• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.742-752
• /
• 2015

The communications through the power lines are called as the PLC and this is a common name for the communication modes for the information delivery. This technology transmits the data through the power lines on which the information is stored with the form of high frequency signal. The characteristic of the frequency signal is that the signal can be separated from the power line through exclusive power line modem and transmitted to the terminal devices. In this paper, 'In-home Headcount' checking algorithm using Wi-Fi and taking above mentioned advantages is proposed, and the basic Technology for such Solitary Senior Citizen's Lonely Death monitoring system has been designed and implemented. The comparative analysis has been conducted in this paper with the test-operated and test bed-completed 'Hyosimi 119 Safety-Welfare System' which is still being tested since 2008. With the 'In-home Headcount Checking Algorithm', Wi-Fi connection/disconnection status and SSIDs of relevant Wi-Fis will be checked. We expect that our proposed method will become as the basic Technology which can prevent lonely deaths of elderly people living alone. Since the PLC technology can be normally implement all the functions used on internet anticipate that the technology could be applied to many areas to construct a new form of communication network.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.488-493
• /
• 2008

This paper represents a dual-mode type transmission technique for a high reliable narrow-band power line communication(PLC) modem, and its design and implementation of a system-on-chip(SoC). The proposed transmission technique is based on a Chirp modulation for the purpose of overcoming time variations of power line channel environments in the narrow-bandwidth of the frequency range of 95-145.5 kHz. The designed modem is fabricated utilizing a mixed 0.18 ${\mu}m$ CMOS technology. Especially, according to the power line channel environments the data transmission rate can be selectively changed into 2.5 kbps and 480 bps. The total hardware complexity of the implemented chip is about 50,000 gates, the power consumption is about 26mW, and the operating frequency is up to 5.12 MHz.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.31-33
• /
• 2010

The image communication system based on power line communication(PLC) that manages the status of workers in deteriorated. work environments such as high temperature and pressures as realtime is designed and implemented in this paper. The major design considerations for system design are such that the adaptation of simple architecture, simplicity of installation and movement, tolerances about high temperature and pressures, transmission of high quality image under various noise environments.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.132-135
• /
• 2000

In this paper, we propose to exploit a multi-code CDMA scheme for power line communication (PLC) systems, and its performance on non-Gaussian impulse and harmonic noises is presented. The proposed multi-code CDMA scheme utilizes convolutional coding and block interleaving to combat with the non-Gaussian noises, and simulation results indicate effective alleviation of these noises, and thus significant bit error rate improvement by the proposed scheme even under strict restriction of frequency band allowed in PLC systems.

• Information and Communications Magazine
• /
• v.33 no.7
• /
• pp.53-58
• /
• 2016

본 논문에서는 전력선(Power Line Communication, 이하 PLC)통신을 이용하여, 납축배터리의 효율적인 충방전 관리 및 배터리 수명의 지표로 쓰일 수 있는 내부저항 측정 방법에 대하여 알아본다. 또한 이러한 시스템에 대한 임베디드 플랫폼을 설계하고, 실제 UPS환경과 연동시 고려해야 할 사항에 대하여 알아본 후, 이를 해결 할 수 있는 방안을 제시한다.

• Journal of Power Electronics
• /
• v.4 no.4
• /
• pp.256-260
• /
• 2004

A new communication system is suggested using a single-phase full-bridge inverter with high efficiency ferrite core for power line communication (PLC). The conventional system has a decreasing signal voltage problem due to internal resistance. The proposed system has almost zero internal impedance and replaces a linear amplifier.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.782-787
• /
• 2014

Due to the complicated steel structure and safety concern, it is very difficult to deploy wireless networks in power plants. This paper presents a hybrid network, named as $P^2HYMN$ (Power Plant HYbrid Maintenance Network), encompassing PLC (Power Line Communication), TLC (Telephone Line Communication), and Wireless LAN. The design goal of $P^2HYMN$ is to integrate multimedia data such as design drawings of control equipment, process data, and video image data for maintenance operation in electric power plants. A Multiplex Line Communication (MLC) device was designed and implemented to integrate PLC, TLC, and Wireless LAN into $P^2HYMN$. Performance test of $P^2HYMN$ has been conducted on a testbed under various conditions. The throughput of TLC was shown as 39 Mbps. Because the bandwidth requirement per camera is 8.5 Mbps on average, TLC is expected to support more thant four video camera at the same time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.296-299
• /
• 2004

This paper introduces a supplementary module reducing tile standby-power of Power Line Communication(PLC) modem, one of the network equipments that take up much of tile stand-by power. This supplementary module consists of three parts, such as a compare part, a control part, and a switch part. This supplementary module controls the power going from the power supply element into PLC modem, which brings about the effect of standby-power reduction. It is assured that over 30% standby-power reduction is estimated when we applied this module to a low-speedy PLC control modem.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.103-106
• /
• 2000

In this paper a communication system that is not using the communication line but power line is presented. It will be very useful for an information-oriented society with tele-metering and home automation. Conventional system has a difficulty in transmitting information due to decreasing communication voltage and increasing carrier, current. Proposed idea is a special type switching amplifier system which has a low inner resistance. It can provide reactive power and dose not have low impedance between the transceivers. This new system is proposed to overcome the loss of conductor load in a PLC system.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3040-3042
• /
• 2005

During the last several years, interest in broad-band power line communications (PLC) has been grown over medium voltage(MV) power distribution lines as well as low voltage lines. This paper introduces a medium voltage PLC test field that is set up in the suburbs of Euiwang city in Korea. This test field could be used not only for the measurement of communication channel environment but also for internet service. This paper shows the configuration of medium voltage test field with network devices like MV signal coupler and the results of channel environment like noise and impulse response. It also shows the service performance of PLC access network through network management system.