• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.620-623
• /
• 2000

A very simple control approach using neural network for the robust position control of a Permanent Magnet Synchronous Motor(PMSM) is presented The linear quadratic controller plus feedforward neural network is employed to obtain the robust PMSM system approximately linearized using field-orientation method for an AC servo. The neural network is trained in on-line phases and this neural network is composed by a fedforward recall and error back-propagation training. Since the total number of nodes are only eight this system can be easily realized by the general microprocessor. During the normal operation the input-output response is sampled and the weighting value is trained multi-times by error back-propagation method at each sample period to accommodate the possible variations in the parameters or load torque. And the state space analysis is performed to obtain the state feedback gains systematically. IN addition the robustness is also obtained without affecting overall system response. This method is realized by a floating-point Digital Singal Processor DS1102 Board (TMS320C31) The basic DSP software is used to write C program which is compiled by using ANSI-C style function prototypes.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1537-1547
• /
• 2017

In this paper, a discrete-time robust current controller is proposed for PMSM drives. The structure of the proposed controller is quite simple and does not require high computational resource. The only difference of the proposed controller from the classical dead-beat controller is the integral term which can easily be implemented in a PMSM drive. The stability analysis of the proposed controller is performed accounting in parametric uncertainties, unmodelled dynamics and disturbances in the mathematical model. The boundedness of the dynamical system and asymptotic convergence of dq-axes currents to their reference values are provided under certain conditions. Various simulation and experimental studies are performed and the results taken at different operation conditions show the validity of the proposed controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.265-268
• /
• 2004

교류 전동기의 전류 제어 특성은 전동기의 재정 수의 특성, 전류 제어기의 구성 및 제어 주기, PWM기법 및 주파수에 의해 달라지며, 시스템의 동적 특성 및 효율에도 큰 영향을 미친다. 본 논문은 PMSM(Permanent magnet synchronous motor)의 동기좌표계에서 벡터 제어 시 전류 제어 특성을 분석할 수 있는 실제와 동일한 디지털 전류 제어기 및 SVPWM(Space Vector PW)을 포함한 시뮬레이터를 구현하였으며 고속 및 일반 PMSM을 대상으로 시뮬레이션을 수행하여 그 결과 전류 제어 특성의 예측 가능함을 보였다.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.184-193
• /
• 2014

This paper presents a high performance ZPE(zero-phase-error) speed controller for PMSM(permanent magnet synchronous motor) drives. A comparison study between conventional general purpose speed controller in modern industry fields such as PI, IP and 2-degree of freedom controller presented also. The proposed ZPE speed controller is found suitable for vector controlled PMSM drives in giving the high level of performance while maintaining the excellent response at the time of speed command changing. In MATLAB-based comparative simulation and experiment results with commercial drive system, the proposed method shows a superior control performance compared with the conventional speed controller widely-used.

• 조명전기설비학회논문지
• /
• 제26권1호
• /
• pp.29-37
• /
• 2012

A simple and effective dead time compensation scheme for a PWM inverter-fed permanent magnet synchronous motor (PMSM) drive using the model reference adaptive control (MRAC) and coordinate transformation is presented. The basic concept is to first transform a time-varying disturbance caused by the dead time and inverter nonlinearity into unknown constant or slowly-varying one by the coordinate transformation, and then use the MRAC design technique to estimate this parameter in the stationary reference frame. Since the MRAC scheme is a suitable way of estimating such a parameter, the control performance can be significantly improved as compared with the conventional observer-based method tracking time-varying parameters. In the proposed scheme, the disturbance voltage caused by the dead time is effectively estimated and compensated by on-line basis without any additional circuits nor existing disadvantages as in the conventional methods. The asymptotic stability is proved and the effectiveness of the proposed scheme is verified.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.30-36
• /
• 2004

An iterative sliding mode observer is proposed to sensorless control of a PMSM(Permanent Magnet Synchronous Motor). The proposed sliding mode observer has the character which is robust to the disturbance and parameters variation. A low pass filter with the variable cut-off frequency is also proposed to compensate the delay of the rotor angle according to the rotor speed, it is led to save memory and minimize operation time. Experimental results show that the proposed sliding mode observer leads to the proper performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.120-126
• /
• 2001

This paper presents a solution to control a PMSM(Permanent Magnet Synchronous Motor) without sensor. The control method is the presented superposition principle. This method of sensorless theory is very simple to compute estimated angle. The use of this system yields enhanced operations, fewer system components, lower system costs, efficient energy control system designs and increased efficiencies. A practical solution is described and its results are given in this study. The performance of a sensorless architecture allows an intelligent approach to reduce the complete system costs of digital motion control applications using the cheaper electrical sensorless motors. This paper deals with an overview of solutions in the sensorless PMSM control applications, whereby the focus will be the new sensorless controller and its applications.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권3호
• /
• pp.330-335
• /
• 2013

This paper performs two kinds of Field-Oriented Control (FOC) for dual three phase permanent magnet synchronous motor (DTP-PMSM).The first is based on vector space decomposition to study the effect of current harmonics on electromechanical energy conversion. And the second presents the coupling relations between two sets of windings using two d-q transformation. And then this paper has deeply studied the differences between these two strategies, the different effect on the control of harmonic current and the reason for these differences. MATLAB-based Simulation studies of a 3KW DTP-PMSM are carried out to verify the analysis of differences between the two FOC strategies.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.16-18
• /
• 2007

In this paper, an advanced DTC(Direct Torque Control) scheme for PMSM(Permanent Magnet Synchronous Motor) is presented. The proposed DTC method uses a conventional torque estimator and torque error. But the switching signal is generated by PWM method according to the switching rules and torque error. A simple calculation of PMW without any complex determination of space vector can assure the constant switching frequency with an excellent control performance. The proposed torque control scheme for PMSM is verified by computer simulation.

• 전력전자학회논문지
• /
• 제12권1호
• /
• pp.65-73
• /
• 2007

본 논문은 1-Hz의 낮은 고정자 전류 주파수에서도 동작하는 순수적분 기반의 자속추정을 위한 온라인 전류측정 오차 보상방법을 제안한다. 오프셋 전류와 변환이득오차에 의한 역상분 전류 성분은 상태관측기를 이용하여 제거하고, 동시에 변환이득오차에 의한 역상분 전류는 동기좌표계에서 영구자석에 의하여 발생된 q축 자속을 기준모델에 의한 값과 추정된 자속에 의한 값 사이의 차이에 의하여 보상한다. 이 보상기는 PI제어기를 이용하여 두 값 사이의 오차가 0이 되도록 제어한다. 또한 적분기 초기값 오차 및 관측기의 전동기 상수 오차에 의한 잔여오차 보상방법도 제안하였다. 타당성을 입증하기 위하여 1.1-kW 영구자석형 동기전동기(PMSM)에 제안된 보상 방법을 구현하여 다양한 실험을 수행하였다.