• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.567-577
• /
• 2016

The hutches which are installed in the beamline are largely classified into two, i.e XPP (X-ray pump probe) and CXI (Coherent X-ray image). Laser room is installed on the hutch and provides laser to XPP and CXI simultaneously. And two hutches have heavy crane to install some optics equipments. Safety and reliability of hutch structures should be taken into account for the precise operating of the laser facilities, so vibration analysis is essential to do this. The main purpose of vibration analysis is to install hutch structures with large stiffness. We have changed materials specification several times to install hutch structures having strong stiffness. Now hutch structures were installed and checked vibration status at laser room and XPP hutch. The results of laser table and robot arm satisfy vibration criteria. This paper explains about the design and vibration analysis of hutch structures.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1656-1658
• /
• 2003

고전압 대전류 시스템에 사용하는 스위치의 기본 요구조건은 저가, 긴 수명, 적은 지터와 대용량 그리고 seal-off 형태로 쉽게 설치하여 운전하는 것이다. 본 논문은 고전압 대전류용 Seal-off TVS (Triggered Vacuum Switch)를 개발하는 것을 목적으로 하고있다. 제작한 TVS는 양전극과 음전극이 교대로 고정된 간격으로 각각 3개의 전극으로 배열되어 있으며 전극은 사다리꼴 모양으로 되어있고 트리거 시스템과 개스를 흡수하는 게터가 내부에 설치되어 있다. 제작한 스위치 내부는 약 $10^{-7}$ torr의 진공상태를 유지하고 있으며 세라믹 챔버를 사용하여 Seal-off 상태로 설계, 제작하였다. TVS의 에너지 최고 전달량은 74 C 이며 30 kV, 100 kA, $1{\sim}2$ ms의 스위치를 제작하여 시험을 하였다. 스위치 시험 장치는 200 ${\mu}F$, 22 kV 6개를 병렬로 연결한 커패시터 뱅크와 160 ${\mu}H$의 인덕터와 0.2 ${\Omega}$의 저항을 이용하여 시험 장치를 구성하였다. 본 논문은 제작한 스위치의 전기적인 특성 시험한 결과에 대하여 논하고자 한다.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.1-6
• /
• 2023

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250℃.

• Journal of Powder Materials
• /
• v.31 no.3
• /
• pp.243-254
• /
• 2024

High-entropy alloys (HEAs) have been reported to have better properties than conventional materials; however, they are more expensive due to the high cost of their main components. Therefore, research is needed to reduce manufacturing costs. In this study, CoCrFeMnNi HEAs were prepared using metal injection molding (MIM), which is a powder metallurgy process that involves less material waste than machining process. Although the MIM-processed samples were in the face-centered cubic (FCC) phase, porosity remained after sintering at 1200℃, 1250℃, and 1275℃. In this study, the hot isostatic pressing (HIP) process, which considers both temperature (1150℃) and pressure (150 MPa), was adopted to improve the quality of the MIM samples. Although the hardness of the HIP-treated samples decreased slightly and the Mn composition was significantly reduced, the process effectively eliminated many pores that remained after the 1275℃ MIM process. The HIP process can improve the quality of the alloy.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1859-1861
• /
• 2002

This paper attempts to discuss the pseudo-spark which is developed for high voltage and high current. The pseudo-spark switch is on the basic of the Paschen's law. The pseudo-spark switch fabricates the glass chamber. The pseudo-spark switch consists of hollow cathode, hollow anode, and trigger. The pseudo-spark switch is operated at the voltage of 20 kV and the pressure range of $20{\sim}80$ mtorr with He-gas. The switching current of the pseudo-spark switch was measured as 65 kA, and the duration of the pulse was about 100 ${\mu}s$. This paper describes the results of tests and the characteristics of the switch.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1295-1296
• /
• 2012

• Polymer Science and Technology
• /
• v.26 no.4
• /
• pp.290-298
• /
• 2015

• Proceedings of the KOSOMBE Conference
• /
• v.1990 no.11
• /
• pp.68-70
• /
• 1990

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.102.1-102
• /
• 2001

In this work, extensions to partial least squares (PLS) for wastewater treatment (WWT) process monitoring are discussed. Conventional data gathered by monitoring WWT systems are usually time varying, high dimensional, correlated and nonlinear, PLS has been shown to be an efficient approach in modeling and monitoring high dimensional and correlated data. To represent dynamic and nonlinear features of the data several kinds of dynamic nonlinear PLS (DNLPLS) models have been proposed. However, the complexity and ambiguity of the models make them unsuitable for WWT monitoring, Recently, dynamic fuzzy PLS (DFPLS) was proposed ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.69.2-69
• /
• 2002

Process measurements contain random and gross errors and the size estimation of gross errors is required for production accounting. Mixed integer programming technique had been applied to identify and estimate the gross errors simultaneously. However, the compensate model based on mixed integer programming used all measured variables or spanning tree as gross error candidates. This makes gross error estimation problem combinatorial or computationally expensive. Mixed integer programming with test statistics is proposed for computationally inexpensive gross error identification /estimation. The gross error candidates are identified by measurement test and the set of gross error candidates are...