• The Southeast Asian review
• /
• v.27 no.1
• /
• pp.1-52
• /
• 2017

This study aims to compare the state building process focusing on the founding presidents of South Korea, which was a colony of the defeated state of World War II and the Philippines, the colony of the victorious state. To this end, it compares the lives of the presidents, mainly the founding president of Korea Syngman Rhee and Manuel Quezon who led the autonomy of the Philippines and established the Commonwealth government, in the contexts of the state building process of the two countries. In each country, the leaders had to address the core tasks for founding the states in common. Firstly, after the independence or the acquisition of state autonomy, both countries adopted a constitution based on the presidential system with the strong authority of the presidents influenced by the United States. Secondly, the two countries after the independence were operated on the basis of anti-communism at the forefront of the Cold War. In addition, they also carried out land reform to bring the peasants into the system for supporting anti-communism. Lastly, the two countries also faced the same issues of liquidating the Japanese colonial legacies. Therefore the study examines the establishment of the constitution, settlement of anti-communism line, the land reform issues, and liquidation of Japanese colonialism or occupation in each country. The Philippines attained 'constitutional independence' in 1935 and experienced political development faster than any other post-colonial country in Asia. However, except for the establishment of the constitution, the early leaders were not able to address the principal issues for state building. As land reform failed, landowners became economically and politically dominant. The Philippines, where the modern citizen class has not arisen suffered from the political and economic recession. In Korea, despite the Korean War and division of the country, the founding president Syngman Rhee attempted to solve the tasks. As a result, he was able to lay the track of liberal democracy against communism and also settled Japanese colonial legacy as much as it was allowed. In particular, through land reform, he has laid the basis for the nation-state and economic development and has set up the girders of Korean economy by adopting the market economy system. Although there are merits and demerits, compared with the leaders of other countries especially with the Philippines, it is no doubt that Syngman Rhee has played an essential role in establishing the state as a founding president.

• Journal of Korean Elementary Science Education
• /
• v.40 no.2
• /
• pp.239-252
• /
• 2021

The purpose of this study is to develop an evolutionary STEAM education program based on the brain and to analyze its effects on scientific interest and scientific creativity of elementary school students. Four different topics based on four scientific fields (Physics, Chemistry, Biology and Earth Science) were derived from the science textbook under the 2015 revised curriculum to build a brain-based evolutionary STEAM education program. The research subjects were 90 fourth graders of S-elementary school located in Gyeonggi Province, Korea and they were divided into an experimental group of 45 students and a comparative group of 45 students. The main findings of this study are as follows. First, according to the independent samples t-test of scientific interest, no statistically significant difference were found between the two groups, but the brain-based evolutionary STEAM education had meaningful effect on improving 'interest in scientific learning' and 'anxiety about scientific learning'. Second, according to the paired samples t-test of scientific interest, the experimental group had significantly improved 'interest in science' but on the other hand, there was no effect on the comparative group. Third, scientific creativity and originality of the experimental group were significantly higher after the class than that of the comparative group. Fourth, although there were some significant differences between the two groups in scientific creativity after the class, both groups had improved scientific creativity between the results of pre and post test. Based on these results, we discuss implications for science education and STEAM education research.

• Korean Journal of Psychosomatic Medicine
• /
• v.29 no.1
• /
• pp.26-33
• /
• 2021

Objectives : This study was designed to investigate datas related to panic attack and treatment in emergency room of panic disorder patients who visited emergency room for panic attack. Methods : A retrospective analysis of medical records was conducted on 92 patients with panic disorder who visited Chungju Konkuk university hospital emergency department due to panic attack and had bodily symptoms from 1st January 2010 to 31th December 2019. In addition to demographic characteristics and comorbid disorders, triggering stressors and alcohol consumption were corrected as pre-panic attack datas, bodily symptoms at the time of panic attack were corrected as datas during attack, electrocardiogram trial, consultation with psychiatrist, admission and information of used psychotropic drugs were corrected as post-attack data. Depending on size of data, Chi-square test or Fisher's exact test was used. Collected data was analyzed using R 4.03. Results : Cardiovascular disease was accompanied by 5.4% and depressive disorder was the most common coexisting mental disorder. Among triggering stressors, economic problem/work-related stress was significantly higher in men than women (𝛘²=4.322, p<0.005). The most common physical symptom during attack was circulatory (65.2%), followed by respiratory (57.6%), numbness-paralysis (33.7%), dizziness (19.6%), gastro-intestinal (14.1%) and autonomic symptom (12.0%). Electrocardiogram was taken at higher rate when patients complained circulatory symptom (𝛘²=8.46, p<0.005). The psychotropic drug most commonly used in emergency room was lorazepam, used in 92.1%. Conclusions : The most common bodily symptom during panic attack was circulatory symptom and the most common triggering stressor in men was economic problem/work-related stress. The most commonly used psychotropic for panic attack was lorazepam.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.129-149
• /
• 2021

Recently, interest in social robots that can socially interact with humans is increasing. Thanks to the development of ICT technology, social robots have become easier to provide personalized services and emotional connection to individuals, and the role of social robots is drawing attention as a means to solve modern social problems and the resulting decline in the quality of individual lives. Along with the interest in social robots, the spread of social robots is also increasing significantly. Many companies are introducing robot products to the market to target various target markets, but so far there is no clear trend leading the market. Accordingly, there are more and more attempts to differentiate robots through the design of social robots. In particular, anthropomorphism has been studied importantly in social robot design, and many approaches have been attempted to anthropomorphize social robots to produce positive effects. However, there is a lack of research that systematically describes the mechanism by which anthropomorphism for social robots is formed. Most of the existing studies have focused on verifying the positive effects of the anthropomorphism of social robots on consumers. In addition, the formation of anthropomorphism of social robots may vary depending on the individual's motivation or temperament, but there are not many studies examining this. A vague understanding of anthropomorphism makes it difficult to derive design optimal points for shaping the anthropomorphism of social robots. The purpose of this study is to verify the mechanism by which the anthropomorphism of social robots is formed. This study confirmed the effect of the human-likeness of social robots(Within-subjects) and the construal level of consumers(Between-subjects) on the formation of anthropomorphism through an experimental study of 3×2 mixed design. Research hypotheses on the mechanism by which anthropomorphism is formed were presented, and the hypotheses were verified by analyzing data from a sample of 206 people. The first hypothesis in this study is that the higher the human-likeness of the robot, the higher the level of anthropomorphism for the robot. Hypothesis 1 was supported by a one-way repeated measures ANOVA and a post hoc test. The second hypothesis in this study is that depending on the construal level of consumers, the effect of human-likeness on the level of anthropomorphism will be different. First, this study predicts that the difference in the level of anthropomorphism as human-likeness increases will be greater under high construal condition than under low construal condition.Second, If the robot has no human-likeness, there will be no difference in the level of anthropomorphism according to the construal level. Thirdly,If the robot has low human-likeness, the low construal level condition will make the robot more anthropomorphic than the high construal level condition. Finally, If the robot has high human-likeness, the high construal levelcondition will make the robot more anthropomorphic than the low construal level condition. We performed two-way repeated measures ANOVA to test these hypotheses, and confirmed that the interaction effect of human-likeness and construal level was significant. Further analysis to specifically confirm interaction effect has also provided results in support of our hypotheses. The analysis shows that the human-likeness of the robot increases the level of anthropomorphism of social robots, and the effect of human-likeness on anthropomorphism varies depending on the construal level of consumers. This study has implications in that it explains the mechanism by which anthropomorphism is formed by considering the human-likeness, which is the design attribute of social robots, and the construal level of consumers, which is the way of thinking of individuals. We expect to use the findings of this study as the basis for design optimization for the formation of anthropomorphism in social robots.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.331-338
• /
• 2020

This study was conducted to cultivate new Lepista nuda varieties with shorter cultivation period and better fruiting body compared to that of wild strains, for mass production and commercial application. Eighteen genetic resources of L. nuda were collected and grown in boxes using rice straw-fermented growth medium. Four lines with fruiting bodies were formed and selected as cross-breeding lines. Although 657 combinations were crossed through monospore crossing, only 17 combinations were bred between the 'CBMLN-19' line and the 'CBMLN-30' line. Among them, 8 lines with fast mycelial growth and high density were selected. After inoculating the rice straw-fermented growth medium with 14 genetic resources and 8 cross-breeding lines, their incubation period was investigated. Six of the cross-breeding lines completed their incubation in 20 days, while 7 of the 14 genetic resources took more than 40 days to complete their incubation, reducing the incubation period by more than 20 days in most cross-breeding lines. After the incubations were completed, the clay loam soil was covered with for post-cultivation, and when the mycelial cultivation was complete, the formation of fruiting bodies was induced after scraping the mycelial bodies under these environmental conditions: 14℃, 95% relative humidity or higher, and 1,500 to 2,000 ppm CO2 concentration. The temperature was reduced to 6℃ at night, resulting in a low temperature shock. Thus, 4 lines of fruiting bodies occurred from two genetic resources 'CBMLN-31' and 'CBMLN-44' and two cross-bred lines 'CBMLN-96' and 'CBMLN-103'. After inoculation, the longest period for fruiting bodies to occur was 100 days for the control:, the genetic resource 'CBMLN-31', and the shortest period (45 days) was observed for the cross-breeding line 'CBMLN-103'. The result of the investigation of the fruiting body characteristics shows that the cross-bred line 'CBMLN-103' showed a small form with 1.9 g of individual weight and 123validstipes per box, which was the highest incidence among the four lines. Another cross-bred line, 'CBMLN-96', had an individual weight of 5.5 g, which is larger than that of 'CBMLN-103'; however, the number of valid stipes per box was 30 less than that of 'CBMLN-103'. Quantity analysis showed that the control, 'CBMLN-31', had the highest quantity of 783 g per box, followed by the cross-bred line, 'CBMLN-96' with 165 g per box, and then the 'CBMLN-103' with 232 g. The quantity of the two crossbred lines was lower than that of the control 'CBMLN-31'; however, the amount of fruiting bodies was higher, and the cultivation period was shortened by 32 to 33 days. Therefore, these two lines would be selected as superior lines.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.135-142
• /
• 2022

Purpose. This study aims to evaluate the combined effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns. Materials and methods. Seven nickel-chromium dies were generated from a 3D model of mandibular first molar using the digital scanner with the following geometries: 1.5 mm occlusal reduction, 1.0 mm deep chamfer. Based on the abutment model, Zirconia blocks (Luxen Zirconia) were selected to fabricate Sixty-three zirconia crowns with occlusal thicknesses of 0.3 mm, 0.5 mm, and 1.5 mm, and different axial thicknesses of 0.3 mm, 0.5 mm, and 1.0 mm. All crowns were cemented by resin cement. Next, the crowns were subjected to load-to-fracture test until fracture using an electronic universal testing machine. In addition, fracture patterns were observed with a scanning electron microscope (SEM). Two-way ANOVA and the Tuckey HSD test for post hoc analysis were used for statistical analysis (P < .05). Results. The mean values of fracture resistancerecorded was higher than the average biting force in the posterior region. The two-way ANOVA showed that the occlusal and axial thickness affected the fracture resistance significantly (P < .05). However, the effect of axial thickness on fracture resistance did not show a statistical difference when thicker than 0.5 mm. The observed failure modes were partial or complete fracture depending on the severity of crack propagation. Conclusion. Within the limitations of the present study, the CAD-CAM monolithic zirconia crown with extremely reduced thickness showed adequate fracture resistance to withstand occlusal load in molar regions. In addition, both occlusal and axial thickness affected the fracture resistance of the zirconia crown and showed different results as combined.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.139-148
• /
• 2021

This study aimed to verify how a multisensory storytelling-based activity-based intervention affects social interaction in children with cerebral palsy. As a quasi-experimental investigation, this study used a single-blind, two-group pre-post test design. This study comprised 24 children aged 7 to 8 y who had been diagnosed with spastic cerebral palsy and were classified as having GMFCS stages I to III. Twelve children were randomly assigned to experimental and control groups, with neither the children nor their guardians knowing which group they were placed in. The group program comprised 16 sessions of 60 min each, twice a week for eight weeks. The experimental group engaged in an activity-centered intervention centered on multisensory storytelling, whereas the control group engaged in structured physical activity. The activities were assessed using the peer relations skills scale to determine the extent to which social interaction had changed prior to and during the child's intervention. The SPSS 25.0 for Windows (IBM Corp, USA) application was used to analyze the data, and the significance level (α) for statistical verification was set to 0.05. Furthermore, the Wilcoxon Signed-Rank and Mann-Whitney U tests were used to assess the differences in social interaction between the experimental and control groups. Significant differences were observed in the total of the peer relationship skill scale and cooperation and empathy areas of the subtest in the intragroup change of the peer relationship skill scale between the experimental and control groups. However, the experimental group demonstrated a significant difference in the initiative area, whereas the control group demonstrated no significant difference. A significant difference was observed in the amount of change between the two groups in the initiative area and total of the subtest of peer relationship skills but no significant difference in the collaboration and empathy areas. We gave a multisensory storytelling-based activity-based intervention based on multisensory storytelling to children with cerebral palsy and saw a significant improvement in peer relationship skills. It may be proposed as an effective intervention strategy for children with cerebral palsy who struggle with social contact.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.231-238
• /
• 2022

Purpose. This study aimed to investigate the effect of different veneering methods on the tensile bond strength between polyetherketoneketone (PEKK) and denture base resins. Materials and methods. A total of 80 PEKK T-shaped specimens were fabricated and the primer (Visio.link) was applied after airborne-particle abrasion with 110 ㎛ alumina oxide powder. According to the veneering method, the specimens were divided into four groups (n = 20) to be veneered with the gingival colored packable photopolymerized composite resin (SR Adoro); flowable photopolymerized composite resin, (Crea.lign); heat-polymerized resin (Vertex); and self-polymerized resin (ProBase Cold). Each group was divided into two subgroups (n = 10) according to the artificial thermal aging. After the tensile bond strength measurement via universal testing machine, the fracture sections of all specimens were observed. Two-way ANOVA and Tukey's HSD post hoc test were used for the statistical analysis (α = .05). Results. The results of the two-way ANOVA showed statistically significant differences in the tensile bond strength according to the veneering method and artificial thermal aging of denture base resins (P<.001). The highest tensile bond strength showed in the packable photopolymerized resin group before and after the artificial thermal aging. The lowest tensile bond strength showed in the heat-polymerized resin group. The mixed and adhesive fracture showed in all groups. Conclusion. The veneering method and artificial thermal aging can influence in the tensile bond strength between the resin and PEKK. The artificial thermal aging can reduce the tensile bond strength.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.4
• /
• pp.334-340
• /
• 2021

Purpose: This study analyzed the bone mineral densities of the lumbar vertebrae and femurs of patients with ankle fractures to determine the correlation between ankle fractures and osteoporosis. Materials and Methods: From April 2002 to July 2014, one hundred consecutive ankle fracture patients with bone mineral density tests performed within post-traumatic one year were enrolled. The patients were divided into three age groups according to their age at the time of injury (group 1: <50, group 2: 50-69, group 3: ≥70). The types of ankle fractures were classified into unimalleolar, bimalleolar and trimalleolar fractures. The bone mineral density was analyzed using the T score, Z score, absolute value (g/cm²) of the lumbar spine (L1-L4), femur neck, femur intertrochanter, and total femur. Results: There were 3.2 times more females with ankle fractures than males, and the prevalence of osteoporosis according to age group was 0% in the group under 50 years, 24.2% in the 50 to 69-year-old group, and 15% in the group over 70 years. Osteoporosis was found in 30% of patients with a trimalleolar fracture in the 50 to 69-year-old group. In all patient groups, a lower age indicated a higher frequency of unimalleolar fractures. The relationship between the bone mineral density and the type of fracture is that the frequency of trimalleolar fracture increased with decreasing T score of the lumbar vertebrae and the absolute value of bone mineral density (g/cm²) and the Z score of the femur neck, but there were no other indicators. Conclusion: Among the 100 patients with ankle fractures, females were more common than males, because osteoporosis was less severe in males. The incidence of unimalleolar fracture was higher than that of trimalleolar fracture. On the other hand, the correlation between the ankle fractures and the bone mineral density of the femur and lumbar spine was not significant.

• Journal of Environmental Impact Assessment
• /
• v.31 no.3
• /
• pp.141-160
• /
• 2022

The harbor construction projects can lead to various marine environmental problems including habitat degradation and loss, marine water pollution, change of flow patterns, erosion, scour, sedimentation, and so on. The EIA is a measure to prevent various environmental problems in advance from examining and minimizing the environmental impacts before the proposed developments are implemented. In addition, institutions reviewing EIA reports have made efforts to conduct scientific and standardized EIA by applying EIA guidelines for each project. This study aims to create a EIA guideline focusing on the harbor construction projects. Based on the review comments of the harbor construction EIA reports for the past 13 years (2009-2021) and the EIA guidelines of different types of projects, we identified the marine environmental problems and provided the appropriate guideline. This guideline summarizes and presents the contents which must be reviewed in the baseline condition survey, impact assessment, mitigation, and post-environmental impact investigation in the fields of marine fauna and flora, marine physics, and marine water and sediment quality. In the case of a baseline condition survey of marine fauna and flora, a method for selecting survey points considering the characteristics of sea area and project was presented. When estimating the impact of marine fauna and flora, we presented methods for predicting the impact on them due to the spread of suspended sediments and the damage to benthic habitats due to dredging and reclamation. In consideration of the characteristics of the sea area, we divided the survey items of the marine physics into essential items and supplementary items. In predicting the impact of marine physics, various methods for major issues such as seawater circulation, suspended sediment and bottom sediment transport, water temperature and salinity diffusion, seawater exchange, wave transformation, harbor tranquility, and shoreline change were presented. The research results will contribute to protect the marine environment by inducing more systematic and scientific surveys, impact assessments, and mitigation in the EIA process.