• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.380-380
• /
• 2012

유기물 나노 복합체는 고집적/저전력/플렉서블 특성을 가지는 초고효율 비휘발성 메모리 소자를 제작하는데 많은 이점을 가지고 있어, 차세대 비휘발성 메모리 소자에 사용되는 소재로 매우 각광받고 있다. 그 중, WORM 특성을 가지는 메모리 소자는 1회 쓰기 후 수많은 읽기가 가능하기 때문에, 그 효율성이 매우 뛰어나 이목을 끌고 있다. 유기물 나노 복합체 중에서, poly(3-hexylthiophene) (P3HT)는 화학적/전기적 안정성과 전하의 이동도 특성이 뛰어나기 때문에 전자 소자에 응용하려는 연구가 활발히 진행되고 있다. 본 연구에서는 $P_3HT$ 고분자를 polymethylmethacrylate(PMMA) 고분자에 분산시킴으로써, 상태를 기억하는 저장 매체로 사용하였다. 본 연구의 소자를 제작하기 위하여 약 9 : 1 비율을 가지는 PMMA 와 $P_3HT$를 용매인 클로로벤젠에 녹여 용액을 준비하였다. Indium Tin Oxide (ITO)가 코팅된 glass를 화학적 처리를 통해 청결하게 만든 후, PMMA와 $P_3HT$가 용해되어 있는 용액을 스핀 코팅 방법으로 박막을 형성하였다. PMMA 속에 $P_3HT$가 분산되어 있는 활성층 위에 상부 전극으로 Al을 열 증착 방식을 통하여 형성하였다. 제작된 WORM 특성을 갖는 유기물 나노 복합체 플렉서블 소자의 메모리 효과에 대한 분석을 위하여, -5V에서 5V까지 전압을 인가하여 전류-전압 특성을 측정하였다. 초기 낮은 전도도 (OFF 상태, 10-10A에서 10-4A)를 유지하다가, 쓰기 전압을 1회 가해준 후부터는 높은 전도도 (ON 상태, 10-5A 에서 10-2A)를 유지하는 특성을 관측하였다. 또한 WORM 특성을 갖는 메모리 소자로써의 능력을 보여주기 위하여, 1회 쓰기 전압 후 읽기 전압인 1V를 인가하여 높은 전도도 상태에 대한 상태 유지 능력을 측정하였고, 전하 수송 메커니즘을 규명하기 위하여 피팅 모델을 통해 설명하였다.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.327-335
• /
• 2019

Purpose: To investigate the radiological efficacy of polymethylmethacrylate (PMMA) augmentation of pedicle screw operation in osteoporotic vertebral compression fractures (OVCF) patients. Materials and Methods: Twenty OVCF patients, who underwent only posterior fusion using pedicle screws with PMMA augmentation, were included in the study. The mean follow-up period was 15.6 months. The demographic data, bone mineral density (BMD), fusion segments, number of pedicle screws, and amount of PMMA were reviewed as medical records. To analyze the radiological outcomes, the radiologic parameters were measured as the time serial follow-up (preoperation, immediately postoperation, postoperation 6 weeks, 3, 6 months, and 1 year follow-up). Results: A total of 20 patients were examined (16 females [80.0%]; mean age, 69.1±8.9 years). The average BMD was -2.5±0.9 g/cm². The average cement volume per vertebral body was 6.3 ml. The mean preoperative Cobb angle of focal kyphosis was 32.7°±7.0° and was improved significantly to 8.7°±6.9° postoperatively (p<0.001), with maintenance of the correction at the serial follow-up, postoperatively. The Cobb angle of instrumented kyphosis, wedge angle, and sagittal index showed similar patterns. In addition, the anterior part of fractured vertebral body height averaged 11.0±5.0 mm and was improved to 18.5±5.7 mm postoperatively (p=0.006), with maintenance of the improvement at the 3-month, 6-month, and 1-year follow-up. Conclusion: The reinforcement of pedicle screws using PMMA augmentation may be a feasible surgical technique for OVCF. Moreover, it appears to be appropriate for improving the focal thoracolumbar/lumbar kyphosis and is maintained well after surgery.

• Journal of the Optical Society of Korea
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2012

Polymethylmethacrylate powders are commonly used to improve the spreadability and blurring effects of powder foundation cosmetics. In this study, the opacity and haze effect of four types of polymethylmethacrylate powders and their 10wt% powder foundation formulation was evaluated. The distorted random hemispherical particulates with both concave and convex portions showed the highest haze and opacity value as a single powder substance. And as a formulated phase, the powder foundation formulation containing particulates with fine pores provided the highest haze and opacity value. We also examined the quantity of reflected light over the angular range $20-75^{\circ}$ by polarized light goniophotometry. The total reflected light intensity, surface-reflected light, and internally reflected light were characterized. These studies demonstrated that hemispherical PMMA powders produce natural brilliance by creating high internally reflected light which is similar to the total reflection profile of artificial skin.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.491-497
• /
• 2001

Polymethylmethacrylate(PMMA) is currently commonly used material for the reconstruction of bone defects and fixation of joint prosthetics following congenital and acquired causes. Although PMMA has widespread use, it does not possess the ideal mechanical characteristics with osteoconductivity and osteoinductivity required. In order to overcome these problem, addition of bovine bone drived defatting demineralized bone(BDB) powders to a PMMA bone cement was done for improvement of physical property and bone forming characteristics of composite. In order to investigate the influence of BDB reinforcement on the PMMA, we measured physical property of compressive, tensile, flexural strength, and scanning electron microscopic examinations. The results were obtained as follows: 1. The PMMA forms a solid cellular matrix with open cells about $100{\mu}m$ in variable size and incorporating BDB. BDB aggregates inside the cells form a porous network that is accessible from the outer surface. 2. The physical properties were compressive strength of mean $22.74{\pm}1.69MPa$, tensile strength of mean $22.74{\pm}1.69MPa$, flexural strength of mean $77.53{\pm}6.93MPa$. Scanning electron microscopic examinations were revealed that there was DBD particles form a highly porous agglomerates. BDB can be added PMMA in the form of dried powders, the composites are applicable as bone substitutes. BDB and PMMA mixture is shown to produce a class of composites that due to their microstructure and improved mechanical properties may be suitable for application as bone subsitutes. The mechanical and material properties of the BDB-PMMA bone substitute composites are competitive with those properties of a porous ceramic matrix of other hydroxyapatite and with those of natural bones.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.397-402
• /
• 2006

We have investigated the effect of each ingredient in the light diffusing film (LDF) which was used as backlight unit (BLU) of TFT-LCD TV on physical, electrical, thermal and optical properties of LDF. In anti-blocking layer, the excellent anti-blocking ability was obtained when 0.5~1.5 wt% of acrylic bead was added, and good decay-time and water-stability were shown when 0.8 wt% of tertiary ammonium salt was added. Optimal results for adhesion strength, curing rates and flexibility on the surface of PET film have been obtained in the light diffusing layer by using acrylic polyol as a binder resin, and by addition of 30~35 wt% non-yellowing type HDI crosslinker. In addition, the highest normal luminance value was obtained by addition of 250 wt% poly-dispersive polystyrene ($20{\mu}m$ PS) and polymethylmethacrylate ($20{\mu}m$ PMMA) beads into the binder resin (100 wt%). The higher normal luminance could be got for PMMA beads than PS beads because of the transmittance difference.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.144-152
• /
• 2023

To evaluate the fire risk of combustible materials, Chung's equations VII, VIII, and IX were newly established. The fire risk index-IX (FRI-IX) and fire risk rating (FRR) were calculated. Ginkgo, dawn redwood, toona, lime, walnut, and polymethylmethacrylate (PMMA) were selected as test specimens. The combustion characteristics were evaluated using a cone calorimeter according to ISO 5660-1. After combustion, the fire performance index-VII (FPI-VII) of the specimens, varied between 15.15 and 182.53 s²/kW, as determined by Chung's equations, and the fire growth index-VII (FGI-VII) varied between 0.0023 and 0.0165 kW/s². The fire performance index-VIII (FPI-VIII) based on PMMA varied between 0.29 and 3.45, and the fire growth index-VIII (FGI-VIII) varied between 2.88 and 20.63. The FRI-IX, which is the fire risk rating, showed dawn redwood has a very high fire risk, with FRI-IX values of 71.14 (fire risk rating: G). Therefore, wood with a large amount of volatile organic compounds and a low bulk density showed a high value of FRI-IX by lowering FPI-VII and FPI-VIII and increasing FGI-VII and FGI-VIII.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1923-1930
• /
• 2002

In this paper, we present modeling and simulation of microlens formation by means of a deep X-ray lithography followed by a thermal treatment of a PMMA (Polymethylmethacrylate) sheet. According to this modeling, X-ray irradiation causes the decrease of molecular weight of PMMA, which in turn decreases the glass transition temperature and consequently causes a net volume increase during the thermal cycle resulting in a swollen microlens. In this modeling, the free volume theory including the relaxation process during the cooling process was considered. The simulation results indicate that the modeling in this study is able to predict the fabricated microlens shapes and the variation pattern of the maximum heights of microlens which depends on the conditions of the thermal treatment. The prediction model could be applied to optimization of microlens fabrication process and to designing a micro mold insert for micromolding processes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.393.2-393.2
• /
• 2014

유기물/무기물 나노복합체를 이용하여 제작한 비휘발성 메모리 소자는 유기 박막 소자의 응용 때문에 많은 연구가 진행되고 있다. 유기물 박막 안에 분산된 금속 나노입자를 사용하여 제작한 메모리 소자의 전기적 특성 향상에 대한 연구가 많은 주목을 받고 있다. 본 연구에서는 Ag 금속 나노입자가 유기물 박막 안에 분산된 유기 쌍안정성 메모리 소자에서 메모리 특성 및 나노입자의 분산 농도에 따른 전기적 특성에 미치는 영향을 연구하였다. 화학적 방법을 이용하여 합성한 Ag 금속 나노입자를 클로로벤젠에 용해되어 있는 polymethylmethacrylate (PMMA) 용액을 제작하였다. Ag 금속 나노입자 포함된 용액을 p-형 Si 기판 위에 스핀 코팅한 후, 열을 가해 남아있는 용매를 제거하여 Ag 금속 나노입자가 PMMA 유기물에 분산되어 있는 나노복합체 박막을 형성하였다. 형성된 Ag 금속 나노입자가 포함된 나노복합체 박막 위에 상부 전극으로 Al을 열증착하여 비휘발성 메모리 소자를 제작하였다. 제작된 소자의 전하 저장 능력을 측정하여 Ag 금속 나노입자를 포함하지 않은 소자의 전하 저장 능력과 비교하여 Ag 금속 나노입자가 메모리 소자에서의 전하 저장 매체의 중요한 역할인 것을 확인하였다. Ag 금속 나노입자의 농도에 따른 전하 저장 능력 및 전기적 특성에 대해서도 측정 및 확인 하였다.

• Korea-Australia Rheology Journal
• /
• v.13 no.3
• /
• pp.125-130
• /
• 2001

Block copolymers of PC-b-PMMA (polycarbonate-b-polymethylmethacrylate) and PC -b-SAN (polycarbonate-b-(styrene-c-acrylonitrile)), were examined as compatibilizers for blonds of PC with SAN copolymer. The average diameter of the dispersed particles was measured with an image analyser, and the interfacial properties of the blonds were analysed with an imbedded fiber retraction (IFR) technique. The average diameter of dispersed particles and interfacial tension of the PC/SAN blends reached a minimum value when the SAN copolymer contained about 24 wt% AN. Interfacial tension and particle size were further reduced by adding compatibilizer to the PC/SAN blends. PC-b-PMMA was more effective than PC-b-SAN as a compatibilizer in reducing the average diameter of the dispersed particles and interfacial tension of PC/SAN blend. A direct proportionality between the particle diameter and interfacial tension was also observed. The interfacial properties of the PC/SAN blends were optimized by adding a block copolymer and using an SAN copolymer that had minimum interaction energy with PC.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.14-17
• /
• 2006

A thin GaN semiconducting film that grows on sapphires due to metalorganic chemical vapor deposition was machined for nanophotonic applications. The thin film had multilayered superlattice structures, including nanoscaled InGaN layers. Eight alternating InGaN/GaN multilayers provided a blue light emission source. Nanoscaled holes, 150 nm in diameter, were patterned on polymethylmethacrylate (PMMA) film using an electron beam lithography system. The PMMA film blocked the etching species. Air holes, 75 nm in diameter, which acted as blue light diffraction sources, were etched on the top GaN layer by an inductively coupled plasma etcher. Hexagonal lattice photonic crystals were fabricated with 230-, 460-, 690-, and 920-nm pitches. The 450-nm wavelength blue light provided the nanodiffraction destructive and constructive interferences phenomena, which were dependent on the pitch of the holes.