• Journal of Astronomy and Space Sciences
• /
• 제35권1호
• /
• pp.39-46
• /
• 2018

In this study, the performance of ranging techniques for the Korea Pathfinder Lunar Orbiter (KPLO) space communication system is investigated. KPLO is the first lunar mission of Korea, and pseudo-noise (PN) ranging will be used to support the mission along with sequential ranging. We compared the performance of both ranging techniques using the criteria of accuracy, acquisition probability, and measurement time. First, we investigated the end-to-end accuracy error of a ranging technique incorporating all sources of errors such as from ground stations and the spacecraft communication system. This study demonstrates that increasing the clock frequency of the ranging system is not required when the dominant factor of accuracy error is independent of the thermal noise of the ranging technique being used in the system. Based on the understanding of ranging accuracy, the measurement time of PN and sequential ranging are further investigated and compared, while both techniques satisfied the accuracy and acquisition requirements. We demonstrated that PN ranging performed better than sequential ranging in the signal-to-noise ratio (SNR) regime where KPLO will be operating, and we found that the T2B (weighted-voting balanced Tausworthe, voting v = 2) code is the best choice among the PN codes available for the KPLO mission.

• 전자공학회논문지
• /
• 제50권12호
• /
• pp.14-21
• /
• 2013

위성 운용 및 우주 탐사 미션에서 레인징은 우주 항행체의 위치 정보를 얻기 위한 가장 필수적인 기술이다. 최근에 우주 탐사 미션의 정교한 수행을 위하여 우주 개발국들 간의 상호 협력의 중요성이 증대되고 있다. 상호 협력을 위하여 우주 개발국간의 상호 호환성을 가지는 레인징 시스템이 요구된다. 이러한 이유로, CCSDS는 디지털 표준 레인징 시스템으로서 의사 잡음 레인징을 권고하고 있다. CCSDS 표준 레인징 시스템에서의 의사 잡음 시퀀스의 길이는 심우주 미션에 적합하며 지구 근접 미션에 적용하기는 매우 길다. 본 논문에서는 저궤도 위성, 중궤도 위성 그리고 정지궤도 위성과 같은 지구 근접 미션에 적합한 짧은 길이의 의사 잡음 레인징 시퀀스를 제안하고, CCSDS 표준 의사 잡음 레인징 시스템을 포함하는 다중임무 수행에 적합한 가변길이 의사 잡음 레인징 시스템을 제안한다.

• 한국통신학회논문지
• /
• 제34권7A호
• /
• pp.554-561
• /
• 2009

본 논문에서는 통신과 거리측정을 동시에 행하는 대역확산방식을 이용한 VANET에서의 거리측정 시스템에 다중반송파(Multi-Carrier) 변조방식을 적용한 시스템을 제안한다. 기존방식에서는 자기차량이 송신한 PN신호에 상대차량의 정보를 실어서 재송신하고 자기차량은 대역확산에 의해 상대차량 정보를 파악하였으며, 동시에 송수신한 PN신호의 위상차를 탐지허여 차량거리를 정확하게 측정하는 것이 가능했다. 그러나 그 차량거리 측정의 문제점으로서 위상차의 탐지 오차와 분석 능력을 높이기 위해 고속 PN신호가 펼요할 수밖에 없다. 제안 시스템은 이러한 문제점 해결을 위해 다중반송파 변조방식을 적용했다. 다중반송파 변조방식은 단일반송파와 비교해서 Chip rate이 작은 PN신호를 사용함으로 단일반송파와 동일한 주파수 대역에서 복수의 반송파 이용이 가능하다. 복수의 반송파는 등이득 합성법에 의해 합성되기 때문에 다이버시티 효과가 얻어져 위상차의 에러검출을 방지하는 것이 가능하고 정밀 거리측정도 기존방식과 비교해서 우수하게 개선되었다.

• 한국군사과학기술학회지
• /
• 제19권6호
• /
• pp.762-768
• /
• 2016

In this paper, a method for generating ranging signal to reduce the effects of interference and overcome intentional jamming is proposed in slow frequency hopping(SFH) communication system. A terminal uses ranging signal for initial Up-link synchronization in the frequency hopping communication systems using multi-terminal. However, ranging signal generated by unsynchronized terminal acts as an interference signal to another terminal. Therefore, we propose the design of the ranging signal with PN sequence in order to minimize the affection to the other terminal and simulated its performance. From the simulated result, we confirm synchronization performance.

• 한국통신학회논문지
• /
• 제34권5C호
• /
• pp.555-560
• /
• 2009

차량 충돌 위험을 줄이기 위해 거리 측정용 차량 레이더에 대한 연구가 활발히 진행되고 있다. Direct sequence-ultra wideband를 (DS-UWB) 이용한 차량 레이더는 고속으로 이동하는 차량들 사이에서 충분한 시간적인 여유를 두어 목표물까지의 거리를 측정한다. 따라서 UWB 파형을 이용하면 수신기는 거리를 빠르게 측정하여, 충분한 시간적인 여유를 둘 수 있다. 이에 대한 연구가 진행된 바 있으나 본 논문에서는 그보다 간단한 시스템을 기반으로 빠른 처리 속도로 거리를 측정하여 차량 충돌 방지를 위한 시간적 여유를 확보할 수 있는 기법을 제안한다. 그리고 모의실험 결과를 통해 기존 기법보다 빠른 처리 속도를 확인할 수 있다.

• Journal of Animal Science and Technology
• /
• 제61권1호
• /
• pp.10-17
• /
• 2019

The present study was undertaken to investigate the effects of the plane of nutrition (PN) for growing-finishing pigs on growth performance and meat quality in summer. One hundred and two barrows and 102 gilts weighing approximately 44 kg were placed on a high-, medium-, or low-plane grower diet (HPG, MPG, or LPG) with ME and lysine concentrations ranging from 3.33 to 3.40 Mcal/kg and 0.93% to 1.15%, respectively, for 29 days in 6 replicates (pens) in total. Pigs from each grower pen were divided into two finisher pens and provided with a high-plane finisher diet (HPF) containing 3.40 Mcal ME and 9.5 g lysine/kg and a low-plane finisher diet (LPF; 3.25 Mcal ME and 8 g lysine/kg), respectively, up to approximately 110 kg, and slaughtered. Growth performance of the pigs, including average daily gain (ADG), average daily feed intake (ADFI), and gain:feed ratio, was not influenced by the grower-phase PN during any of the grower phase, a 31-d finisher phase I, and ensuing phase II. However, both the ADG and gain:feed ratio were greater (p < 0.05) for the HPF group than for the LPF group during the finisher phase I (748 vs. 653 g with SEM = 13 g and 0.333 vs. 0.299 with SEM = 0.008, respectively). The ADG, but not gain:feed ratio, was greater for the HPF group vs. LPF during the finisher phase II (673 vs. 623 g with SEM = 15 g for ADG and 0.322 vs. 0.323 with SEM = 0.005 for the gain:feed ratio). The carcass backfat thickness (BFT) was greater for the LPF group vs. HPF within the pigs which had been placed on LPG during the grower phase, but not within the pigs from the HPG or MPG group. Physicochemical characteristics of the longissimus dorsi muscle (LM) and sensory quality attributes of fresh and cooked LM were not influenced by either the grower-phase or finisher-phase PN. In conclusion, high PN is necessary for finishing pigs during the hot season to minimize the reduced rate of weight gain and also to prevent the increase of BFT that could result from low PN.

• 생물환경조절학회지
• /
• 제19권2호
• /
• pp.97-108
• /
• 2010

본 연구에서는 산마늘(Allium victorialis var. platyphyllum)과 곰취(Ligularia fischeri), 곤달비(Ligularia stenocephala)를 대상으로 시비처리에 따른 광합성 특성, 엽록소 형광반응, 엽록소 함량변화 등을 조사 분석하여 시비처리에 따른 공시식물의 영향을 분석한 결과 다음과 같은 결론을 얻을 수 있었다. 시비처리에 따른 광합성 능력 및 광화학 효율은 공시식물 모두 $5g{\cdot}l^{-1}$ 시비에서 가장 우수하였으며, $10g{\cdot}l^{-1}$ 시비에서는 과량 시비로 인한 생육저하 현상으로 오히려 감소하는 경향을 나타냈다. 또한 산마늘은 피음 처리구에서, 곰취와 곤달비는 무 처리구에서 더 우수한 광합성 특성 및 광화학 효율을 보였는데 이는 각 식물이 적정 광 환경에서 시비에 대한 영향을 더 많이 받는 것으로, 식물별 적정 광도 조건에서 최대의 시비 효과를 얻을 수 있을 것으로 판단된다. 공시식물의 총 엽록소 함량은 $5g{\cdot}l^{-1}$ 시비에서 $11.70\sim24.36mg{\cdot}g^{-1}$의 범위 내로 가장 많았으며, 무처리구보다 피음 처리구에서 더 많은 함량을 보였다. 이와 같은 현상이 일어나는 이유는 광이 부족한 환경에 적응하면서 정상적인 광합성을 지속하기 위해 광에너지를 가능한 한 많이 확보하는 방법으로 엽록소함량을 높게 유지할 필요가 있기 때문이다. 이상의 결과를 종합해 보면 공시식물 모두 지효성 비료인 Osmocote 이용 시 $5g{\cdot}l^{-1}$ 시비가 본 시험지와 같은 환경조건에서 가장 유용한 시비처리로 생각된다. 그러나 시비뿐만 아니라 각 산채류의 적정 광도조건에 의해 생육이 달라지는 결과를 보였는데, 이는 산채류 재배 시 시비처리, 수확방법 등의 재배기술과 함께 각 식물별 적정 생육환경을 구명하는 연구가 보다 많이 이루어져야 할 것으로 판단된다.

• 전자공학회논문지A
• /
• 제29A권10호
• /
• pp.29-34
• /
• 1992

JFET's with gate lengths ranging from 1$\mu$m to 8.3$\mu$m are successfully fabricated on InP substrate where the long haul (1.3$\mu$m~8.3$\mu$m) OEIC's(OptoElectronic Integrated Circuits) have been made. The pn junction of InP JFET's is made by co-implantation and RTA process. JFET's have etched-mesa-gate structure and the maximum gm larger than 90mS/mm was measured and this is the highest record in JFET's of such structure without S/D n$^{+}$ ion implantation. To maintain maximum g$_m$ should be well controlled the overetch of n-layer which inevitably occurs during etching off the unused p-layer. The I-V characteristic is checked during p-layer etch, for this purpose. A dc voltage gain of 11 is obtained from a preamplifier circuit thus fabricated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1237-1243
• /
• 2014

The aim of the present paper is to analyze the friction and mass flow in a rough microchannel using Lattice Boltzmann Method (LBM). The LBM is a kinetic method based on the particle distribution function, so it can be fruitfully used to study the flow dependence on Knudsen number including slip velocity, pressure drop in rough microchannel. The surface roughness elements are taken to be considered as a series of circular shaped riblets throughout the channel with relative roughness height up to a maximum 10% of the channel height. The friction coefficients in terms of Poiseuille number (Pn), mass flow rate and the flow behaviors have been discussed in order to study the effect of surface roughness in the slip flow regime at Knudsen number (Kn), ranging from 0.01 to 0.10. It is seen that the friction factor and the flow behaviors in a rough microchannel strongly depend on the rarefaction effect and the relative roughness height. The friction factor in a rough microchannel is higher than that in smooth channel but the mass flow rate is lower than that of smooth channel. Moreover, it is seen that the friction factor increased with relative roughness height but decreased with increasing the Kundsen number (Kn) whereas the mass flow rate is decreased with increasing both of surface roughness height and Knudsen number.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제23권2호
• /
• pp.91-99
• /
• 2023

Background: Extrusion of debris is a major factor that results in postoperative pain during root canal treatment with various instruments and instrumentation techniques. Therefore, instrumentation techniques that extrude minimal debris into the periapical area while reducing pain are desirable. This study aimed to compare the incidence of postoperative pain and intake of analgesic medication (frequency and quantity) after endodontic treatment of mandibular posterior teeth using two single files and full-sequence continuous rotary systems with different kinematic motions. Methods: Thirty-five of 105 patients were assigned equally to three groups according to the instrumentation system used: ProTaper Next (PN) X2, 25/06 (Dentsply, Maillefer, Ballaigues, Switzerland), One Shape (OS), #0.25/06 (Micro Mega, Besancon, France), and Wave One Gold (WG), Red - #0.25, 0.07 (Dentsply, Maillefer, Ballaigues, Switzerland). Five specialists were included in this study design; each professional prepared 21 teeth, and randomly selected 7 per instrument system. The VAS sheet ranging from 0 to 10 was used to record the initial and postoperative pains at 24, 48, and 72 h, and 7^th day after single visit endodontic treatment in mandibular premolars and molars with a diagnosis of asymptomatic irreversible pulpitis with or without apical periodontitis. Postoperatively, an analgesic, ibuprofen 400 mg was administered for intolerable pain at a dose of 1 tablet for 6 h. The patients were asked over the telephone regarding postoperative pain at intervals of 24, 48, and 72 h, and 7^th day using a visual analogue scale. Result: There were no statistically significant differences among the PN, OS, and WG systems (P > 0.05) with regard to the incidence of postoperative pain at any of the four time points assessed. Conclusion: The intensity of postoperative pain, frequency, and analgesic intake were similar across all three types of instrument systems; however, the reciprocating single file (WG) was associated with less postoperative pain than the full sequence continuous rotary file.