• 청정기술
• /
• 제4권2호
• /
• pp.32-40
• /
• 1998

Polypropylene(PP)과 polyethylene(PE) 분체를 혼합하여 공기정화용 여과재로 사용하기 위한 기공성 고분자 소재를 압출 소결법으로 제조하였다. PP와 PE로 구성된 기공성 고분자 소재는 녹는점이 낮은 PE가 용융되어 PP를 결합시킨 구조임을 주사전자현미경(scanning electron microscope) 분석으로 관찰할 수 있었으며, 고분자 소재의 압출 소결시 압출기 다이 헤드의 온도, 압출 속도, PE의 용융지수 및 첨가량 변화 등에 따른 기공성 고분자 소재의 기계적물성과 여과특성 변화를 시험하였다. 일정한 압출기 헤드 다이 온도와 압출 속도하에서 압출 소결법으로 제조된 기공성 고분자 소재의 여과효율이 PE의 첨가량과는 비례 관계를 나타내었으나 PE의 용융지수에는 반비례 관계를 나타냄을 관찰할 수 있었다. 압출 소결법으로 제조된 기공성 고분자 소재의 여과특성을 시험한 결과, PP와 PE로 구성된 기공성 고분자 소재가 공기정화용 여과재로 적용될 수 있음을 확인할 수 있었다.

• 공업화학
• /
• 제29권2호
• /
• pp.168-175
• /
• 2018

본 논문에서는 대나무 섬유(BF)의 화학처리가 BF 및 폴리프로필렌(PP)/대나무섬유(BF) 복합체의 물성에 미치는 영향을 고찰하기 위해, 알칼리 처리 전후의 BF에 대해 ${\gamma}$-aminopropyltriethoxysilane (APS), ${\gamma}$-glycidoxypropyl-trimethoxysilane (GPS) 그리고 ${\gamma}$-mercaptopropyltrimethoxysilane (MRPS)을 이용하여 실란 상용화제를 처리하였다. BF의 화학처리에 따른 형태학적 특성은 광학현미경(OM)과 주사전자현미경(SEM)을 통해 확인하였으며, 화학 구조의 변화는 FT-IR과 EDS를 통해 확인하였다. 실란처리 시 BF의 열안정성이 증가함을 TGA를 통해 확인하였다. 실란 처리한 PP/BF 복합체의 굴곡강도와 충격특성이 개선되는 것을 만능시험기(UTM)와 충격강도시험기(Izod impact test)를 통해 확인하였고, PP/BF 계면 접착특성이 개선되는 것을 인장시험 후 시편의 파단면을 SEM 사진을 통해 확인하였다.

• 한국가축번식학회지
• /
• 제21권3호
• /
• pp.255-264
• /
• 1997

The purpose of this study was attempted to investigate the number changes of the growing and mature follicles in ovary following repeats of pregnant mare serum gonadotropin(PMSG) treatments for superovulation in nulliparous rats. Thirty two rats(Sprague-Dawely, about 200~250 gm) were randomized into 4 groups. Control group rats were sacrified at estrus phase confirmed by vaginal smear. PMSG-treated group 1 rats, PMSG-treated group 2 rats and PMSG-treated group 3 rats were sacrified at 48 hrs after injection once with PMSG 25 IU, after 2 repeated injection by a week interval, and 3 repeated injection, respectively. The uteri and ovaries of rats were removed and weighed and then were observed grossly and serial sections of all ovaries and some sections of uteri by paraffin embedding were stained with H-E. Number of ovarian follicles about 3 grades of small, middle and large follicles from seondary and follicles were investigated by LM photographies of ovary preparations. The criteria of the small, middle, and large follicles were based as small follicle with preantral follicles with 2~4 layers of granulosa cells surrounding the oocyte, as secondary follicles with more than 5 layers of granulosa cells and early signs of antral cavity or with small clefts on either side of the oocytes, and as tirtiary follicles with a single medium sized antral cavity or large well-formed antral cavity, respectively. In gross findings, the wall of the uteri in control group were thin, and those in 3 PMS-treated group were markedly thickened and some uterine lumen of those filled with fluid. In histological findings, the walls of the uteri from 3 PMSG-treated groups were hypertrophied and their blood and lymph vessels were dilated than those of control group. The ovaries fo 3 PMSG-treated groups were more increased in size and the cortexes were more developed and increased in width but there are no difference of development and changes in 3 PMSG-treated groups. The weight of the uteri and ovaries per rat in PMSG -treated group 1, 2 and 3 were a, pp.ared to be significantly increased 171.4$\pm$47.6%, 162.3$\pm$43.9%, 206.9$\pm$30.4%, respectively than those of control groups. The mean number of follicle per ovary in control group were a, pp.ared to be 17.1$\pm$3.5, 46.2$\pm$14.5, and 74.3$\pm$22.7 at large, middle and small follicles, respectively and total number of these 3 grade follicles per ovary were a, pp.ared to be 137.7$\pm$31.7. The mean number of follicle per ovary in PMSG-treated group 1 were a, pp.ared to be 25.6$\pm$7.3, 78.1$\pm$29.9, and 83.2$\pm$34.0, at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 187.5$\pm$58.8. The mean number of follicle per ovary in PMS-treated group 2 were a, pp.ared to be 21.9$\pm$5.2, 67.8$\pm$16.8, and 68.0$\pm$14.9 at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 157.7$\pm$26.2. The mean number of follicle per ovary in PMS-treated group 3 were a, pp.ared to be 21.7$\pm$4.8, 61.5$\pm$17.0, and 59.7$\pm$16.2 at large, middle and small follicles, respectively and total number of these 3 grade follicles were a, pp.ared to be 143.5$\pm$29.6. The number of follicles in PMSG-treated group 1 a, pp.ared to be more number than other 2 PMSG-treated gruops and tended to be decreased by frequency of PMSG-treatment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제6회 학술발표회 논문개요집
• /
• pp.50-50
• /
• 1994

Half-metallic Heusler alloys (NiMnSb, ppdMnSb, pptMnSb) have attracted much attention due to their unique electronic and magnetic structures. Sppin-ppolarized band structure calculation ppredicts metallic behavior for the majority sppin states and semiconductor behavior for the minority sppin states. We have studied the electronic structures of these half-metallic Heusler alloys by core-level pphotoemission sppectroscoppy of Mn 2pp and 3s XppS sppectra. We found large intensities of Mn 2pp satellites and 3s exchange spplitting comppared with other metal Mn-alloys. These satellite structure can be understood by applying Anderson imppurity model. This fact supports the calculated sppin pprojected ppartial density of states which suggests that the valence electrons be highly sppin ppolarized near Fermi level and that the electrons involved with charge-transfer be mainly minority sppin ones which have semiconducting band structure. The trend of charge transfer energies Δ from ligands (Sb 5pp) to Mn 3d, obtained from our model fitting, is consistent with that calculated from sppin pprojected ppartial density of state. Also the trend of d-d electron correlation energies U calculated from Mn Auger line L3 VV by Mg $K\alpha$ source is comppatible with that resulted from our model fitting. We fitted the Mn 3s curve in the same way as for insulating Mn comppounds by using the same pparameters calculated from Mn 2pp curve fitting exceppt for the Coulomb interaction energy Q between core hole and d-electrons. The 3s sppectra were analyzed by combing the charge transfer model and a simpple model taking into account the configuration mixing effect due to the intra-shell correlation. We found that the exchange interaction between 3s hole and 3d electrons is mainly respponsible for the satellite of Mn 3s sppectra. This is consistent with the neutron scattering data, which suggests local 3d magnetic moment. We find that the XppS analysis results of Mn 2pp and 3s satellite structures of half-metallic Heusler alloys are very similar to those of insulating transition metal comppounds.

• Ocean and Polar Research
• /
• 제45권3호
• /
• pp.125-140
• /
• 2023

We investigated meiofaunal biofouling (40-1,000 ㎛) on stranded marine plastic debris (hereafter MPD) collected from 8 coastal areas highly affected by plastic pollution located in the southern part of Korea during June, 2021, in order to analyze the abundance and composition of MPD associated organisms. A total of eight shapes of MPD was collected and classified into four types of plastics (LDPE, PET, PP and EPS) based on Resin Identification Coding System. Meiofounal biofouling was identified into 35 taxa belonging to 11 phylum, 10 classes and 12 order, and were numerically dominated by harpacticoids (EPS: 21.6%, PP: 27.1%), nematodes (LDPE: 23.2%) and foraminiferans (PET: 29.6%). Surface area of MPD was negatively correlated with abundances of organisms on the plastic debris (r = -0.487, p < 0.05, n = 24), indicating that abundances (avg. 3,225 inds. 0.1 m^-2) on the smallest area of PP debris (avg. 0.0208 m² ) were higher than those (avg. 50 inds. 0.1 m^-2) on the largest area of LDPE debris (avg. 0.4029 m^-2). Whereas, there was no correlation between surface area of MPD and the number of taxa on the debris (r = 0.147, p = 0.49, n = 24). These results showed that higher abundances of meiofaunal biofouling were observed on the PP material debris than those on the other debris collected from eight hot spots of the southern coastal waters in Korea, associated with not only polymer type and surface area of the PP debris, but also possibly surface microstructure of the PP debris.

• Carbon letters
• /
• 제15권2호
• /
• pp.117-124
• /
• 2014

Conductive polymer composites (CPCs) consist of a polymeric matrix and a conductive filler, for example, carbon black, carbon fibers, graphite or carbon nanotubes (CNTs). The critical amount of the electrically conductive filler necessary to build up a continuous conductive network, and accordingly, to make the material conductive; is referred to as the percolation threshold. From technical and economical viewpoints, it is desirable to decrease the conductive-filler percolation-threshold as much as possible. In this study, we investigated the effect of polymer/conductive-filler interactions, as well as the processing and morphological development of low-percolation-threshold (${\Phi}c$) conductive-polymer composites. The aim of the study was to produce conductive composites containing less multi-walled CNTs (MWCNTs) than required for pure polypropylene (PP) through two approaches: one using various mixing methods and the other using immiscible polymer blends. Variants of the conductive PP composite filled with MWCNT was prepared by dry mixing, melt mixing, mechanofusion, and compression molding. The percolation threshold (${\Phi}c$) of the MWCNT-PP composites was most successfully lowered using the mechanofusion process than with any other mixing method (2-5 wt%). The mechanofusion process was found to enhance formation of a percolation network structure, and to ensure a more uniform state of dispersion in the CPCs. The immiscible-polymer blends were prepared by melt mixing (internal mixer) poly(vinylidene fluoride) (PVDF, PP/PVDF, volume ratio 1:1) filled with MWCNT.

• Journal of Microbiology
• /
• 제44권5호
• /
• pp.473-479
• /
• 2006

A well characterized naphthalene-degrading strain, Pseudomonas putida PpG7 was observed to utilize limonin, a highly-oxygenated triterpenoid compound as a sole source of carbon and energy. Limonin concentrations evidenced a 64% reduction over 48 h of growth in batch cultures. Attempts were made to acquire a plasmid-less derivative via various methods (viz. Ethidium Bromide, SDS, elevated temperature & mitomycin C), among which the method involving mitomycin C ($20{\mu}g/ml$) proved successful. Concomitant with the loss of plasmid in P. putida PpG7 strain, the cured derivative was identified as a $lim^-$ phenotype. The $lim^+$ phenotype could be conjugally transferred to the cured derivative. Based on the results of curing with mitomycin C, conjugation studies and presence of ndo gene encoding naphthalene 1,2 dioxygenase, it was demonstrated that genes for the limonin utilization were encoded on an 83 kb indigenous transmissible Inc. P9 NAH plasmid in Pseudomonas putida PpG7 strain.

• 한국통신학회논문지
• /
• 제29권1C호
• /
• pp.59-64
• /
• 2004

본 논문에서는 광 기록 저장 시스템을 위한, 천이가 발생되는 최소 및 최대 런-길이 조건이 각각 2와 7이고 RMTR(repeated minimum transition run)을 4로 제한하는 새로운 패리티 보존형 런-길이 제한 (parity preserving run-length limited) 코드를 제안한다. 제안된 코드는 차세대 광 기록 시스템으로 주목받고 있는 (1,7) PP 코드나 현재 저장 시스템에 적용되고 있는 (2,10) 코드에 비해 밀도율과 RMTR, DC 성분 억제, 비트 에러율(BER), 시스템 복잡도 등의 측면에서 더 나은 성능을 보인다 . 본 논문은 몇 가지 모의실험을 통해 제안된 코드의 특성을 설명하고, 앞에서 언급된 코드와 비교하여 성능의 우위를 예시하였다.

• 화훼연구
• /
• 제19권1호
• /
• pp.15-21
• /
• 2011

안개초 절화 재배시 토양피복재료 및 피복방법에 따른 잡초 발생량 및 안개초 개화특성 등을 조사하였다. 잡초 발생량은 무피복 $146.2g{\cdot}m^{-2}$(건물중)인 반면 흑색과 녹색 폴리프로필렌 부직포 전면피복은 $4.1{\sim}4.2g{\cdot}m^{-2}$으로 거의 발생되지 않았으며, 제초 소요인원도 무피복은 27.9명/10a/년인데 반해 전면피복은 2.4명/10a/년이었다. 여름 절화작형시 개화는 무피복과 골 피복이 늦었으며, 화경장, 측지수, 절화장, 화수폭 및 화경 강도는 흑색과 녹색 부직포 전면피복이 우수하였고, 절화량은 흑색 PE필름, 녹색과 흑색 부직포 전면피복에서 많았다. 월하 후 안개초 고사주율은 흑색 부직포 골 피복처리에서 12.4%로 가장 낮았고, 녹색 부직포 피복처리가 19.0% 정도였으며, 흑색 PE 필름 전면 피복처리가 39.0%로 가장 높았다. 가을 절화작형 역시 화경장, 측지수, 절화장 및 화경 강도는 흑색과 녹색 부직포 전면피복이 우수하였고, 절화량은 녹색 부직포가 가장 많았다. 로젯트 발생률은 골피복보다 전면피복이 낮았으며, 피복재료별로는 녹색 부직포 전면피복이 가장 낮았고, 다음은 흑색 부직포, 흑색 PE 필름 전면피복이 낮았다. 따라서 안개초 절화재배시 녹색 부직포 전면 피복처리가 잡초 발생억제와 절화품질 향상 및 절화량 증가에 효과적이라고 생각된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제12회 학술발표회 논문개요집
• /
• pp.144-145
• /
• 1997