• Journal of Chest Surgery
• /
• v.31 no.7
• /
• pp.643-649
• /
• 1998

Background: For the patient with chronic obstructive pulmonary disease requiring long-term oxygen therapy, oxygen concentrator machines are already widely available for use in home. In this study, we used mongrel dogs as test subjects to compare the functional efficiency and safety of the oxygen concentrator developed by our own research team with those of the imported FORLIFE(TM) machine made by AIRSEP Corp. Method and method: To test mechanical reliability, the concentrations of oxygen delivered were measured after 4 hours of continuous operation. Sixteen mongrel dogs were divided into two equal groups. Mongrel dogs in group A were given oxygen using the imported oxygen concentrator, and those in group B using the machine developed. 5 l/min of oxygen were given, after which vital signs were analyzed, arterial blood gases measured, and blood chemistry tests carried out. Results: After 4 hours of continuous operation, the imported model performed better, giving 98${\pm}$3% oxygen, compared to our model, which gave 91${\pm}$1%. In the animal experiments, oxygen concentrations were measured at the inlet of face mask 1, 2, 3, and 4 hours after continuous administration, and there was no statistically significant difference(repeated measures of analysis of variance p=0.70) between the values of 70.6${\pm}$2.5%, 67.1${\pm}$2.9%, 68.2${\pm}$2.6%, and 64.9${\pm}$3.9% that were measured from group A, and the values of 65.1${\pm}$4.8%, 65.2${\pm}$3.6%, 68.7${\pm}$4.3%, and 66.0${\pm}$5.0% measured from group B. Before oxygen administration, and at 1, 2, 3, and 4 hours after oxygen administration, arterial blood partial pressure of oxygen 87.2${\pm}$2.5 mmHg, 347.4${\pm}$29.3 mmHg, 353.4${\pm}$21.2 mmHg, 343.0${\pm}$28.8 mmHg, and 321.6${\pm}$24.4 mmHg, respectively, were read from group A, which were not statistically different (p=0.24) to the values of 102.5${\pm}$9.6 mmHg, 300.3${\pm}$17.1 mmHg, 321.6${\pm}$23.7 mmHg, 303.4${\pm}$27.4 mmHg, and 273.5${\pm}$25.9 mmHg read from group B. Nonetheless, the arterial blood partial pressure of oxygen values appear to be somewhat higher in dogs that were given oxygen using the imported oxygen concentrator. Conclusions: From these results the prototype oxygen concentrator developed appears to function relatively satisfactorily compared to the imported, established model, but may be criticized for the excessive noise generated and poor long-term endurance or consistency, which need improvement.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.4
• /
• pp.313-321
• /
• 2017

$PM_{10}$ and $PM_{2.5}$ were collected at the Gosan Site on Jeju Island from 2013 to 2015, and their ionic and elemental species were analyzed to examine the variations in their chemical compositional characteristics related to different meteorological conditions. Concentrations of nss-$SO_4{^{2-}}$ and $NH_4{^+}$ were respectively 6.5 and 4.7 times higher in the fine particle mode ($PM_{2.5}$) compared to the coarse particle mode ($PM_{10-2.5}$), however $NO_3{^-}$ concentrations were 2.4 times higher in the coarse mode compared to the fine particle mode. During Asian dust days, the concentrations of nss-$Ca^{2+}$ and $NO_3{^-}$ increased to 8.2 and 5.0 times higher in $PM_{10}$, and 3.5 and 6.0 times higher in $PM_{2.5}$, respectively. During haze days, the concentrations of secondary pollutants increased by 3.1-4.7 and 3.2-7.9 in $PM_{10}$ and $PM_{2.5}$, respectively, and they were, respectively, 1.2-2.1 and 0.9-2.1 times higher on mist days. The aerosols were acidified largely by sulfuric and nitric acids, and neutralized mainly by ammonia in the fine particle mode during the haze days, but neutralized by calcium carbonate in coarse particle mode during the Asian dust days. Clustered back trajectory analysis showed that concentrations of nss-$SO_4{^{2-}}$, $NO_3{^-}$, and $NH_4{^+}$ were relatively high when air masses travelled from China.

• Restorative Dentistry and Endodontics
• /
• v.37 no.2
• /
• pp.96-103
• /
• 2012

Objectives: This study evaluated the effect of camphorquinone (CQ)-amine ratio on the C=C double bond conversion of resins with binary and ternary photoinitiation systems. Materials and Methods: Two monomer mixtures (37.5 Bis-GMA/37.5 Bis- EMA/25 TEGDMA) with binary systems (CQ/DMAEMA in weight ratio, group A [0.5/1.0] and B [1.0/0.5]) and four mixtures with ternary system (CQ/OPPI/DMAEMA, group C [0.1/1.0/0.1], D [0.1/1.0/ 0.2], E [0.2/1.0/0.1] and F [0.2/1.0/0.2]) were tested: 1 : 2 or 2 : 1 CQ-amine ratio in binary system, while 1 : 1 ratio was added in ternary system. The monomer mixture was cured for 5, 20, 40, and 300 sec with a Demetron 400 curing unit (Demetron). After each exposure time, degree of conversion (DC) was estimated using Fourier transform infrared (FTIR) spectrophotometer (Nicolet 520, Nicolet Instrument Corp.). The results were analyzed by ANOVA followed by Scheffe test, with p = 0.05 as the level of significance. Results: DC (%) was expressed in the order of curing time (5, 20, 40, and 300 sec). Group A ($14.63{\pm}10.42$, $25.23{\pm}6.32$, $51.62{\pm}2.69$, $68.52{\pm}2.77$); Group B ($4.04{\pm}6.23$, $16.56{\pm}3.38$, $37.95{\pm}2.79$, $64.48{\pm}1.21$); Group C ($16.87{\pm}5.72$, $55.47{\pm}2.75$, $60.83{\pm}2.07$, $68.32{\pm}3.31$); Group D ($23.77{\pm}1.64$, $61.05{\pm}1.82$, $65.13{\pm}2.09$, $71.87{\pm}1.17$); Group E ($28.66{\pm}2.92$, $56.68{\pm}1.33$, $60.66{\pm}1.17$, $68.78{\pm}1.30$); Group F ($39.74{\pm}6.31$, $61.07{\pm}2.58$, $64.22{\pm}2.29$, $69.94{\pm}2.15$). Conclusion: All the monomers with ternary photoinitiation system showed higher DC than the ones with binary system, until 40 sec. Concerning about the effect of CQ-amine ratio on the DC, group A converted into polymer more than group B in binary system. However, there was no significant difference among groups with ternary system, except group C when cured for 5 sec only.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1881-1890
• /
• 2021

Particulate matter (PM) affects the human, ecosystems, and weather. Motorized vehicles and combustion generate fine particulate matter (PM_2.5), which can contain toxic substances and, therefore, requires systematic management. Consequently, it is important to monitor and predict PM_2.5 concentrations, especially in large cities with dense populations and infrastructures. This study aimed to predict PM_2.5 concentrations in large cities using meteorological and chemical variables as well as satellite-based aerosol optical depth. For PM_2.5 concentrations prediction, a random forest (RF) model showing excellent performance in PM concentrations prediction among machine learning models was selected. Based on the performance indicators R², RMSE, MAE, and MAPE with training accuracies of 0.97, 3.09, 2.18, and 13.31 and testing accuracies of 0.82, 6.03, 4.36, and 25.79 for R², RMSE, MAE, and MAPE, respectively. The variables used in this study showed high correlation to PM_2.5 concentrations. Therefore, we conclude that these variables can be used in a random forest model to generate reliable PM_2.5 concentrations predictions, which can then be used to assess the vulnerability of schools to PM_2.5.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.302-313
• /
• 2008

The purposes of this study are to investigate the concentration levels of fine particles, so called PM$_{2.5}$, to identify the affecting sources, and to estimate quantitatively the source contributions of PM$_{2.5}$. Ambient air sampling was seasonally carried out at two sites in Pohang(a residential and an industrial area) during the period of March to December 2003. PM$_{2.5}$ samples were collected by high volume air samplers with a PM$_{10}$ Inlet and an impactor for particle size segregation, and then determined by gravimetric method. The chemical species associated with PM$_{2.5}$ were analyzed by inductively coupled plasma spectrophotometery(ICP) and ion chromatography(IC). The results showed that the most significant season for PM$_{2.5}$ mass concentrations appeared to be spring, followed by winter, fall, and summer. The annual mean concentrations of PM$_{2.5}$ were 36.6 $\mu$g/m$^3$ in the industrial and 30.6 $\mu$g/m$^3$ in the residential area, respectively. The major components associated with PM$_{2.5}$ were the secondary aerosols such as nitrates and sulfates, which were respectively 4.2 and 8.6 $\mu$g/m$^3$ in the industrial area and 3.7 and 6.9 $\mu$g/m$^3$ in the residential area. The concentrations of chemical component in relation to natural emission sources such as Al, Ca, Mg, K were generally higher at both sampling sites than other sources. However, the concentrations of Fe, Mn, Cr in the industrial area were higher than those in the residential area. Based on the principal component analysis and stepwise multiple linear regression analysis for both areas, it was found that soil/road dust and secondary aerosols are the most significant factors affecting the variations of PM$_{2.5}$ in the ambient air of Pohang. The source apportionments of PM$_{2.5}$ were conducted by chemical mass balance(CMB) modeling. The contributions of PM$_{2.5}$ emission sources were estimated using the CMB8.0 receptor model, resulting that soil/road dust was the major contributor to PM$_{2.5}$, followed by secondary aerosols, vehicle emissions, marine aerosols, metallurgy industry. Finally, the application and its limitations of chemical mass balance modeling for PM$_{2.5}$ was discussed.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.514-525
• /
• 2002

The analysis of heavy metals associated with both PM2.5 and PM10 fraction of aerosols was made from a northeast region of Seoul during the spring period of 2001. The mean concentrations of fine (PM2.5), coarse (PM10-PM2.5), and PM10 fraction were observed as 49.3${\pm}$29.2, 50.5${\pm}$35.0, and 95.5${\pm}$46.1 ${\mu}g$/m$^3$, respectively during this study period. According to the results of enrichment factor (EF) analysis between different particle fractions, major elements (including Fe, Ca, Na, and K) were found to exhibit EF values of less than 10. However, heavy metal components (like Zn and Pb) showed very high EF values. Comparison of fine/coarse (F/C) concentration ratio showed that Zn, Cr, Pb, and Ni have higher ratio values than others. The metallic composition of particles was also compared on both absolute and relative terms. The results of our analysis showed an evidence that the increase in the total metallic contents is prominent during the spring period due mostly to the Asian Dust event.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.5
• /
• pp.494-503
• /
• 2011

Fine particles ($PM_{2.5}$) were collected and analyzed from December 2005 through December 2009 in Chuncheon, Korea to investigate the long-term trend of $PM_{2.5}$ concentrations. Also $PM_{10}$ concentrations were collected from Environmental Monitoring System operated by Ministry of Environment. Average concentrations of $PM_{2.5}$ and $PM_{10}$ were 30.5 and 58.2 ${\mu}g/m^3$, respectively. Both $PM_{2.5}$ and $PM_{10}$ were significantly affected by meteorological factors including wind speed, wind direction and precipitation. They generally decreased as wind speed increased (p=0.000), and increased when there was a prevailing westerly wind. Low concentrations of $PM_{2.5}$ were observed during rainy days while high concentrations were shown when fog, mist and/or haze occurred.

• Journal of Embryo Transfer
• /
• v.31 no.1
• /
• pp.19-25
• /
• 2016

This study was conducted to evaluate the effects of type of culture media (BM, G2, OS, TCM, and MEM) on B6D2F1 mice oogenesis. In the present study, B6D2F1/CrljOri $F_1$ mice were utilized in order to maximize oogenesis. Also we used TCM-199, Dulbecco's medified Eagle's medium (DMEM), embryo culture medium (Fertilization medium, Cleavage medium, Blastocyst medium), G series medium and One step medium. In vitro maturation was highest in BM followed by the order of OS, MEM, TCM and G2 ($90{\pm}2.8%>88{\pm}3.2%>85{\pm}4.9%>78{\pm}10.2%>64{\pm}7.7%$, respectively). To note, the G2 group was statistically different compared to other groups (p<0.05). On the other hand the fertilization rate was highest in the G2 group followed by BM, OS, TCM, and MEM ($87{\pm}7.2%>85{\pm}6.9%>74{\pm}14.0%>71{\pm}13.8%>2{\pm}1.4%$, respectively). The MEM group was significantly lower compared to other groups (p<0.05). The developmental rate was highest in the OS group followed by the G2 group and the BM group albeit no statistical significance was noted ($73{\pm}11.6%>71{\pm}9.2%>66{\pm}10.4%$). Of note, all cells of the TCM and MEM groups were died during embryonic development. The zona hatched rate ($51{\pm}9.8%$ vs. $50{\pm}9.1%$ vs. $47{\pm}7.2%$ for BM, G2, and OS respectively) and attached rate ($45{\pm}12.3%$ vs. $38{\pm}16.1%$ vs. $37{\pm}11.5%$ for BM, G2, and OS respectively) were not different amongst groups. No difference was found in total cell numbers ($74{\pm}13.9$ vs. $64{\pm}9.2$ vs. $76{\pm}6.7$ for BM, G2, and OS respectively), ICM cell numbers ($20{\pm}1.9$ vs. $14{\pm}1.8$ vs. $15{\pm}2.1$), TE cell numbers ($55{\pm}12.5$ vs. $49{\pm}10.7$ vs. $61{\pm}5.9$), % ICM ($30{\pm}2.8%$ vs. $24{\pm}7.0%$ vs. $22.8{\pm}2.2%$) and ICM:TE ratio ($1:2{\pm}0.5$ vs. $1:3.1{\pm}0.8$ vs. $1:3.1{\pm}0.5$) amongst groups. In summary, these results can provide fundamental data to maximize culture condition for in vitro fertilization on B6D2F1 mice.

• Journal of Embryo Transfer
• /
• v.22 no.2
• /
• pp.107-110
• /
• 2007

본 연구는 BPA 및 nicotine 첨가 농도와 배양 시간이 돼지 난자의 체외성숙에 미치는 영향을 조사하였다. $0.02{\sim}10.0mM$ BPA와 $0.5{\sim}10.0mM$ nicotine이 첨가된 TCM-199배양액에서 $40{\sim}52$시간 난자를 배양했을 때 체외성 숙율을 조사하였다. BPA농도가 높을수록 체외성숙율이 유의적으로 낮게 나타났다. $0.05{\sim}10.0nM$ BPA를 첨가한 TCM-199 배양액에서 난자를 44시간 배양했을 때 체외성숙율은 각각 $40.0{\pm}4.1%,\;24.0{\pm}4.7%,\;10.0{\pm}5.3%,\;6.0{\pm}3.2%,\;0.0{\pm}0.0%$로서 첨가 농도가 증가할수록 낮은 체외성숙율을 나타냈다. 난자를 $0.5{\pm}10.0mM$ nicotine를 첨가한 TCM-199 배양액에서 44시간 배양했을 때 체외성숙율은 각각 $44.0{\pm}4.5%,\;24.0{\pm}4.2%,\;18.0{\pm}4.9%,\;8.0{\pm}2.2%,\;0.0{\pm}0.0%$로서 대조군$(52.0{\pm}4.5%)$에 비해 낮은 체외성숙율을 나타냈다. 난자를 0.5 nM BPA와 2.5 mM nicotine을 첨가한 TCM-199에서 $40{\sim}52$시간 배양했을 때 체외성숙율은 $8.3{\pm}2.1%{\sim}26.0{\pm}3.9%$ 및 $11.2{\pm}2.2%{\sim}28.6{\pm}3.9%$로서, 44시간 배양이 다른 배양시간보다 가장 높은 체외성숙율을 나타냈다.

• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.47-57
• /
• 2019

Purpose: This paper aims to investigate the concentration of fine particulate matter (PM2.5) in the Seoul area by predicting unhealthy days due to PM2.5 and comparing the regional differences. Methods: The extreme value theory is adopted to model and compare the PM2.5 concentration in each region, and each best model is selected through the goodness of fitness test. The maximum likelihood estimation technique is applied to estimate the parameters of each distribution, and the fitness of each model is measured by the mean absolute deviation. The selected model is used to estimate the number of unhealthy days (above $75{\mu}g/m^3$ PM2.5 concentrations) in each region, with which the actual number of unhealthy days are compared. In addition, the level of PM2.5 concentration in each region is analyzed by calculating the return levels for periods of 6 months, 1 year, 3 years, and 5 years. Results: The Mapo (MP) area revealed the most unhealthy days, followed by Gwanak (GW) and Yangcheon (YC). On the contrary, the number of unhealthy days was low in Seodaemun (SDM), Songpa (SP) and Gangbuk (GB) areas. The return level of PM2.5 was high in Gangnam (GN), Dongjak (DJ) and YC. It will be necessary to prepare for PM2.5 than other regions. On the contrary, Gangbuk (GB), Nowon (NW) and Seodaemun (SDM) showed relatively low return levels for PM2.5. However, in most of the regions of Seoul, PM25 is generated at a very poor level ($75{\mu}g/m^3$) every 6months period, and more than $100{\mu}g/m^3$ PM2.5 occur every 3 years period. Most areas in Seoul require more systematic management of PM2.5. Conclusion: In this paper, accurate prediction and analysis of high concentration of PM2.5 were attempted. The results of this research could provide the basis for the Seoul Metropolitan Government to establish policies for reducing PM2.5 and measuring its effects.