• 한국전자통신학회논문지
• /
• 제9권3호
• /
• pp.279-284
• /
• 2014

본 논문에서는 p-채널 저온 다결정 실리콘 박막 트랜지스터의 문턱전압 변동을 보상할 수 있는 새로운 OLED 화소회로를 제안하였다. 제안한 5-TFT OLED 화소회로는 4개의 스위칭 박막 트랜지스터, 1개의 OLED 구동 박막 트랜지스터 및 1개의 정전용량으로 구성되어 있다. 제안한 화소회로의 한 프레임은 초기화 구간, 문턱전압 감지 및 데이터 기입 구간, 데이터 유지 구간 및 발광 구간으로 나누어진다. SmartSpice 시뮬레이션 결과, 구동 트랜지스터의 문턱전압이 ${\pm}0.25V$ 변동 시 최대 OLED 전류의 오차율은 -4.06%이였고 구동 트랜지스터의 문턱전압이 ${\pm}0.50V$ 변동 시 최대 OLED 전류의 오차율은 9.74%였다. 따라서 제안한 5T1C 화소회로는 p-채널 다결정 실리콘 박막 트랜지스터의 문턱전압 변동에 둔감하여 균일한 OLED 전류를 공급함을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.987-989
• /
• 2006

1.52" $130(RGB){\times}130$ full color PM OLED device with $70\;{\mu}m{\times}210\;{\mu}m$ of sub-pixel pitch was fabricated using shadow mask method for metal cathode deposition. Instead of conventional patterning process to form cathode separator via photolithography, regularly patterned shadow mask was applied to deposit metal cathode in this OLED display. Metal cathode was patterned via 2-step evaporation using shadow mask with shape of rectangular stripe and its alignment margin is $2.5\;{\mu}m$. Technical advantages of this method include reduction of process time according to skipping over photolithographic process for cathode separator and minimizing pixel shrinkage caused by PR cathode separator as well as improving lifetime of OLED device.

• 대한전자공학회논문지SP
• /
• 제47권1호
• /
• pp.62-72
• /
• 2010

PM OLED는 차세대 디스플레이의 하나로 많은 애플리케이션에 사용되고 있다. PM OLED를 애플리케이션에 적용하는데 있어 가장 큰 문제는 전력 소모와 제품 수명을 꼽을 수 있다. PM OLED 시장의 확대를 위해 이를 개선하기 위한 노력이 패널과 회로 측면에서 이루어지고 있다. 전력소모와 제품 수명은 상호 연관 관계가 있어, 회로 상에서 전력 소모를 줄이면 인가 전류가 감소하여 제품 수명이 향상된다. 그러므로 전력 소모를 회로적으로 보완하는 방법을 적용하여 구동 방식을 개선함으로 전력 소모 감소와 제품 수명 향상이 가능하다. 종래 Row-to-Row 방식을 개선하여 여러 Row를 동시에 구동하는 기술을 적용하면 전력 소모를 감소 시키고 수명을 연장할 수 있다. 본 논문은 여러 Row를 동시에 구동하는 방식을 적용함에 있어 Row 별 Column 데이터에 대해 확률적 개념을 도입하여 유사성이 높은 Row를 하나의 Group으로 분리하고 Group별로 차별적으로 Row 구동 방식을 적용하여 전력을 감소하여 패널 수명을 향상하였다.

• 전기전자학회논문지
• /
• 제13권2호
• /
• pp.248-252
• /
• 2009

In this paper, analysis of a noise factor and an effective power strategy for the OLED dc-dc converter are described. One of the main reasons that one may not design the OLED power for dc-dc converter is that OLED's panel noise is composed of FFN(Frame Frequency Noise) and LFN(Line Frequency Noise). Into the bargain, FFN is caused by both the dc-dc (circuit) and driving circuit. It is hard to get rid of FFN, baeause FFN has very little results value for our ears. LFN is adjusted by analog compensation value. Actually, that is more important problem than FFN. It is known that voltage divider for OLED's mode variation is not good for compact power design. In the end, a circuit design for understanding OLED's noise and a novel muti-channel dc-dc converter were presented.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.196-201
• /
• 2016

We studied white tandem organic light-emitting diodes using blue and red phosphorescent materials. Optimized white single phosphorescent OLED was fabricated using CBP : FIrpic (12 vol.%, 9 nm) / CBP : $Ir(mphmq)_2acac$ : $Ir(ppy)_3$ (1 vol.%, 1 vol.%, 1 nm) as emitting layer (EML). The single phosphorescent OLED showed maximum current efficiency of 22.5 cd/A, white emission with a Commission Internationale de l'Eclairage (CIE) coordinates of (0.342, 0.37) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.339{\pm}0.008$, $0.371{\pm}0.001$) from 500 to $3,000cd/m^2$. Optimized white tandem phosphorescent OLED was fabricated using CBP : FIrpic (12 vol.%, 7 nm) / CBP : $Ir(mphmq)_2acac$ : $Ir(ppy)_3$ (1 vol.%, 1 vol.%, 3 nm) as EML. The tandem phosphorescent OLED showed maximum current efficiency of 49.2 cd/A, white emission with a CIE coordinates of (0.376, 0.366) at $1,000cd/m^2$, variation of CIE coordinates with ($0.375{\pm}0.004$, $0.367{\pm}0.002$) from 500 to $3,000cd/m^2$. Maximum current efficiency of tandem phosphorescent OLED was more twice as high as single phosphorescent OLED. Our results suggest that tandem phosphorescent OLED was possible to control CIE coordinates and produce excellent color stability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1255-1258
• /
• 2006

PM OLED has the line-disturbance when eyes can detect the driving line status in the shaking situation. It is closely related with the lighting intensity and the lighting time during the line driving. .In this paper we suggest the frame part method for eliminating lineflash appearance. Frame part is a driving method of PM OLED, which divides one frame into several inner-frame parts to reduce the color interference between closely related pixels and to lessen the lineflash appearance which disturbs viewer to perceive the images. Frame part groups one frame into several inner-frame parts and have inner-frame rate higher than the frame rate. Frame part could be used in most of applications in PM OLED systems to enhance the total performance of screen quality.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.704-710
• /
• 2015

We studied white organic light-emitting diodes using blue fluorescent and red phosphorescent materials. White single OLEDs were fabricated using SH-1 : BD-2 (3 vol.%) and CBP : $Ir(mphmq)_2(acac)$ (2 vol.%) as emitting layer (EML). The white single OLED using SH-1 : BD-2 (3 vol.% 8 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 22 nm) as emitting layer showed maximum current efficiency of 8.8 cd/A, Commission Internationale de l'Eclairage (CIE) coordinates of (0.403, 0.351) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.402{\pm}0.012$, $0.35{\pm}0.002$) from 500 to $3,000cd/m^2$. The white tandem OLED using SH-1 : BD-2 (3 vol.% 12 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 18 nm) showed maximum efficiency of 19.6 cd/A, CIE coordinates of (0.354, 0.365) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.356{\pm}0.016$, $0.364{\pm}0.002$) from 500 to $3,000cd/m^2$. Maximum current efficiency of the white tandem OLED was more twice as high as the single OLED. Our findings suggest that tandem OLED was possible to produce improved efficiency and excellent color stability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1206-1209
• /
• 2007

Both PM-OLEDs and AM-OLEDs are now in production. However, manufacturers are still concerned about life-time, voltage drift, operating voltage and efficiency in order to develop larger displays. Most material suppliers seem to be focussing on emitters and the benefits of introducing suitable charge transporters have been largely unexplored. OLED-T has developed a novel organic electron injector (Trade Name: EI-101) which evaporates at a very low temperature of $300^{\circ}C$ as opposed to the conventional LiF which requires $580^{\circ}C$. EI-101 has been found to increase the lifetime by up to 12%, reduce the voltage drift by up to 61% and increase the efficiency by up to 15%. The material can be handled in air and in situ Q-mass spectroscopy on extended thermal evaporation has confirmed its high stability for use in mass production.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.812-815
• /
• 2003

In this study, the MgO thin-film passivation layer was adopted to protect passive matrix organic light emitting diode(PMOLED) with the cathode separator from moisture and oxygen. Using the substrate rotate and tilt technique during the deposition, the organic and cathode layers were perfectly covered with MgO. And then, we analyzed the difference of the current-voltage and luminescence characteristics between passivated OLED of the MgO and non-passivated OLED. It was found that the number of dark spot generated from the degradated pixel was decreased owing to the Mgo thin-film passivation layer using the tilt ＆ rotate technique. And the half-life time passivated OLED was improved two times more. Thus, the MgO could be vaccum-deposited under the low temperature and had a merit that the organic layer was not much affected. We can consider that MgO thin film passivation method can be adopted to protect the OLED from moisture and oxygen and can offer the enhancement of lifetime.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.264-266
• /
• 2005

Manufacture of OLED device used thermal evaporation method. However thermal evaporation method has many defect as thermal damage of substrate, difficult of dopant rate control and low utilization of organic materials. so we suggest PLD(Pulsed Laser Deposition) method that solution of these problems. PLD method has many advantage as without thermal damage, easy indicate of deposition rate per one pulse and good utilization of organic materials. In this paper we apply the PLD method for manufacture of device so we present high efficiency device manufacture using PLD method that has good deposition uniformity, surface rough and deposition rate.