• Journal of the Korean Chemical Society
• /
• v.58 no.3
• /
• pp.289-296
• /
• 2014

Electrochemical copolymerization of o-chlorophenol (oCP) with o-hydroxyphenol (oHP) was carried out in aqueous $H_2SO_4$ by using cyclic voltammetry (CV) technique. In addition, CV was used to evaluate the differences in electrochemical characteristics of the copolymer in comparison with the corresponding homopolymers, poly(o-chlorophenol) (PoCP) and poly(o-hydroxyphenol) (PoHP). The variation of peak currents with respect to sweep rates was compared between copolymer and homopolymers, PoCP and PoHP, films. Further support for copolymer characterization was obtained by recording UV-visible, IR spectra and elemental analysis. The mechanism of the electrochemical polymerization has been discussed. The monomer reactivity ratios ($r_1$ and $r_2$) were calculated using Fineman-R$\ddot{o}$ss method and was found to be 0.4 and 1.3 repetitivelly and the copolymer structure is a block structure and more rich in oHP units.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.4
• /
• pp.39-45
• /
• 2010

In order to treat paddy soils contaminated by Pb, Cd, and As near the abandoned mine, $H_2PO_4$ was used for stabilization of Pb ($PO_4$/Pb mole ratio of 2/1). In addition, $CaCO_3$ and $FeSO_4$ were used as stabilizers for treating Cd and As (2% w/w), respectively. Leaching tests were conducted with artificial rain in the column to assess the heavy metal stabilization efficiency. The mass of heavy metals in the effluents passed through the columns were analyzed. The remaining heavy metals in the soils were also analyzed as Korean soil standard method, phytoavailability test and sequential extraction test. Lead in the effluent was not detected when $H_2PO_4$ was used as a stabilizer. This result suggests that $H_2PO_4$ is efficient for Pb stabilization. In addition results of sequential extraction scheme suggest that heavy metals are present as residual forms which is not easily extracted.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.122-126
• /
• 2008

The magnetic properties of the organic/inorganic hybrid copper-methylenediphosphonate, Cu2(O3PCH2PO3) were examined by performing the spin dimer analysis based on the extended Hckel tight binding method. In Cu2(O3PCH2PO3) the CuO3 chains made up of edge-sharing CuO5 square pyramidal units are inter-linked by O-P-O bridges. The Cu-O-Cu superexchange interactions of the CuO3 chains are negligibly weak compared with the Cu-O…O-Cu super-superexchange interactions that occur between the CuO3 chains. The spin exchange interactions of Cu2(O3PCH2PO3) are dominated by three super-superexchange interactions, which leads to a three-dimensional antiferromagnetic spin lattice. The strongest spin exchange interactions form isolated spin dimers, which suggests that, to a first approximation, the magnetic properties can be described in terms of an isolated spin dimer model.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.4
• /
• pp.109-114
• /
• 2014

The $Li_3V_2(PO_4)_3$/graphene nano-particles composite was successfully synthesized by a facile sol-gel method. The addition of a graphene in $Li_3V_2(PO_4)_3(LVP)$(LVP) showed the high crystallinity and influenced the morphology of the $Li_3V_2(PO_4)_3$ particles observed in X-ray diffraction (XRD) and scanning electron microscopy (SEM). The LVP/graphene samples were well connected, resulting in fast charge transfer. The effect of the addition graphene nano-particles on electrochemical performance of the materials was investigated. Compared with the pristine LVP, the LVP/graphene composite delivered a higher discharge capacity of $122mAh\;g^{-1}$ at 0.1 C-rate, better rate capability and cyclability in the potential range of 3.0-4.3 V. The electrochemical impedance spectra (EIS) measurement showed the improved electronic conductivity for the LVP/graphene composite, which can ensure the high specific capacity and rate capability.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.63-67
• /
• 2016

Divalent europium-activated $Ca_2PO_4Cl$ phosphor powders were prepared by a chemical synthetic method followed by heat treatment in reduced atmosphere, and the crystal structures, morphologies and photoluminescence properties of the powders were investigated by x-ray powder diffraction, scanning electron microscope and spectrometer. The effect of Ca/P mole ratio at the starting materials on the final products was evaluated. The optimized synthesis condition obtained in this study was Ca/P mole ratio of 2.0. The present phosphor materials had higher photoluminescence intensity and better color purity than the commercial blue phosphor powders, $(Ca,Ba,Sr)_{10}(PO_4)_6Cl_2:Eu^{2+}$. The result of excitation spectrum measurement indicated that the excitation efficiency of the synthesized powders was higher for the long-wavelength UV region than that of the commercial phosphor. It was thus concluded that the samples prepared in this study can be successfully applied for the light-emitting devices such as LED excited with long-wavelength UV light sources.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.469-471
• /
• 2001

Dry grinding of a mixture of CaCO$_3$ and Ca(H$_2$PO$_4$)$_2$.$H_2O$ was conducted using a planetary ball mill in order to investigate solid state reaction for a synthesis of hydroxyapatite(Ca$_{10}$(PO$_4$)$_{6}$(OH)$_2$, HAp) through mechanochemical treatment method. The raw materials, which are composed of waste oyster and calcium biphosphate Ca(H$_2$PO$_4$)$_2$.$H_2O$, were mixed and then treated mechanochemically. The synthesis of hydroxyapatite(Ca$_{10}$(PO$_4$)$_{6}$(OH)$_2$, HAp) from the mixture was almost completed by about 60 minute grinding. The formation of HAp monophase in the ground mixture was characterized through X-ray diffraction (XRD) analysis. Moreover, the formation of HAp monophase depending on the grinding time was improved by increasing the grinding time.ime.ime.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.30-41
• /
• 1997

A purpose of this research is to prove unknown relation -ship between finish bath pH and crosslinking. In pursuit of these goals, we have treated 100% cotton broad cloth with PTCA and BTCA at different pH values. They were used with H$_{3}$PO$_{4}$, NaH$_{2}$PO$_{2}$, NaH$_{2}$PO$_{4}$, Na$_{2}$HPO$_{4}$, Na$_{3}$PO$_{4}$, catalysts to produce nonformaldehyde fabrics finishes. Treatments were applied to all cotton fabrics using a parletry-cure process. For the fully understood on the relationship of finish bath pH effect and cotton cellulose esterification, the relative concentrations of chemical species were calculated from ionization constants. The effect of pH on the cotton cellulose ester was investigated using Fourier transform infrared spectra, the surface area measurement by BET method and wrinkle recovery analysis. Results of differential FT-IR spectra and their relative concentration analysis were compared with those of catalyst treated controls. FT-IR and wrinkle recovery data indicated that the esterfication by polycarboxylic acids is pridependent. A similar phenomenon also occurred when a phosphate or hypophosphite was used. Therefore, it is necessary to choose the optimum pH range of a finishing bath in order to achieve the most effective esterification.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.5-10
• /
• 2002

Deposition condition of NiO that is one of Possible buffer layers for YBCO coated conductors was studied. NiO was deposited on textured Ni substrates by a MOCVD (metal-organic chemical vapor deposition) method. The degree of texture, and the surface roughness were analyzed by X-ray Pole figure, atomic force microscope and scanning electron microscope. The (111) and (200) textures were competitively developed , depending on an oxygen partial Pressure(PO2) and deposition temperature (Tp). The (200) textured NiO layer was deposited at Tp=450~47$0^{\circ}C$ and PO2= 1.67 Torr Out-of-Plane ($\omega$-scan) and in-plane ($\Phi$-scan) textures of the (200) NiO films were as good as 10.34$^{\circ}$ and 10.00$^{\circ}$ respectively The AFM surface roughness of NiO was in the range of 3~4.5 nm at PO2=0.91~3.34 Torr and at Tp=47$0^{\circ}C$ , and in the range of 3~13 nm at TP=450~53$0^{\circ}C$ and at PO2=1.67 Torr.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1665-1668
• /
• 2010

The spin exchange interactions of $(VO)_2(H_2O){O_3P-(CH_2)_3-PO_3}{\cdot}2H_2O$ were examined by spin dimer analysis based on extended Huckel tight binding method. The strongest spin exchange interaction occurs through the super-superexchange path $J_2$ and the second strongest spin exchange interaction occurs through the superexchange interaction path $J_1$. There are two strongly interacting spin exchange paths in $(VO)_2(H_2O){O_3P-(CH_2)_3-PO_3}{\cdot}2H_2O$. Therefore, magnetic susceptibility curve of $(VO)_2(H_2O){O_3P-(CH_2)_3-PO_3}{\cdot}2H_2O$ can be well reproduced by an alternating onedimensional antiferromagnetic chain model rather than an isolated spin dimer model.

• Korean Journal of Materials Research
• /
• v.16 no.10
• /
• pp.624-628
• /
• 2006

In this study, divalent europium-activated $NaCaPO_4$ green phosphor powders were prepared by the chemical synthetic method followed by heat treatment in reduced atmosphere, and the crystal structures, morphologies and photoluminescent properties of the powders were investigated by x-ray powder diffraction, scanning electron microscope and spectrometer for the first time. The effects of Ca/P and Na/Ca mole ratios on the final products were also investigated. The influences of input amount change of europium as the activator on the light emission intensity were studied, and the resulting concentration quenching phenomenon was observed. The optimized synthesis conditions obtained in this study were Ca/P mole ratio 1.2, Na/Ca mole ratio 3.0 and 4 mole%Eu. The peak wavelength was 505 nm for all the samples. The result of excitation spectrum measurement indicated that the excitation efficiency was high for the long-wavelength UV region. It was thus concluded that the samples prepared in this study can be successfully applied for the light-emitting devices such as LED excited with long-wavelength UV light sources.