• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.487-493
• /
• 2012

We present interferometric modulators that reproduce RGB colors through the selective actuation of mechanically coupled mirror arrays having identical air gaps. The conventional transmittive interferometric modulators need additional backlights, which leads to high power consumption. The previous reflective interferometric modulators using ambient lights need three different air gaps for reproducing the three RGB colors, thus giving rise to process complexity. For process simplicity, we propose the use of reflective interferometric modulators that are capable of producing green, blue, red, and black colors with the aid of mechanically coupled mirrors with identical air gaps. In an experimental study, the present interferometric modulators reproduce green, blue, and red colors at the switching modes (000), (010), and (101). The spectrum peaks for the colors are measured at the wavelengths $511{\pm}5nm$, $478{\pm}3nm$, and $644{\pm}9nm$, respectively, with the bandwidths being $60{\pm}1nm$, $45{\pm}2nm$, and $105{\pm}4nm$, respectively; further, the maximum intensities of the colors are $77{\pm}5%$, $73{\pm}2%$, and $81{\pm}5%$, respectively. The black spectrum is measured below the intensity of $27{\pm}0%$. Thus, we experimentally demonstrate the color reproduction capability of interferometric modulators fabricated by using a simple process.

• Journal of Environmental Science International
• /
• v.17 no.10
• /
• pp.1121-1127
• /
• 2008

The free-living amoeba and Acanthamoeba sp. are widely distributed in fresh water, soil, air and dust in the world. We studied distribution of amoeba from low Nakdong River(Mulgum and Maeri) and removal efficiency in water treatment process of Busan metropolitan city. During this investigation, water quality showed pH $7.4{\sim}9.6({\pm}1.1)$, water temperature $2.0{\sim}29.0({\pm}17)^{\circ}C$, turbidity $4.8{\sim}27.4({\pm}11.0)$ NTU, chlorophyll-a $10.3{\sim}109.0({\pm}44.3)\;mg/m^{3}$, BOD $1.7\sim4.9({\pm}2.6)$ mg/L, COD $3.1\sim-6.9({\pm}5.0)$ mg/L and total coliform $17\sim920({\pm}200.5)$ MPN/100 mL. The free-living amoeba were detected highly than Acanthamoeba sp., 11 out of 22 in raw water samples were positive (50%) for Acanthamoeba sp. from February 2005 to December 2005. The seasonal characteristics of tree-living amoeba and Acanthamoeba sp. in raw water were mainly distributed through the spring to the early fall. When tree-living amoeba and Acanthamoeba sp. were passed through the water treatment of pilot-plant, approximately 80% was sure to be removed through pre-ozonation, sedimentation, send filtration. 100% was removed after post-ozonation process. All of the isolated amoebas from Nakdong River were Acanthamoeba sp. AC311 18S ribosomal RNA gene with 98% nucleotide sequence homology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.725-732
• /
• 2016

To develop large-scale complex systems, many organizations have attempted to improve the processes specified in systems engineering (SE) and project management (PM) by adopting CMMI (Capability Maturity Model Integration). On the other hand, most domestic organizations that already acquired CMMI level 3 have focused on SE&PM practices while providing less investment in building up the environment for institutionalizing those processes. In such organizations, the process maturity without advancing to institutionalization can be neither enhanced nor maintained. To resolve the problem, the following remedies can be suggested. A standard process should first be defined to meet the business mission of the organization and to carry out the process successfully, the people should be properly trained and the appropriate tools be provided. In this study, a maturity model to accomplish institutionalization was examined based on the aforementioned P-P-T (Process-People-Tool) concept. The model proposed would be useful in developing strategies and plans for process institutionalization when the organizations are in the preparation stages for a CMMI certificate or have already acquired one.

• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.1-10
• /
• 2015

The purpose of this study was to establish the critical limit of CCP (Critical Control Point) of a HACCP (Hazard Analysis Critical Control Point) system used in the production of seasoned laver products. The hazard analysis examined microbial evaluations and developed a HACCP management plan for the heating process. The results were determined to be capable of reducing the biological element of CCP via the secondary roasting process. This study examined general bacteria and pathogenic microorganisms such as Escherichia coli, Staphylococcus aureus, Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus, and Bacillus cereus at temperatures ranging from $170^{\circ}C$ to $230^{\circ}C$ and for 3.0 to 5.5 seconds at a time. Before the secondary roasting process, pathogenic microorganisms were all negative, although the presence of general bacteria was still detected. General bacteria was reduced to $1.0{\times}10CFU/g$ after the temperature was set at $230^{\circ}C$ for a period of 5.5 seconds. In conclusion, it suggested that a HACCP plan was necessary for management standard and systematic approach in the establishment of critical limit, problem resolution, verification method, education, and records management through a secondary roasting process.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.126-127
• /
• 2006

In this study, nano grain W is fabricated by Severe Plastic Deformation-Powder Metallurgy (SPD-PM) process. W powder and W-Re powder mixtures are processed by SPD-PM process, a Mechanical Milling (MM) process. As results, a nano grain structure, whose grain size is approximately 20nm, is obtained in W powder after MM for 360ks. A nano grain W compact, whose grain size 630nm, has excellent deformability above 1273K. A nano grain W-10Re compact is composed of equiaxed grain, a grain growth is restrained and has low dislocation density after the large deformation; therefore it is considered that W-Re compact shows superplasticity.

• Journal of Powder Materials
• /
• v.28 no.2
• /
• pp.164-172
• /
• 2021

Titanium is the ninth most abundant element in the Earth's crust and is the fourth most abundant structural metal after aluminum, iron, and magnesium. It exhibits a higher specific strength than steel along with an excellent corrosion resistance, highlighting the promising potential of titanium as a structural metal. However, titanium is difficult to extract from its ore and is classified as a rare metal, despite its abundance. Therefore, the production of titanium is exceedingly low compared to that of common metals. Titanium is conventionally produced as a sponge by the Kroll process. For powder metallurgy (PM), hydrogenation-dehydrogenation (HDH) of the titanium sponge or gas atomization of the titanium bulk is required. Therefore, numerous studies have been conducted on smelting, which replaces the Kroll process and produces powder that can be used directly for PM. In this review, the Kroll process and new smelting technologies of titanium for PM, such as metallothermic, electrolytic, and hydrogen reduction of TiCl₄ and TiO₂ are discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.894-899
• /
• 2010

We coordinated the experiments with ozone pretreatment and two-phase anaerobic digestion using solid-liquid separation to raise the efficiency of sludge volume reduction and obtained the following results. The pre-treatment with ozone reduced the solid concentration in the average of TSS $8.3{\pm}2.0%$ TSS and $9.2{\pm}}2.8%$ VSS. Of the organic material, TCOD decreased $5.1{\pm}2.4%$, but SCOD showed $72{\pm}6.5%$ increased, which was due to destruction of the cell wall and dissolution of icell media by the powerful oxidative stress of ozone. During the two-phase anaerobic digestion process, we achieved the reduction of $21.5{\pm}3.4%$ TSS, $20.2{\pm}8.4%$ VSS, $32.1{\pm}7.9%$ TCOD and $22.1{\pm}7.2%$ SCOD in average. The maximum methane gas production were 177.6 mL per g TSS, 210.8 mL per g VSS, 127.0 mL per g TCOD and 1452.0 mL per g SCOD, respectively. Solid material reduction through the two-phase anaerobic digestion and MLE (Modified Ludzack-Ettinger) processes were 93.8% of TSS and 92.0% of VSS. We concluded that suggested two-phase anaerobic digestion and MLE process could achieve the reasonable production of biogas and a maximum reduction of the sludge volume.

• Korean Journal of Cognitive Science
• /
• v.22 no.2
• /
• pp.145-172
• /
• 2011

Prospective memory (PM) is memory for activities to be performed in the future, such as remembering to purchase a piece of fruit on the way home or remembering to give someone a telephone message. Theoretically, PM retrieval can be accomplished either by controlled monitoring of intended action or by a more automatic process that spontaneously responds to the presence of intended event. The present study examined the effect of meta-cognitive awareness in PM retrieval process. In Experiment 1, we manipulated PM condition with a salient cue to stimulate participants' meta-cognitive awareness. Results showed the salient cue condition spontaneously triggered remembering to perform an intended action. In Experiment 2, we manipulated participants' meta-cognitive awareness about PM task difficulty and about the degree to which cognitive capacity is required to realize the PM task. Results showed that PM retrieval process varied with meta-cognitive awareness (i.e., more resources were allocated if the PM task was expected to be difficult). These results imply that participants' meta-cognitive awareness play an important role in PM retrieval process.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.1
• /
• pp.10-18
• /
• 2011

Ergonomic product design considering users' natural use motion is of importance to improve the usability and satisfaction of a product. A five-step process of product design was developed in the present study by measuring and analyzing users' natural product-use motion with a motion capture system. The developed process was applied to ergonomic design improvement of a half guard installation part of refrigerator; new guard designs (diagonal and arc shape) were developed with the process and evaluated in terms of validity during the development as two measures (task satisfaction and similarity of natural motion). According to the evaluation result, the satisfaction at putting in- and out-task of new guard designs ($6.3{\pm}0.5$ points) was significantly higher than that of existing guard designs ($3.3{\pm}1.0$ points); the difference between natural motion and product-use motion in new guard designs ($1.0{\pm}0.3cm$) was significantly less than that of existing guard designs ($2.0{\pm}0.2cm$). The proposed process of natural motion analysis and product design is applicable to ergonomic product design and evaluation.

• Communications for Statistical Applications and Methods
• /
• v.8 no.3
• /
• pp.697-709
• /
• 2001

In this paper we study two vector-valued process capability indices $C_{p}$=($C_{px}$, $C_{py}$ ) and C/aub pm/=( $C_{pmx}$, $C_{pmy}$) considering process capability indices $C_{p}$ and $C_{pm}$ . First, two asymptotic distributions of plug-in estimators $C_{p}$=($C_{px}$, $C_{py}$ ) and $C_{pm}$ =) $C_{pmx}$, $C_{pmy}$) are derived.. With the asymptotic distributions, we propose asymptotic confidence regions for our indices. Next, obtaining the asymptotic distributions of two bootstrap estimators $C_{p}$=($C_{px}$, $C_{py}$ )and $C_{pm}$ =( $C_{pmx}$, $C_{pmy}$) with our bootstrap algorithm, we will provide the consistency of our bootstrap for statistical inference. Also, with the consistency of our bootstrap, we propose bootstrap asymptotic confidence regions for our indices. (no abstract, see full-text)see full-text)e full-text)