation for the effectiveness of weight gain of wood. In this study domestic red and Korean pine specimens were liquid phase acetylated and their physical properties, such as density, bending strength, dimensional stability etc., were investigated. Acetylation increased the average weights of red and Korean pine specimens by 10.4% and 9.2%, respectively, and their average oven-dry densities were increased by 6.9% and 4.6%, respectively. Acetylation did not influence on modulus of rupture (MOR), modulus of elasticity (MOE) and dynamic MOE (DMOE). The average percentage reduction in hygroscopicity (PRH) of red and Korean pine specimens were respectively 20.6% and 13.8%, while the average percentage reduction in water soaking (PRW) were respectively 20.0% and 8.5%. Thus it can be concluded that the liquid acetylation improved the dimensional stability of red pine specimens more than that of Korean pine specimens.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06c
• /
• pp.176-179
• /
• 2011

본 연구에서는 T-Test와 Genetic Algorithm을 사용해 Luminex 사용 환경에서 난소암을 진단할 수 있는 바이오마커의 조합을 찾고 Cancer와 Normal간의 분류 성능을 평가해 보았다. 바이오마커는 혈액, 체액 내의 특정 질환 여부나 상태를 나타내는 단백질, DNA들의 지표 물질이다. 정상인과는 다른 분포를 가진 성분이 환자의 혈액이나 체액에서 발견되면 이를 토대로 질병유무와 상태를 판단할 수 있다. 난소암을 진단할 수 있는 바이오마커 조합을 찾기 위해 T-Test와 Genetic Algorithm를 사용하여 분류성능이 좋은 바이오마커 조합을 각각 선별해 보았고, 선별된 각각의 마커조합을 선형분류기(LDA)를 사용해 평균 민감도, 특이도, 정확도를 비교해 보았다. 실험데이터는 두 곳의 병원에서 제공받은 총 58명(Cancer 27명, Normal 31명)의 혈청에서 21 종류의 바이오마커 데이터를 Luminex-PRA를 통해 얻었다. 본 연구에서는 T-Test로 만들어진 마커조합이 Genetic algorithm으로 만들어진 마커조합 보다 더 좋은 민감도, 특이도, 분류정확도를 보여주었다.

• Nuclear Engineering and Technology
• /
• v.21 no.3
• /
• pp.205-215
• /
• 1989

The EVNTREISS code, used as a basis of the present work, is highly complex and versatile in comparison with the previous CET used in the WASH-1400 study. Since the construction of the EVNTREISS code is very complex and has not gone through a thorough validation and review process by an independent referee it is not surprising to find a few areas of improvement and several inherent problems of the code. The present study is thus initiated to identify all the problems and areas of improvement for the EVNTREISS code and modify the code according to the insights gained from the experience of reproducing the Zion containment response analysis performed at the Brookhaven National Laboratory. As a result of this study, several areas of improvement for the EVNTREISS code have been identified and a few problems of the code have been resolved in addition to the reproduction of the Zion results. Finally, the modified code can now be run by a personal computer and can be used in the analysis of a Large Dry PWR containment response for severe accidents.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.167-176
• /
• 2006

It was found that Korean Standard of Estimate which has been used as the only basis of cost estimate of public construction projects had some side effects such as jerry-build construction and over-estimation because it failed to reflect the current price and the state-of-the-art construction methods in a changing construction environment. Therefore, the government decided to gradually introduce historical construction cost into cost estimate of public construction projects from 2004. This paper presents analytic criteria and a process model for deducing more current and reasonable historical construction cost for contract items from not only previous contract prices but also all of the other bid prices that were not contracted. The procedure of estimating actual unit cost proposed in this paper focuses on the removal of abnormal values including strategically too low or high prices and the time correction. In addition, basic research is conducted for the correction of actual unit cost through the analysis of fluctuation of bid price depending on bidding types and rates of successful bid. It is anticipated that the effective use of the proposed process model for estimating actual unit cost would make the cost estimation more current and reasonable.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.54-59
• /
• 2007

Recently, Apartment Reconstruction Projects are performing only with the basis of profitability without establishing either certain criteria or standard guideline. In addition, the profitability information contained in a disposal plan tends to be considered as a fixed value, and it is frequently changeable because reconstruction projects have such a long time to complete and many participants with respective interests. As mentioned above, the new approach needs to be developed which covers the limitation of the unvaried one. Consequently, this study focuses on the probability approach considering not only variances that affect the profit, but the relationship between profit and risk, and then is modeling. This study is anticipated to improve the reliability and accuracy of expected value as well as apply to the decision making criteria quantitively about potentially hidden risks in that projects.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.5
• /
• pp.297-309
• /
• 2018

After an accident involving mooring link failures in an offloading buoy, verification of the fatigue safety in terms of the out-of-plane bending (OPB) and in-plane bending (IPB) moments has become a key engineering item in the design of various floating offshore units. The mooring links for an 8 MW floating offshore wind turbine were selected for this study. To identify the OPB stiffness (OPB moment versus interlink angle), a numerical simulation model, called the 3-link model, is usually composed of three successive chain links closest to the fairlead or chain hawse. This paper introduces two numerical simulation techniques for the 3-link analyses. The conventional and advanced approaches are both based on the prescribed rotation approach (PRA) and direct tension approach (DTA). Comparisons of the nominal stress distributions, OPB stiffnesses, hotspot stress curves, and stress concentration curves are presented. The multiple link analyses used to identify the tension angle versus interlink angle require the OPB stiffness data from the 3-link analyses. A convergence study was conducted to determine the minimum number of links for a multi-link analysis. It was proven that 10 links were sufficient for the multi-link analysis. The tension angle versus interlink angle relations are presented based on multi-link analyses with 10 links. It was found that the subsequent results varied significantly according to the 3-link analysis techniques.