• Journal of the Korean Solar Energy Society
• /
• v.39 no.2
• /
• pp.33-43
• /
• 2019

In this study, reflecting long-term climate characteristics, we analyzed electricity generation and generation characteristics of 3kWp PV system, which was semi-integrated with air duct behind. Using PVsyst as a simulation analysis tool, we inputted "National reference standard weather data" of 16 regions as a typical climatic data. The result is summarized as follows: First, the national average annual electricity generation was 1,312 kWh/kWp (StDev, ${\sigma}=71$). It was most abundant in Mokpo with 1,434 kWh/kWp, which was average 21% greater than the lowest with 1,165 kWh/kWp in Seoul and 1,197 kWh/kWp in Jeju. National average daily generating time based on STC was 3.6 hours (${\sigma}=0.43$), and that of Mokpo and Seoul was 3.9 and 3.2 hours respectively. Second, Jeju showed the great difference of annual monthly generation by month (annual average = 99.7 kWh/kWp, ${\sigma}=25.5$), while Jinju showed the smallest difference (annual average = 115.5 kWh/kWp, ${\sigma}=10.6$). Generation in Jeju was at the largest in April with 132.2 kWh/kWp, which was 2.3 times greater than the lowest 55.2 kWh/kWp in January. However, generation in Jinju was at the largest in March with 129.3 kWh/kWp, which was only 1.3 times greater than the lowest 101.1 kWh/kWp in June. Third, the annual average PR was the highest in Incheon with 85.8% and the lowest in Jeju with 83.2%. PR of Mokpo was 84.3%, which was lower than that of national average.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.253-256
• /
• 2014

Background: The standard treatment in the metastatic colorectal cancer consists of 5-FU based infusional regimens. However, with oral fluoropyrimidines, equal tumor responses may be obtained. Capecitabine causes macrocytosis of the cells by inhibition of DNA synthesis. In this context, a relationship was found between mean corpuscular volume (MCV) and response to therapy in breast cancer patients treated with Capecitabine, but whether this relationship also pertains in colorectal cancer has not been established. Materials and Methods: A total of 102 metastatic colorectal cancer patients treated with a oxaliplatin (XELOX)${\pm}$Bevacizumab combination were retrospectively evaluated. Patients were randomized into three groups. Hematological parameters (MCV, MPV, PCT, PLT, NLR) were recorded retrospectively, before treatment and after 3 cycles of chemotherapy. Results: After three cycles of therapy, 20 (19.6%) patients had progressive disease (PD), 41 (40.1%) had stable disease (SD), and 41 (40.1%) demonstrated a partial response (PR). In 62 (60.7%) treatment was with capesitabin plus XELOX therapy, and in 40 (39.2%) it was XELOX-Bevacizumab combination therapy. There was no difference among three groups before the treatment in terms of MCV, MPV, PCT, PLT, and NLR. MCV showed significant increase in chemotherapy response groups (PR and SD). In addition, a significant decrease was observed for platelet count in chemotherapy response groups. While NLR decrease was seen in only a PR group, PCT decrease was observed in all three groups. PCT and PLT values were higher in patients receiving Bevacizumab. Conclusions: PLT, PCT, MPV, and NLR values were decreased due to Capecitabine-based chemotherapy, however MCV was increased. PCT and PLT values were higher in patients who received Bevacizumab than those who did not. MCV, PLT, and NLR can be considered as important factors in predicting response to colorectal carcinoma treatment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.664-670
• /
• 2002

The electrical characteristics of $ZnO-Pr_6O_{11}-CoO-Cr_2O_3-Y_2O_3$(ZPCCY)-based varistors were investigated with $Y_2O_3$ content in the range of 0.0~4.0 mol%. As $Y_2O_3$ content is increased, the average grain size was markedly decreased in the range of 18.6~3.2 $\mu m$ and the density of the ceramic was decreased in the range of 5.53 ~3.74 $g/\textrm{cm}^3$. While, the varistor voltage was increased in the range of 39.4~748.1 V/mm and the nonlinear exponent was in the range of 4.5~51.2 with increasing $Y_2O_3$ content. The addition of $Y_2O_3$ greatly enhanced the nonlinear properties of varistors, compared with the varistor without $Y_2O_3$. In particular, the varistors with $Y_2O_3$content of 0.5 mol% exhibited the highest nonlinearity, in which the nonlinear exponent is 51.2 and the leakage current is 1.3 $\mu A$. The donor concentration and the density of interface states were decreased in the range of (4.19~0.14) $\times$10$^{18}$ /㎤ and (5.38~1.15)${\times}10^{18}/\textrm{cm}^3$, respectively, with increasing $Y_2O_3$ content.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.3
• /
• pp.937-940
• /
• 2012

Due to lack of sufficient data on characteristics of breast cancer patients and risk factors for developing metastasis in Iran this study was designed to understand clinical aspects impacting on survival. A cross-sectional study on breast cancer patients was conducted in an oncology clinic of the university hospital between 1995 and 2010. Data were retrieved from medical records and included age, menopausal status, tumor diameter, number of involved nodes, histopathological type, estrogen and progesterone receptor expression, c-erbB-2, primary and secondary metastasis sites, overall survival, disease free interval and type of chemotherapy protocol. The results were analyzed with SPSS 13 software. The mean age of the patients was 49.2 (27-89) years. The primary tumors were mainly ER positive (48%) and PR negative (49.3%). The status of lymph nodes dissected and examined in these patients was unknown in 19 patients (25.3%) while 18 patients (24%) had positive lymph nodes with no report on the number of involved nodes. All of the patients had received antracyclin based chemotherapy in an adjuvant or metastatic setting. Adjuvant hormonal therapy was administered to receptor positive patients. In average, overall survival after recurrence was 30 months (95%CI 24.605-35.325) for non-skeletal versus 42 months (95%CI 31.211-52.789) for skeletal metastasis (P= 0.002). The median survival was also greater for receptor positive patients; 39 months (95%CI 33.716-44.284) for PR+ versus 26 months (95%CI 19.210-32.790) for PR- (P=0.047) and 38 months (95%CI 32.908-43.092) for ER+ versus 27 months (95%CI 18.780-35.220) for ER- patients (P=0.016). No relation was found between site of first metastasis and hormone receptor, age, tumor diameter, DFI and menopausal status. Sites of metastasis were independent of age, size of the tumor, menopausal and hormone receptor status in this study. Overall survival provided significant relations with respect to receptor status and bone metastasis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.10
• /
• pp.897-901
• /
• 2003

The microstructure and varistor characteristics of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Dy$_2$O$_3$(ZPCCD)-based ceramics were investigated with Dy$_2$O$_3$ content in the range of 0.0∼2.0 mol%. As Dy$_2$O$_3$ content is increased, the average grain size was decreased in the range of 18.6∼4.7 $\mu$m and the density was decreased in the range of 5.53∼4.34 g/cm$^3$. While, the varistor voltage was increased in the range of 39.4∼436.6 V/mm and the nonlinear exponent was in the range of 4.5-66.6 with increasing Dy$_2$O$_3$ content. The addition of Dy$_2$O$_3$ highly enhanced the nonlinear properties of varistors, compared with the ceramics without Dy$_2$O$_3$ Particularly, the ceramics with Dy$_2$O$_3$ content of 0.5 mol% exhibited the highest nonlinearity, in which the nonlinear exponent is 66.6 and the leakage current is 1.2 $\mu$A.A.A.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.4
• /
• pp.213-216
• /
• 2014

The microstructure and varistor properties of ZPCCAE ($ZnO-Pr_6O_{11}-CoO-Cr_2O_3-Al_2O_3-Er_2O_3$) ceramics were investigated with different erbium amounts. Analysis of the microstructure indicated that the ceramics consisted of ZnO grains as a bulk phase, and intergranular layers (mixture of $Pr_6O_{11}$ and $Er_2O_3$) as a minor secondary phase. With the increase of the doped erbium amount, the densities of sintered pellets increased from 5.63 to $5.82g/cm^3$, and the average grain size decreased from 9.0 to $5.7{\mu}m$. The increase of the doped erbium amount increased the breakdown field from 2,649 to 5,074 V/cm, and the nonlinear coefficient from 27.6 to 39.1. It was found that in the range of 0.25 to 0.5 mol%, the doped erbium had little effect on the microstructure and electrical properties.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.166-169
• /
• 2006

A promising capacitor, which has conformable step coverage and good uniformity of thickness and composition, is needed to manufacture high-density non-volatile FeRAM capacitors with a stacked cell structure. In this study, ferroelectric $Bi_{3.61}Nd_{0.39}Ti_3O_{12}$ (BNT) thin films were prepared on $Pt(111)/Ti/SiO_2/Si$ substrates by the liquid delivery system MOCVD method. In these experiments, $Bi(ph)_3$, $Nd(TMHD)_3$ and $Ti(O^iPr)_2(TMHD)_2$ were used as the precursors and were dissolved in n-butyl acetate. The BNT thin films were deposited at a substrate temperature and reactor pressure of approximately $600^{\circ}C$ and 4.8 Torr, respectively. The microstructure of the layered perovskite phase was observed by XRD and SEM. The remanent polarization value (2Pr) of the BNT thin film was $31.67\;{\mu}C/cm^2$ at an applied voltage of 5 V.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.107-107
• /
• 2012

본 연구에서는 GaAs p-i-n 태양전지구조에 InAs 양자점을 삽입하여 계면의 전기장 변화를 Photoreflectance (PR) 방법으로 연구하였다. InAs/GaAs 양자점 태양전지구조는 n-GaAs 기판위에 p-i-n 구조의 태양전지를 분자선박막성장 장치를 이용하여 제작하였다. GaAs p-i-n 태양전지와 p-QD(i)-n 양자점 태양전지를 제작하여 계면전기장의 변화를 PR 신호에 나타난 Franz-Keldysh oscillation (FKO)으로부터 측정하였다. 기본적인 p-i-n 구조에서 두 가지 전기장성분을 검출 하였고 양자점 태양전지구조에서는 39 kV/cm 이상의 내부전기장이 존재함을 관측하였다. 이러한 내부전기장은 양자점 주변에 형성된 국소전기장의 효과로 추측하였다. 아울러 양자점을 AlGaAs 양자우물 구조에 삽입하여 케리어의 구속에 의한 FKO의 변화를 관측하였으며 양자점 태양전지의 구조적 변화에 따른 효율을 측정하여 비교 분석하였다.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.219-223
• /
• 2005

A promising capacitor, which has conformable step coverage and good uniformity of thickness and composition, is needed to manufacture high-density non-volatile FeRAM capacitors with a stacked cell structure. In this study, ferroelectric $Bi_{3.61}Nd_{0.39}Ti_3O_{12}$ (BNdT) thin films were prepared on $Pt(111)/TiO_2/SiO_2/Si$ substrates by the liquid delivery system MOCVD method. In these experiments, $Bi(ph)_{3}$, $Nd(TMHD)\_{3}$ and $Ti(O^iPr)_{2}(TMHD)_{2}$ were used as the precursors and were dissolved in n-butyl acetate. The BNdT thin films were deposited at a substrate temperature and reactor pressure of approximately $600^{\circ}C$ and 4.8 Torr, respectively. The microstructure of the layered perovskite phase was observed by XRD and SEM. The remanent polarization value (2Pr) of the BNdT thin film was $31.67\;{\mu}C/cm^{2}$ at an applied voltage of 5 V.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.224-230
• /
• 1999

$SrBi_{2x}Ta_2O_9$ (SBT) thin films were prepared on platinized silicon substrates by MOD process, and their ferroelectric and leakage current characteristics were investigated. The grain size of the MOD derived SBT films increased with increasing the BI/Ta mole ration. Although the SBT films with x of 0.8~1.2 were composed of the equiaxed grains, the elongated grains were also observed for the SBT films with x of 1.4 and 1.6. The SBT film with x of 1.2 exhibited the optimum ferroelectric properties of 2PR : 9.79 $\muC/\textrm{cm}^2$ and Ec : 24.2kV/cm at applied voltage of 5V. The leakage current density of the SBT films increased with increasing the BI/Ta mole ratio. With post annealing process, 2Pr and $E_c$of the SBT film with x of 1.2 increases 11.3 $\muC/\textrm{cm}^2$ and 39.6kV/cm, respectively. decrement of the leakage current density by post annealing process increased remarkably with increasing the Bi/ta mole ratio, and the SBT film with x=1.6 exhibited the lowest leakage current density after post annealing process.