• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.364-373
• /
• 2017

The goal of this study was to examine the relation of perceiving a calling and life satisfaction, and to verify the mediating effects of living a calling and flow in the process of perceiving a calling influencing according to the level of life satisfaction, as well as the moderating effect of self-efficacy in a pool of adult professionals. The study data were collected from a survey conducted from June to July, 2016, on 185 people working in Seoul and the metropolitan area. The following are the study hypotheses. First, perceiving a calling will influence life satisfaction. Second, living a calling will mediate the relationship between perceiving a calling and life satisfaction. Third, flow will mediate the relationship between living a calling and life satisfaction. Fourth, self-efficacy will moderate the relationship between living a calling and flow. In accordance with previous research, a structural equation model(SEM) was used to examine the hypotheses. As a result, the first research model was selected and the hypotheses were supported. With the results of this study as the foundation, this research paper proposed directions for future study.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.1
• /
• pp.83-114
• /
• 2015

This study proposed to derive important aspects of developing a policy information mentoring service by analyzing the consumers' needs. To do this, we conducted a survey targeting civil servants in policy-related ministries, researchers at policy research institutes, and policy information service representatives, who will all participate in the policy information mentoring service. The results are as follows. First, the need for a policy information mentoring service the desire to participate was very high. Second, the policy information mentoring service requirements that must be considered during development were, by order of importance, the expertise of the policy information service, quantitative and qualitative improvement, and policy information sources. Requirements for a successful policy information mentoring service were to sign an agreement with organizations to participate in the service, and to then enable partner organizations to recommend their staff to act as mentors and mentees. Conditions required on the operator side of the service were securing a pool of mentors and mentees, training for both groups, financial support cooperation guarantee from the affiliated organizations for professional mentoring activities, and links to policy areas in related institution.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.9-15
• /
• 2009

In this study, the l/35 reduced-scale model experiment were conducted to investigate designed ventilation system performance at rescue station in tunnel fire. A model tunnel with 2 mm thick of steel, 10 m long, 0.19 m high and 0.26m was made by using Froude number scaling law. The cross-passages installing escape door at the center. were connected between accident tunnel and rescue tunnel. The n-heptane pool fire, $4cm\times4cm$, with heat release rate 698.97W were used as fire source. The fire source was located in the center and portal of accident tunnel as Worst case.. An operating ventilation system extracted smoke amount of 0.015 cms. The smoke temperature and carbon monoxide. concentration in cross-passage were measured to verify designed ventilation system. The results showed that, in center fire case without ventilation in accident tunnel, smoke did not propagated to rescue station. In portal tire case, smoke spreaded to rescue station without ventilation. But smoke did not propagated to rescue station with designed ventilation.

• Nuclear Engineering and Technology
• /
• v.13 no.4
• /
• pp.264-276
• /
• 1981

A simulation procedure which can represent time-dependent nuclear characteristics of TRIGA Mark-III reactor is developed. CITATION, a multi-group diffusion-depletion program, has been utilized as calculational tool. The group structure employed in this study consists of 7 groups: -3-fast and 4-thermal-which is conventionally utilized in TRIGA type reactor analysis. Three-dimensional nuclear characteristics are synthesized by combining results from two-dimensional plane calculation and two-dimensional cylinder calculation, since direct three-dimensional approach is not yet possible. An effort ia made to develope a method which can extract effective zone and group dependent bucklings by neutron diffusion theory rather than conventional zone and/or group independent Ducklings by neutron transport theory, since neutron leakage is quite high for small core such as research reactors. It is turned out that the method developed in this study gives satisfactory results. The calculation is performed under assumptions that all control rods are fully withdrawn, that no samples are inserted in the irradiation holes and that the core is located in the center of the reactor pool. Burnup-dependent variation of core excess reactivity, time dependent change of Xe-135 poisoning and reactivity worth of rotary specimen rack are calculated and compared with operation records. Neutron flux and power distribution as well as neutron spectrum in each irradiation .facility are presented.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.193-198
• /
• 2002

In 1his paper, applicability of laser welding to joining process of single crystal nickel base superalloy turbine blades was investigated. Because heat input of laser welding is more precisely controlled 1han TIG welding, it is possible to optimize solidification microstructure of the welds. Since in single crystal nickel base superalloy the crystal orientation have a significant effect on the strength, it is important to control the solidification microstructure in the fusion zone. A single crystal nickel base supera1loy, CMSX-4, plates were bead-on welded and butt welded using a $CO_2$ laser. The effects of microstructure and crystal orientation on properties of the weld joints were investigated. In bead-on weldling, welding directions were deviated from the base metal [100] direction by 0, 5, 15 and 30 degrees. The welds with deviation angles of 15 and 30 degrees showed fusion zone transverse cracks. As the deviation angles became larger, the fusion zone had more cracking. In the cross section microstructure, the fusion zone grains in 0 and 5 degrees welds grew epitaxially from the base metal spins except for the bead neck regions. The grains in the bead neck regions contained stray crystals. As deviation angles increased, number of the stray crystals increased. In butt welding, the declinations of the crystal orientation of the two base metals varied 0, 5 and 10 degrees. All beads had no cracks. In the 5 degrees bead, the cross section and surface microstructures showed that the fusion zone grains grew epitaxially from the base metal grains. However, the 10 degrees bead, the bead cross section and surface contained the stray crystals in the center of the welds. Orientations of the stray crystals accorded with the heat flow directions in the weld pool. When the welding direction was deviated from the base metal [100] direction, cracks appeared in the area including the stray crystals. The cracks developed along the grain boundaries of the stray crystals with high angles in the final solidification regions at the center of the welds. The fracture surfaces were covered with liquid film. The cracks, therefore, found to be solidification cracks due to the presence of low melting eutectic. As the results, in both bead-on welding and butt welding the deviation angles should be control within 5 degrees for preventing the fusion zone cracks. To investigate the mechanical properties of the weld joints, high temperature tensile tests for bead-on welds with deviation angles of 0 and 5 degrees and the butt welds with dec1ination angles of 0, 5 and 10 degrees were conducted at 1123K. The the tensile strength of all weld joints were more 1han 800MPa that is almost 80% of the tensile strength of the base metal. The strength of the laser weld joints were more than twice that of tue TIG weld joints with a filler metal of Inconel 625. The results reveals 1hat laser welding is more effective joining process for single crystal nickelbase superalloy turbine blades 1han TIG welding.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.612-619
• /
• 2002

The dynamic behavior of Al-Mg alloys plasma was very unstable and this instability was closely related to the unstable motion of keyhole during laser irradiation. The keyhole fluctuated both in size and shape and its fluctuation period was about 440 ${\mu}{\textrm}{m}$. This instability has been estimated to be caused by the evaporation phenomena of metals with different boiling point and latent heats of vaporization. Therefore, the authors have conducted the spectroscopic diagnostics of plasma induced in the pulsed YAG laser welding of Al-Mg alloys in air and argon atmospheres. In the air environment, the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn, and singly ionized Mg line, as well as strong molecular spectrum of AlO, MgO and AIH. It was confirmed that the resonant lines of Al and Mg were strongly self-absorbed, in particular in the vicinity of pool surface. The self-absorption of atomic Mg line was more eminent in alloys containing higher Mg. These facts showed that the laser-induced plasma was relatively a low temperature and high density metallic vapor. The intensities of molecular spectra of AlO and MgO were different each other depending on the power density of laser beam. Under the low power density irradiation condition, the MgO band spectra were predominant in intensity, while the AlO spectra became much stronger in higher power density. In argon atmosphere the band spectra of MgO and AlO completely vanished, but AlH molecular spectra was detected clearly. The hydrogen source was presumably the hydrogen solved in the base Metal, absorbed water on the surface oxide layer or H$_2$ and $H_2O$ in the shielding gas. The temporal change in spectral line intensities was quite similar to the fluctuation of keyhole. The time average plasma temperature at 1 mm high above the surface of A5083 alloy was determined by the Boltzmann plot method of atomic Cr lines of different excitation energy. The obtained electron temperature was 3, 280$\pm$150 K which was about 500 K higher than the boiling point of pure aluminum. The electron number density was determined by measuring the relative intensities of the spectra1lines of atomic and singly ionized Magnesium, and the obtained value was 1.85 x 1019 1/㎥.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.10
• /
• pp.4135-4141
• /
• 2014

Background: Human papillomaviruses (HPV) may play an important role as one of the possible etiologies of oral squamous cell carcinoma (OSCC). The present study aimed to investigate the association between HPV and OSCC in young Japanese patients by examining the presence of HPV DNA and surrogate markers in OSCC tissues. Materials and Methods: Forty young patients with OSCC whose surgical specimens were available were analyzed and compared with 40 patients randomly recruited from a pool of patients aged >40 years. HPV DNA was detected using the polymerase chain reaction-based AMPLICOR$^{(R)}$ HPV test, and surrogate markers of HPV infection were analyzed using immunohistochemical techniques to detect $p16^{INK4a}$ and p53. Results: Only two (5%) young patients and one (2.5%) older patient were positive for HPV DNA. $p16^{INK4a}$ overexpression was identified in six (15%) young patients. p53 staining levels were not high in tissues of most young patients (27 patients, 67.5%). HPV DNA status did not significantly correlate with $p16^{INK4a}$ expression levels. Profiles of increased levels of $p16^{INK4a}$ expression with diminished levels of p53 staining were not associated with the presence of HPV DNA. The combined p53 with $p16^{INK4a}$ profiles were significantly correlated with alcohol consumption in younger patients (p=0.006). Conclusions: Results of the present study indicate that HPV is less likely to cause OSCC in young Japanese patients, and the $p16^{INK4a}$ expression level is not an appropriate surrogate marker for HPV infection in OSCC.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.4071-4075
• /
• 2016

Background: FDG PET/CT is at an equivocal stage to recommend for staging of colorectal cancer as compared to contrast-enhanced CT (ceCT). This study was intended to evaluate the value of FDG PET/ceCT in colorectal cancer staging as compared to ceCT alone. Materials and Methods: PET/ceCT was performed for 61 colorectal cancer patients who were prospectively enrolled in the study. Three patients were excluded due to loss to follow-up. PET/ceCT findings and ceCT results alone were read separately. The treatment planning was then determined by tumor board consensus. The criteria for T staging were determined by the findings of ceCT. Nodal positive by PET/ceCT imaging was determined by visual analysis of FDG uptake greater than regional background blood pool activity. The diagnostic accuracy of T and N staging was determined only in patients who received surgery without any neoadjuvant treatment. Results: Of 58 patients, there were 40 with colon cancers including sigmoid cancers and 18 with rectal cancers. PET/ceCT in pre-operative staging detected bone metastasis and metastatic inguinal lymph nodes (M1a) that were undepicted on CT in 2 patients (3%), clearly defined 19 equivocal lesions on ceCT in 18 patients (31%) and excluded 6 metastatic lesions diagnosed by ceCT in 6 patients (10%). These resulted in alteration of management plan in 15 out of the 58 cases (26%) i.e. changing from chemotherapy to surgery (4), changing extent of surgery (9) and avoidance of futile surgery (2). Forty four patients underwent surgery within 45 days after PET/CT. The diagnostic accuracy for N staging with PET/ceCT and ceCT alone was 66% and 48% with false positive rates of 24% (6/25) and 76% (19/25) and false negative rates of 47% (9/19) and 21% (4/19), respectively. All of the false negative lymph nodes from PET/ceCT were less than a centimeter in size and located in peri-lesional regions. The diagnostic accuracy for T staging was 82%. The sensitivity of the peri-lesional fat stranding sign in determining T3 stage was 94% and the specificity was 54%. Conclusions: Our study suggested promising roles of PET/ceCT in initial staging of colorectal cancer with better diagnostic accuracy facilitating management planning.

• Journal of Chest Surgery
• /
• v.29 no.3
• /
• pp.255-262
• /
• 1996

The donor pool for heart transplants is severely limited and there is still a legal problem of brain death. This study assessed the function of hearts "absolute anoxic" for ten minutes after asphyxia by perfusing the hearts on a Langendorfr apparatus for 45 minutes with Krebs-Henseleit buffier at 37 t at 80 cm H2O. Forty isolated rat hearts were divided into four groups. Ten control hearts (group 1) were perfused on the circuit without intervening ischemia. Ten hearts (group 2) were harvested, quickly flushed with 5cc of cold University of Wisconsin solution, and stored in the same cold solution for 4 hours. Ten hearts (group 3) were excised, quickly flushed with 5 u of cold Stanford cardioplegic solution and stored in cold saline solution for 4 hours. Ten asphyxiated hearts (group 4) had warm ischemia for ten minutes and were perfused with 5u of cold Stanford cardioplegia containing 7,500 units of urokinase to dissolve intravascular clots, and stored in cold saline solution for 1.5 hours. Time of spontaneous defibrillation (TSD) after perfusion was significantly longer in group 2, group 3 and group 4 than in group 1. TSD in group 3 and group 4 was significantly longer in comparison to that of group 2. Left ventricular developed pressure(LVDP) at 15 minutes was significantly lower in group 3 and group 4 than in group 1 and group 2. In group 4, LVDP at 30 minutes and 45 minutes was significantly lower compared with that in group 1 . In conclusion, asphyxiated rat hear;ts which had absolute anoxia for 10 minutes after as hyxia showed relatively satisfactory cardiac function. function.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.1
• /
• pp.17-25
• /
• 2020

We present a novel multi-core CPU based parallel algorithm for the cell-connectivity information extraction algorithm, which is one of the preprocessing steps for volume rendering of unstructured grid data. We first check the synchronization issues when parallelizing the prior serial algorithm naively. Then, we propose a 3-step parallel algorithm that achieves high parallelization efficiency by removing synchronization in each step. Also, our 3-step algorithm improves the cache utilization efficiency by increasing the spatial locality for the duplicated triangle test process, which is the core operation of building cell-connectivity information. We further improve the efficiency of our parallel algorithm by employing a memory pool for each thread. To check the benefit of our approach, we implemented our method on a system consisting of two octa-core CPUs and measured the performance. As a result, our method shows continuous performance improvement as we add threads. Also, it achieves up to 82.9 times higher performance compared with the prior serial algorithm when we use thirty-two threads (sixteen physical cores). These results demonstrate the high parallelization efficiency and high cache utilization efficiency of our method. Also, it validates the suitability of our algorithm for large-scale unstructured data.