• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1663-1674
• /
• 2017

This paper deals with the robust speed regulation of a surface-mounted permanent magnet synchronous motor (SPMSM) that is subject to parametric uncertainties and external disturbances. The proposed approach retains a conventional cascade control configuration composed of an outer-loop speed control module and inner-loop current control modules. Baseline proportional-integral (PI) controllers are designed for nominal modular systems without accounting for the uncertainties to set a desired control performance of the closed-loop system. After studied in both frequency and time domains, a reduced-order proportional-integral observer (PIO), as a modular disturbance observer, is incorporated with each control module to maintain the ideal performance of the modules. Theoretical analysis confirms the desired performance recovery of the augmented system with modular PIOs to the nominal system. Comparative computer simulations and experimental results validate the proposed cascade control method for SPMSM speed regulation.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.406-410
• /
• 2004

Generally, a voltage difference exists between the reference and the output voltagesin a pulse width modulated (PWM) voltage source inverter (VSI). In this paper, the nonlinearity in a PWM VSI is analyzed and a new on-line estimation method in consideration of parameter variations for a permanent magnet synchronous motor (PMSM) is proposed to compensate the time varying voltage distortion.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.918-920
• /
• 2001

PMSM drives are widely used in industrial and residential applications because of high efficiency, high power density and high performance. For better performance of PMSM, however, torque ripples should be reduced. This paper investigates a reduction of torque ripple due to the unsinusoidal flux linkage produced by the shapes of stator slot and magnetic pole. To minimize torque ripple, a simple flux estimator is proposed. This method iteratively compensates the distributed flux linkage from an error between the measured and estimated currents. The proposed algorithm is verified through simulation.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.848-849
• /
• 2008

This paper presents a simulation model to analyze effects of electrical faults for the Permanent Magnet Synchronous Motor(PMSM) drive system. The major fault modes of system are investigated and an intuitive system model is developed using MATLAB/Simulink. The developed model provides useful environments to inject and remove the various faults. Simulation results show the dynamic performances of system during the transient state from normal to fault, and those will be a great help to make a system more reliable.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.715-716
• /
• 2015

영구자석 전동기(Permanent Magnet Synchronous Motor : 이하 PMSM)는 기존 유도전동기에 비해 자속량, 토크 리플 측면에서 우수하다. 또한 모터 제작시 특수모터가 아닌 실용 모터임에 따라 절연재를 위한 공간, 가격대비 효율 등을 고려해야 한다. 본 논문에서는 팬부하용 전동기의 권선형태가 전절권과 동심권을 가질 경우 두 전동기의 특성을 비교하며, 엔드코일의 다른 형태를 통해 볼 수 있는 차이점을 분석 하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.55-58
• /
• 2003

IPMSM (Interior Permanent Magnet Synchronous Motor) is widely used in many applications such as an electric vehicle, compressor drives of air conditioner and machine tool spindle drives. In order to maximize the efficiency in such applications, this paper is proposed the optimal control method of the armature current. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM The proposed control algorithm is applied to IPMSM drive system, the operating characteristics controlled by efficiency optimization control are examined in detail by simulation.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.98-99
• /
• 2019

본 논문에서는 PMSM(Permanent Magnet Synchronous Motor)의 구동 효율을 향상시키기 위한 최대 효율 제어 기법에 대해 제안한다. 제안된 기법은 전동기의 입력 전력이 최소가 되도록 Gradient Decent 알고리즘을 기반으로 하는 최적화 기법인 Adaptive 알고리즘을 통해 전류각을 조정한다. 제안된 기법을 통해 동손을 최소로 제어하는 기존 MTPA(Maximum Torque Per Ampere) 제어 방식 보다 구동 효율을 향상시킬 수 있으며 전동기의 제정수 오차에 강인하다. 1.7kW IPMSM의 모의실험을 통해 제안된 기법의 효용성을 검증하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.123-128
• /
• 2004

Recently with the development of power switching device and DSP which has perip -heral devices to control AC servo system, the servo technology has met a new development opportunity. In this study, a DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F2812 version C which has the performance of fast speed, 150MIPS, and rich peripheral interface is used. Also space vector pulse width modulation (SVPWM) and the digital PI control are implemented to the servo control system.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.408-409
• /
• 2019

PMSM(Permanent Magnet Synchronous Motor)의 약자속 제어 시 인버터를 6-스텝 모드까지 운전함으로써 전동기의 출력 토크 능력을 최대로 활용할 수 있다. 그러나 6-스텝 동작을 위해 일반적으로 사용되는 정적 과변조 기법의 경우 구현이 복잡하며, 과도 상태에서의 동작이 고려되지 않기 때문에 토크 응답 특성이 저하된다. 이에 비해 구현이 간단한 동적 과변조 기법을 사용하는 경우 전압변조지수 증가에 따라 인버터의 전압 이득이 1보다 비선형적으로 크게 작아지기 때문에 6-스텝 모드에서의 운전이 힘들다. 이에 본 논문에서는 구현이 용이한 동적 과변조 기법에 대해 과변조 성능이 향상되도록 하는 방법을 제안하며, 제안된 방법에 의해 인버터가 6-스텝 모드까지 운전될 수 있으므로 구동 전동기의 출력 토크 능력을 최대한으로 활용할 수 있으며, 향상된 토크 응답 특성을 얻을 수 있다.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.168-178
• /
• 2019

Discrete space vector modulation (DSVM) is an effective method to improve the steady-state performance of the finite control set predictive control for permanent magnet synchronous motor drive systems. However, it requires complex computations due to the presence of numerous virtual voltage vectors. This paper proposes an improved finite control set model-free predictive control using DSVM to reduce the computational burden. First, model-free deadbeat current control is used to generate the reference voltage vector. Then, based on the principle that the voltage vector closest to the reference voltage vector minimizes the cost function, the optimal voltage vector is obtained in an effective way which avoids evaluation of the cost function. Additionally, in order to implement double-objective control, a two-level decisional cost function is designed to sequentially reduce the stator currents tracking error and the inverter switching frequency. The effectiveness of the proposed control is validated based on experimental tests.