• Journal of Veterinary Clinics
• /
• v.20 no.1
• /
• pp.104-109
• /
• 2003

This study was performed to evaluate the postoperative heating process according to lameness degree, swelling, and muscle atrophy after femoral head and neck ostectomy on Retriever dogs with hip dysplasia and hindleg lameness. Femoral head and neck ostectomy (FHO) was performed for the repair of hip dysplasia in 4 Retriever dogs (5 hips) referred in veterinary medical teaching hospital of college of veterinary medicine, Konkuk University. Age (Mean $\pm$ SD) of patients was 10.3 $\pm$ 3.0 months (range,7 to 16 months) and body weight (Mean $\pm$ SD) was 28.2 $\pm$ 3.4 kg (range, 25 to 34 kg). After FHO, all cases are treated with carprofen (2.2 mg/kg, PO bid, tapering at interval 1-2 weeks) and physical therapy including passive range-of-motion exercises. In all cases, lameness degree was showed V at the next day after surgery, IV at 5 to 7 days, II-III at 30 to 35 days, II at 60 days, and I at 105 to 114 days. These results suggested that femoral head and neck ostectomy was able to be performed on large breed dogs with hip dysplasia and hindleg lameness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2933-2938
• /
• 2014

In this paper, the FLL(Frequency Locked Loop) circuit using current conveyor circuit is designed by $0.35{\mu}m$ CMOS process. The FLL circuit is built in a frequency divider, a frequency-to-voltage converter, a voltage subtractor and a oscillator and the circuit blocks have a symmetric structure to improve a reliability characteristics with a process variation. From the simulation results, the variation rate of output frequency is about less than ${\pm}1%$ when the channel length, channel width, resistance and capacitance are varied ${\pm}5%$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.3
• /
• pp.203-208
• /
• 2009

Doenjang (Korean fermented soybean paste) is a unique fermented food in Korea. It has been traditionally manufactured from soybeans, by Jang Yang process. We focused on the newly formed compound in highly aged Doenjang and its biological activity. One new o-dihydroxyisoflavone, 7,3',4'-trihydroxyisoflavone and two known o-dihydroxyisoflavone derivatives were isolated from 5-year-old Doenjang and evaluated as potent antioxidant and whitening effect by comparing with other known isoflavone. 7,8,4'-Trihydroxyisoflavone (compound 1), 7,3',4'-trihydroxyisoflavone (compound 2) and 6,7,4'-trihydroxyisoflavone (compound 3) inhibited DPPH (diphenyl-1-picrylhydrazyl) formation by 50 % at a concentration of $21.5{\pm}0.2$, $28.7{\pm}0.4$ and $32.6{\pm}0.6$ ($IC_{50}$) respectively, whereas daidzein showed weak DPPH radical scavenging activity. In superoxide scavenging effect were measured in one assay. Compound 1 ($IC_{50}=18.10{\pm}0.2{\mu}M$) and 2 ($IC_{50}=10.54{\pm}0.4{\mu}M$) show significant inhibitory activity and greater effect than L-ascorbic acid. But compound 3 and daidzein showed lower inhibition activity. Also, o-dihydroxyisoflavone derivatives evaluated as potent inhibitors on tyrosinase activity and melanin formation in melan-a cells. Compound 1 ($IC_{50}=11.21{\pm}0.2{\mu}M$), compound 2 ($IC_{50}=5.23{\pm}0.6{\mu}M$) exhibited significant inhibitory effect on tyrosinase activity. Furthermore, those compounds are significantly suppressed the cellular melanin formation by 50 % at a concentration of $12.23{\pm}0.7{\mu}M$ (1) and $7.83{\pm}0.7{\mu}M$ (2). This result suggests that 7,3',4'-trihydroxyisoflavone from highly aged Doenjang could be used as an active ingredient for cosmetics.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.380-387
• /
• 2013

This study was performed to examine the increasing biological activities of both nerve growth factor induction and anti-aging activity of gastrodia (Gastrodia elata) with fermentation process. Antioxidant activities, taken in the fermenting, were investigated to verify utility value of gastrodia for functional food and cosmetics. Fermented gastrodia extracts showed higher antioxidant activities than dried gastrodia extracts. During the routine check of all the practical use potential as functional food, inhibition effect of angiotensin converting enzyme (ACE) and xanthine oxidase (XOase) was tested among water extracted dried gastrodia (WEDG), water extracted fermented gastrodia (WEFG), 70% ethanol extracted dried gastrodia (EEDG) and 70% ethanol extracted fermented gastrodia (EEFG). DPPH was shown as WEDG = $64.14{\pm}0.89%$, WEFG = $66.21{\pm}1.03%$, EEDG = $82.25{\pm}0.52%$, and EEFG = $82.36{\pm}2.37%$. ABTS was shown as WEDG = $54.15{\pm}1.37%$, WEFG = $60.24{\pm}2.25%$, EEDG = $59.18{\pm}1.86%$, and EEFG = $77.17{\pm}4.23%$. Therefore, ACE activity was dramatically inhibited by EERG while there was no difference of XOase inhibition between EEFG and EERG. Nerve growth factor (NGF) activity was measured and indicated about 40% increased neurite growth effect. To conclude, biologically active compounds of gastrodia were increased by fermentation process. It seems to be that ferment gastrodia enhance the use ranges from functional food to fuctional cosmetics, and to all processing industry.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.73-81
• /
• 2006

Heat treatment condition for the stabilization of foamed glass block through the foaming process of the hydrolized waste glass was investigated and scale-up test for the manufacturing of foamed glass was also attempted for the actual foaming process. Proper heat treatment condition was quenching from the foaming temperature to $550{\sim}600^{\circ}C$ for stabilization, and then annealing from stabilization temperature to $200^{\circ}C$ and holding up at $200^{\circ}C$ for removal thermal stress, and then annealing to the room temperature with cooling speed of $0.3^{\circ}C/min$. Through this heat treatment conditions, foamed glass block with size of $250mm{\times}250mm{\times}90mm$ was produced successfully. The properties of this foamed glass block showed density of $0.28{\pm}0.06g/cm^3$, thermal conductivity of $0.048{\pm}0.005kcal/hm^{\circ}C$, moisture absorption of $0.5{\pm}0.09vol%$, linear expansion coefficient of $(8.6{\pm}0.2){\times}10^{-6}m/m^{\circ}C$($400^{\circ}C$), flexural strength of $15.0{\pm}0.6kg/cm^2$, and compression strength of $39.5{\pm}0.6kg/cm^2$.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.123-127
• /
• 2014

We developed a digital 3-axis flux-gate magnetometer for magnetic field signal measurement from warship during demagnetizing and degaussing processes. For the magnetometer design, we considered following points; the distance between magnetic field measurement station and magnetometer located under sea is about several 100 m, the magnetometer is exposed to magnetic field of ${\pm}1mT$ during demagnetizing process, and magnetometer is located under the sea about 30 m depth. To overcome long distance problem, magnetometer could be operated on wide input supply voltage range of 16~36 V using DC/DC converter, and for the data communication between the magnetometer and measurement station a RS422 serial interface was employed. To improve perming effect due to the ${\pm}1mT$ during demagnetizing process, magnetometer could be compensated external magnetic field up to ${\pm}1mT$ but magnetic field measuring rang is only ${\pm}100{\mu}T$. The perming effect was about ${\pm}2nT$ under ${\pm}1mT$ external magnetic field. The magnetometer was tested water vessel with air pressure up to 6 bar for the sea water pressure problems. Linearity of the magnetometer was better than 0.01 % in the measuring range of ${\pm}0.1mT$ and noise level was $30pT/\sqrt{Hz}$ at 1 Hz.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.131-140
• /
• 2005

To investigate secondary carbonaceous species within PM$_{10}$ and PM$_{2.5}$ in Seoul urban Metropolitan Area (SMA), Korea. atmospheric particulate matters samples were collected at two sites of SMA at UOS (The University Of Seoul station) sites and IHU (InHa University of Incheon station) during the period of 4 to 14 January and 12 to 22 May, 11 to 15 August 2004, and their characteristics were qualitatively discussed. during January and May and August of 2004. Daily average mass concentration 0.095 mg/㎥ in PM$_{10}$ and 0.053 mg/㎥ in PM$_{2.5}$ for mass respectively. were observed in SMA. The concentrations of carbonaceous species contributed 18.4% and 16.4% of PM$_{2.5}$ and PM$_{10}$ during the sampling period, respectively, of which OC accounted for 68% and 52% more of the total carbon (TC). OC and EC concentrations and their mass percentages were higher in PM$_{2.5}$ than in PM$_{10}$ which could be attributed to generation process. Organic aerosols would constitute up to 38% of PM$_{2.5}$ based on the evaluation of 1.6 for the ratio of OC to organic particulate. Secondary organic carbon (SOC) were estimated to be more than 13% and up to 68% of total OC based on the minimum OC/EC ratio of 1.06/1.11 using least square method. Comparisons of OC and EC with trace elements. As results of carbonaceous species analysis, the dominant factor in view of fine particle (PM$_{10}$/PM$_{2.5}$) is primary emission source such as mobile, fossil fuel combustion etc. during winter time in SMA. But in summer periods, remarkable fine particle increasing factor was secondary organic carbon dependent to photochemical reaction. reaction.n. reaction.

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.189-195
• /
• 2012

A novel PM (powder metallurgy) steel for automotive power-train gear components was developed to reduce manufacturing cost, while meeting application requirements. The high-density PM steel was manufactured by mixing using special Cr-Mo atomized iron powders, high-pressure compaction, and sintering. Tensile strength, charpy impact, bending fatigue, and contact fatigue tests for the PM steel were carried out and compared to conventional forged steel. Pinion gears for auto-transmission were also manufactured by helical pressing, sintering, and surface densification process. In order to evaluate the durability of the PM parts, auto-transmission durability tests were performed using dynamometer tests. Results showed that the PM steel fulfilled the requirements for pinion gears indicating suitable tensile, bending fatigue, contact fatigue strengths and improved gear tooth profile. The PM gears also showed good performance during the transmission durability tests. As a result, the PM gears showed significant potential to replace the conventional forged steel gears manufactured by tooth machining (hobbing, shaving, and grinding) processes.

• Journal of the Korean Society of Systems Engineering
• /
• v.8 no.1
• /
• pp.9-19
• /
• 2012

The Light Rail Transit Project is a large scaled project which takes several years in building a system. After construction, LRT system is operating for several tens of years. For these characteristics, the right application of systems engineering to LRT project greatly effects the project success. In this paper, we present systems engineering application model to LRT project i.e. SELRT which include systems engineering technical process, core technology management process, project support process. SELRT also has a module for the exchange of outputs in SE tool and PM tool. Systems engineering processes in SELRT mainly base on ISO/IEC 15288. In future, we expand the range of SE processes and improve the usability in SELRT. We expect that this model will contribute to improve the efficiency in LRT project and to success the LRT project.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.69-79
• /
• 1999

The main objective of this study are to propose two methods that would be a comprehensive measure of evaluation for non-normal process capability with Beta distributions. First method is introduced using process capability index $C_{psk}$ by the Pearson system and Johnson system. The Pearson system and the Johnson System selected for process capability index calculation have a equivalent result of this study that the ranking of the seven indices in terms of sensitivity to departure of the process median from the target value from the most sensitive one up to the least sensitive are $C^{*}_{pm}$ , $C_{psk}$ , $C_{s}$ , $C_{pmk}$ , $C_{pm}$ , $C_{pk}$ , $C_{p}$ . Second method show using the percentage nonconforming by the Pearson, Johnson and Burr functions. In thus study, we find that the Pearson system and the Burr system are a reasonable method to estimate percentage nonconforming. But, the exact procedure for deriving this estimate will be based on Beta distribution. Accordingly, if a process is not normally distributed , but normal-based techniques are used serious errors can result.