• The Research Journal of the Costume Culture
• /
• v.8 no.6
• /
• pp.822-841
• /
• 2000

The purpose of this study is to organize how the deceased are clothed. Although there are many people who have seen the dead clothed once or twice and although the clothing has been constantly going on, there have been no books or studies on how the deceased are clothed. Instead, the methods have only been handed down orally by seniors and others who are experienced in it. I see the necessity of systematizing the method of clothing the deceased so that both ordinary people as well as experts can utilize it properly to show their sincerity and courtesy towards the dead. This study is based on literature including old books, dissertations, publications, and reports on ethnic customs. It also refers from interview results of shrouds makers, those experienced in clothing the dead, and seniors knowledgeable in the trade. Funeral manifested the social status of the dead. Shrouds of the olden days had different colors, such as white, black, blue, red, etc. according to items. However, nowadays they are white, pink, or partially light blue or sometimes people just keep the colors of their original cloths. Current items do not differ much from those of the ancient times, though Kwadu, Km, and Po, which were used to cover the belly, have been relatively simplified. The form of shrouds has changed nowadays. There are differences in the funeral procedures and how the deceased are clothed. In the olden days, when a person died, the body was cleaned up and clothed the very next after death. Nowadays, the cleansing and clothing of the body and placing the body in the coffin are all done together the following day. According to the foregoing, though there are no big differences in the way the deceased are clothed between the olden days and the present, the order in which Aksu and B누 are placed, differs and the procedures, items and shape have been simplified.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1249-1253
• /
• 2005

대부분의 국내 다목적 댐은 유역면적이 넓고 강우기 집중강우로 인하여 유입되는 입자성 물질이 상당히 많은 편이며, 영양염의 증가로 인하여 저수지내부에서 발생되는 입자성 물질도 많다. 이로 인하여 호소에는 외부에서 유입된 무기$\cdot$유기성 입자와 내부 생성된 유기성 물질들이 장기간 축적되어 저수지 용량이 줄어든다. 본 연구에서는 저수지 퇴적물 상태를 탐사하는 효율적인 조사기법을 제시하고자 한다. 퇴적물 탐사기법에는 탄성파탐사 등을 이용하는 간접적인 방법과 코아를 이용하는 직접적인 방법, 퇴적층 동위원소 분석 기법 등이 있으며, 이러한 기법에 대한 기본원리 및 특성, 효용성 등을 평가하고 현장에 적합한 방법을 실제 적용하였다. 퇴적물 분포를 조사하기 위하여 먼저 다중빔(MBES)을 이용한 정밀 지형조사를 실시하였으며 이를 통하여 호저지형의 특징을 간접적으로 평가할 수 있었다. 직접적인 조사방법으로 gravity corer를 사용하여 몇 개의 지점을 sampling하였으며, 잠수부가 직접 핸드코아링를 실시하여 퇴적층을 측정하였다. 16지점에서 실시한Gravity core 결과 세 곳의 조사 정점에서 최대 70cm 두께의 퇴적층이 중력식 시추기에 의해 획득되었으며 다른 정점에서는 50cm, 20cm가 시추되었고 그 나머지 지점에서는 퇴적물이 채취되지 않았다. 이는 퇴적층이 얇아 코아가 쓰러지거나 시료채취가 되지 않은 것으로 판단되었다. 잠수부가 hand corer를 이용한 시료 채취시에 채취된 시료의 퇴적층은 각 지점별로 덕치리 25cm, 경계지점 25cm, 우산리 지점 45cm로 조사되었다. 납-210(반감기 22.3년)을 이용하여 최근에 형성된 주암댐 호수저 퇴적물 중 퇴적작용 이후 교란을 받지 않은 지역의 시추 시료를 대상으로 퇴적속도를 구하였다. 주암호에서 취한 코아퇴적물 시료는 현장에서 냉동하여 실험실에서 약 2cm 간격으로 절단하여 절단체 별로 동위원소 분석을 실시하였다. $^{210}Pb$의 농도는 grand-daughter인 $^{210}Po$를 측정함 후 감마분석에 의하여 구하였다. CF:CS 연령모델을 적용한 결과 깊이에 따른 supported $^{210}Pb$와 퇴적 속도는 0.91cm/year 인 것으로 산정 되었다.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.482-488
• /
• 2012

To fabricate a precise micro metal mold, the electrochemical etching process has been researched. We investigated the electrochemical etching process numerically and experimentally to determine the etching tendency of the process, focusing on the current density, which is a major parameter of the process. The finite element method, a kind of numerical analysis, was used to determine the current density distribution on the workpiece. Stainless steel(SS304) substrate with various sized square and circular array patterns as an anode and copper(Cu) plate as a cathode were used for the electrochemical experiments. A mixture of $H_2SO_4$, $H_3PO_4$, and DIW was used as an electrolyte. In this paper, comparison of the results from the experiment and the numerical simulation is presented, including the current density distribution and line profile from the simulation, and the etching profile and surface morphology from the experiment. Etching profile and surface morphology were characterized using a 3D-profiler and FE-SEM measurement. From a comparison of the data, it was confirmed that the current density distribution and the line profile of the simulation were similar to the surface morphology and the etching profile of the experiment, respectively. The current density is more concentrated at the vertex of the square pattern and circumference of the circular pattern. And, the depth of the etched area is proportional to the current density.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.4
• /
• pp.556-561
• /
• 2010

Tomato fruits(Lycoperisicon esculentum) synthesize the glycoalkaloids dehydrotomatine and ${\alpha}$-tomatine, possibly as defense against bacteria, fungi and insects. We developed a new effective method to prepare and purify dehydrotomatine and ${\alpha}$-tomatine that exists in tomato fruits using alumina column chromatography and high performance liquid chromatography (HPLC). The tomato glycoalkaloids(TGA) in tomato was extracted with 2% acetic acid, and then precipitated with ammonium hydroxide(pH=10.5). The dry precipitate substance was applied on alumina column, and then fractionated with water saturated n-butylalcohol. The TGA(Fr. No. 26~36) were collected and dried under reduced pressure. The TGA was performed on a reverse phase HPLC(Inertsil ODS-2, $5\;{\mu}m$), eluted with acetonitrile/20mM $KH_2PO_4$(24:76, v/v) at 208 nm. Two peaks were detected on HPLC, and individual peak was collected by repeating HPLC. Furthermore, to confirm the identity dehydrotomatine and ${\alpha}$-tomatine, each peak isolated was hydrolyzed with 1N HCl into sugar and aglycone tomatidine. The sugars were converted to trimethylsilyl ester derivatives. The nature and molar ratios of sugars were identified by gas-liquid chromatography(GLC) and the aglycone by high-performance liquid chromatography(HPLC). The first peak (Rt=17.5 min) eluted from HPLC was identified as dehydrotomatine, and second peak(Rt=21.0 min) was as ${\alpha}$-tomatine. This technique has been used effectively to prepare and isolate dehydrotomatine and ${\alpha}$-tomatine from tomato fruits.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.3
• /
• pp.4184-4194
• /
• 1976

Located in the southwestern part of Korea, the Yong San Gang river flows generally northeast to southwest, and because of the specific location, topography and climate, the basin area is subject to recurrent drought and flood damages. To eliminate the cause of such damages and ensure an increase in the farm income by means of effective irrigation supply and increased cropping intensity, efforts are being made to speed up implementation of an integrated agricultural development project which would include construction. of an estuary dam and irrigation facilities as well as land development and tidal reclarnation. In formulating a basin development project plan, it is necessary to study a series of long-term runoff data. The catchment area at the proposed estuary damsite is 3,471$\textrm{km}^2$ with the total length of the river channel up to this point reaching 138km. An analysis of runoff in this area was carried out. Rainfall was estimated by the Thiessen Network based on records available from 15 of the rainfall observation stations within the area. Out of the 15 stations, Kwang Ju and Mok Po stations were keeping long-term precipitation records exceeding some 60 years while the others were in possession of only 5-10 years records. The long-term records kept by those stations located in the center of the basin were used as base records and records kept by the remaining stations were supplemented using the coefficient of correlation between the records kept by the base stations and the remainder. The analyses indicate that the average annual rainfall measured at Kwang Ju during 1940-1972 (33 years) amounts to 1,262mm and the areal rainfall amounts to 1,236mm. For the purpose of runoff analysis, 7 observatories, were set up in the middle and lower reaches of the river and periodic measurements made by these stations permitted analysis of water levels and river flows. In particular, the long-term data available from Na Ju station significantly contributed to the analysis. The analysis, made by 4-stage Tank method, shows that the average annual runoff during 1940-1972 amounts to 2,189 million ㎥ at the runoff rate of 51%. As for the amount of monthly runoff, the maximum is 484.2 million ㎥ in July while the minimum is 48.3 million ㎥ in January.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.4
• /
• pp.223-233
• /
• 2009

It has been considered that fishing areas for shrimp beam trawl have been in ruin because Korean local governments have permitted trawling into the areas limited by the fisheries local regulations from 1994. Physical and biological effects of the trawling were investigated in the study. Physical effects were investigated by optical methods such as trawling tracking by side scan sonar and comparing the gear both before and after trawling. Biological aspects were investigated by grab sampling of benthic animals, concentration of trace metals in sediment and a flux evaluation of ${NH_4}^+,\;{PO_4}^-,\;and\;SiO_2$ by coring. The fishing activity had physical impacts on the seabed but these recovered naturally in less than fourty days naturally, which increased the benthic biodiversity, increases the trace metal concentration of and nutrient flux into the seawater, especially phosphate and silicate. This method and these results can help in further studies looking for disturbances by fishing.

• The Korean Journal of Pain
• /
• v.11 no.1
• /
• pp.54-59
• /
• 1998

Background: Tramadol administered epidurally is known to have one-thirtieth the potency of morphine for treatment of pain following abdominal surgery. We designed a prospective, randomized, controlled study to evaluate the analgesic efficacy and safety of combined epidural infusion of bupivacaine and tramadol with 2-day infusor as ompared to bupivacaine and morphine combined epidural infusion. Methods: Sixty healthy women scheduled for Cesarean delivery were assigned randomly in double- blind fashion: Group 1 (n=20) were given a mixture of morphine 10 mg(1 ml), 0.5% bupivacaine 40 ml and normal saline(NS) 40 ml; Group 2(n=20) a mixture of tramadol 300 mg(6 ml), 0.5% bupivacaine 40 ml and NS 54 ml; Group 3(n=20) or a mixture of tramadol 500 mg(10 ml), 0.5% bupivacaine 50 ml and NS 50 ml, of continuous dose via epidural route following 1% lidocaine 6 ml as bolus dose for 48 hours postoperatively. We evaluated the analgesic efficacy and side effects of these three groups using visual analogue pain scale (VAPS) and verbal rating scale (VRS). Results: VAPS of group 1 and 3 were lower than group 2, and VAPS of group 1 was lower than group 3(12, 24, 36, 48 hours). VRS of group 1 and 3 were lower than group 2 (12, 24, 36 hours). There were incidences of pruritus was 16 patients in group 1. Conclusions: Tramadol does possess the analgesia effect of morphine, but has the added analgesia following increment. Further research to determine the most effective administration method and reguired dosage of tramadol is further needed.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.2
• /
• pp.102-106
• /
• 2005

Objective : The purposes of this study are to evaluate the efficacy of en bloc open-door laminoplasty and to investigate the validity of various factors as prognotic indicators in patients with multisegmental spondylotic myelopathy and ossification of posterior longitudinal ligament[OPLL]. Methods : The authors reviewed 43 cases in whom laminoplasty were performed for cervical myelopathy between January 2000 and December 2002. Clinical symptoms and results were evaluated using the Japanese Orthopaedic Association[JOA] scale. The recovery rate was calculated and then assessed for prognostic factors such as preoperative JOA scores, ages, history of previous trauma, duration of symptoms and signal change in cord on T2-weighted magnetic resonance Image. Results : In cervical stenosis, canal widening of antero-posterior diameter and dimension after laminoplasty is 4.16mm, $87.43mm^2$ and in OPLL is 6.20mm, $117.61mm^2$. In all cases there wasn't neurologic deterioration, mild postoperative complications developed in seven cases. Four patient had a limitation of range of neck motion and the other one showed kyphotic change and another two showed C5 radiculopathy. The recovery rate of JOA score in cervical stenosis and OPLL was 62% and 68% respectively. Duration of symptoms, the severity[preoperative JOA score], and signal change in cord on T2-weighted magnetic resonance image had close relationship to the clinical outcomes. Conclusion : Unilateral en bloc laminoplasty is simultaneous expansile and decompressive method. And preoperative JOA score, symptom duration and high signal intensity on T2-weighted magnetic resonance image can be used to predict prognosis.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.381-387
• /
• 2004

Recently developed Plasma Display Panels (PDP) require phosphors of high luminance at Vacuum Ultraviolet (VUV) excitation. The present investigation developed new PDP phosphors using combinatorial chemistry method. We applied T $b^{3+}$ -activated yttrium gadolinium phosphates system to our combinatorial fine-tuning technique. As a result, the optimum composition was determined to be (G $d_{0.74}$ $Y_{0.11}$T $b_{0.15}$) $P_{1.15}$ $O_{\delta}$ through the two-step combinatorial screening process including excess phosphorous and Gd replacement. We found that the sample of the optimum composition shows a higher luminescence efficiency at VUV excitation and a shorter decay time than the commercially available Z $n_2$ $SiO_4$:Mn phosphor.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.1
• /
• pp.73-83
• /
• 1992

Now composite resin restoration is clinically accepted in the repair of fractured PFM case, many mechanical surface treatment methods are performed to increase retentive force. The main purpose of this study was to compare the retentive force among the possible surface treatments and to insure the best method for the clinical application to the fractures porecelain and the exposed metal surface. To compare and to analyze the retentive force of repair resin, porcelain specimen were divided into 2 groups, etching group and non-etching group, and etching group were treated with 37% $H_3PO_4$, 1.23% APF, 10% HF and non-etching groups were treated with diamond bur, micro-sandblasasting. Also, metal specimens were divided by 2 groups : one was non-precious metal group which was treated with diamond bur, micro-sandblasting and tin plating and electrolytic etching, the other was precious metal group which was composed of micro-sandblasting treatment only and tin plating treatment with micro-sandblasting. Each specimen had been restored for 48 hours and the bond strength of each specimen was calculated with Universal testing machine. The results were as follows : 1. Porcelain specimen had higher bonding strength than metal specimen for the repair resin(P<0.01). 2. In porcelain specimen, 10% HF etching group had the highest bonding strength among etching and non-etching group. 3. Metal specimen treated with micro-sandblasting had highest bonding strength among the non-sandblasting had hightest bonding strength among the non-precious group, tin plating group had higher bonding strength than micro-sandblasting group between the precious metal groups. 4. Bonding strength of tin plating was increased in precious metal group only.