• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.204-210
• /
• 2013

Effects of additives (lubricant and antioxidant) and melt-blending condition (temperature, time and rotor speed) on the mechanical properties of polypropylene-based wood polymer composites (WPCs) were investigated. WPCs were prepared by melt-blending followed by compression molding. To understand melt-blending procedure, torque change of the WPC melt-blend was monitored. Maleic anhydride modified PP and nanoclay were used as a compatibilizer and a reinforcing filler, respectively. UTM and izod impact tester were used to measure the mechanical properties of the WPCs and a color-difference meter was used to measure the discoloration of the WPCs according to melt-blending condition. The mechanical properties showed that the optimized melt-blending condition was $170^{\circ}C$, 15 min, and 60 rpm. The mechanical properties of the WPCs decreased with increasing lubricant and antioxidant content. The two step method, adding wood flour later separately during melt-blending, was more effective than the typical one step method for improving the mechanical properties of the WPCs.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.391-396
• /
• 2014

Polymer microneedles can be fabricated by a micromolding method, an easy and cost-effective method. However, it is not easy to achieve uniform coating with an aqueous coating solution due to hydrophobic surface of polymer microneedles. 3-Dimensional coating polymer microneedles could deliver more than twice as much dose as in-plane metal microneedles by increasing coating area and the number of microneedles per unit area. A uniform coating was not obtained by addition of coating additives in the coating solution. The satisfied coating was achieved by treatment of surface of polymer microneedle with metal deposition and UV/ozone, and UV/ozone treatment was an ultimate surface treatment method based on biological safety. Calcein coating polymer microneedles were prepared by using UV/ozone treatment and followed dip-coating, and they delivered calcein in porcine skin successfully after 15 min of insertion.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.196-201
• /
• 2012

Electrospinning is a versatile process used to prepare micro or nano sized fibers from various materials dissolved in volatile solvents. This study reports electrospun pullulan fibrous webs fabricated through electrospinning using water as a solvent. The electrospinning conditions such as pullulan (PUL) concentration and applied voltage were optimized in order to obtain smooth electrospun fibers. The concentration of PUL greatly influenced the viscosity and surface tension of PUL solution. PUL beaded electrospun fibers were obtained from PUL solutions with concentrations lower than 5 wt%, while homogenous electrospun fibers were prepared from solutions with high concentration and high viscosity. The average diameters of PUL fibers were decreased to 200 nm when the polymer concentration was kept at 10 wt% and the applied voltage was fixed at 15 kV during electrospinning. PUL electrospun fiber exhibited higher solubility, flexibility, softness and adhesive strength.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.121-126
• /
• 2013

UV-curable high refractive index di-functional epoxy acrylate, 4,4'-thiodibenzenethiol diglycidyl ether diacrylate, was synthesized from acrylic acid and 4,4'-thiodibenzenethiol diglycidyl ether that was obtained by reacting 4,4'-thiodibenzenethiol and epichlorohydrin using a direct method (Taffy process). Its chemical structure was identified by $^1H$ NMR and FTIR. After its dilution with a reactive diluent, 2-phenoxythiol ethyl acrylate as 5, 10, 15, 20, and 30 wt% content, the relationship between their viscosity and refractive index was investigated. Their degree of cure decreased with increasing the amount of reactive diluent, and the refractive index of UV-cured film increased with increasing the degree of cure.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.15-21
• /
• 2013

Encapsulation of a paraffin wax core as a phase change material with polystyrene shell and the its thermal characteristics caused by the encapsulation were studied. For the nanoencapsulation, the miniemulsion polymerization method was selected. The factors affecting the thermal properties of prepared nanocapsule particles of phase change material were analysed in aspect of the structure of crosslinking agents, amounts of surfactant, ratio of paraffin wax to monomer, and hydrophilicity of initiators. It was assumed that Oswald ripening plays the most important role in the changes of particle size, particle morphology, and thermal capacity of nanocapsule core. It was elucidated that the thermal capacity was also dependent on the hydrophilicity and crosslinking density of polystyrene shell components.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.93-97
• /
• 2012

Heat treatment effect of polyethylene (PE) separators was investigated after storage at 80, 100 and $120^{\circ}C$ for 1 h. All the samples showed enhanced tensile strength and modulus after heat treatment, but thermal shrinkage up to 15% was observed in PE films having newly formed dimple structure on the surface of fiber after annealed at 100 and $120^{\circ}C$. Although there was 5% of thermal shrinkage after annealing at $80^{\circ}C$, no such serious changes in PE fiber was observed. Furthermore, the separator was found to have enhanced cell performance with 1.3 and 2.3 times higher tensile strength and modulus after heat treatment at $80^{\circ}C$ for 1 h.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.518-525
• /
• 2013

To improve the mechanical properties of polypropylene (PP) biocomposites reinforced with sulfuric acidtreated green algae (SGA), SGA/graphite nanoplatelets (GNP)/PP biocomposites were prepared and their properties were evaluated depending on the particle size and content of GNP. The flexural and impact strength of SGA/GNP/PP biocomposites decreased with the addition of GNP, whereas the flexrual and storage moduli were greatly improved with increasing GNP loading. SGA/GNP/PP biocomposites reinforced with GNP5 showed generally better mechanical properties compared to that reinforced with GNP15 mainly due to the improved dispersion of the smaller GNP. SGA/GNP/PP biocomposites reinforced with GNP5 showed a lower resistance to the thermal expansion because the relatively uniform dispersion of smaller GNP was responsible for the effective heat transfer to the polymer matrix. As a result, SGA/GNP/PP biocomposite was acceptable for the general purpose application due to the improved flexural resistance, storage moduli, and damping characteristics.

• Biomedical Science Letters
• /
• v.13 no.2
• /
• pp.75-81
• /
• 2007

Sodium salicylate (NaSal), a chemopreventive drug, has been shown to induce apoptosis and cell circle arrest depending on its concentrations in a variety of cancer cells. In A549 cells, low concentration of NaSal (5$\sim$10 mM) induces cell cycle arrest, whereas it induces apoptosis at higher concentration of 20 mM. In the present study, we examined the molecular mechanism for NaSal-induced cell cycle arrest. NaSal induced expression of p53, p21 (Wafl/Cipl), and p27 (Kipl) that play important roles in cell cycle arrest. p53 induction was mediated by its phosphorylation at Ser-15 that could be prevented by the PI3K-related kinase (ATM, ATR and DNA-PK) inhibitors including wortmannin, caffeine and LY294002. In addition, NaSal-induction of p2l (Wafl/Cipl) was detected in P53 (+/+) wild type A549 cells but not in p53 (-/-) mutant H1299 cells, indicating p53-dependent p21 (Wafl/Cipl) induction. In contrast, p27 (Kipl) that is a negative regulate. of cell cycle with p21 (Wafl/Cipl) was observed both in A549 cells and H1299 cells. Thus, 5 mM NaSal appeared to cause cell cycle arrest through inducing the cyclin-dependent kinase inhibitor p21 (Wafl/Cipl) via PI3K-related protein kinase-dependent p53 activation as well as by up-regulating p27 (Kipl) independently of p53 in A549 cells.

• Korean Journal of Clinical Pharmacy
• /
• v.22 no.3
• /
• pp.228-233
• /
• 2012

Purpose: The purpose of this study was to elucidate the effect of dissolved oxygen in alcohol to blood pressure of healthy persons. Methods: Subjects (n=30) were randomized in a double blind crossover study to receive 120 mL, 240 mL, 360 mL of alcohol (Korean spirit, 19.59 v/v%, dissolved oxygen is 8 ppm and 20 ppm). Blood alcohol concentration (BAC) and blood pressure were measured applying Lion SD-400 Alcolmeter$^{(R)}$ Breathalyser and Tensoval duo control. Pharmacokinetic parameters ($C_{max}$, $T_{max}$, $AUC_{last}$, $K_{el}$, $V_d$, Clearance) were calculated using Winnonlin$^{(R)}$ program. The difference of parameters and values were analysed by student t-test using Microsoft$^{(R)}$ Excel program. Results: The $AUC_{last}$ values of 8 ppm group and 20 ppm group in 240 ml administration were $6.15{\pm}2.60cg{\cdot}min/ml$, $5.33{\pm}1.84cg{\cdot}min/ml$ (p<0.05) and those in 360 mL were $11.93{\pm}5.70cg{\cdot}min/ml$, $10.33{\pm}4.60cg{\cdot}min/ml$ (p < 0.01), respectively. Thus, the $AUC_{last}$ was significantly decreased. On the other hands, there was a significant change in systolic blood pressure (SBP) after alcohol administration. All measured value after 360 mL of alcohol administration was significantly decreased (p < 0.01). Conclusions: The dissolved oxygen in alcoholic beverage has no effect on blood pressures but the alcohol administration has an effect on blood pressure. Thus, SBP can be used as a biomarker of alcohol administration and utilized in PK/PD modeling of alcohol.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.12
• /
• pp.1689-1695
• /
• 2017

Objective: The cytokine inducible SH2-containing protein (CISH), which might play a role in porcine intestine immune responses, was one of the promising candidate genes for piglet anti-disease traits. An experiment was conducted to characterize the porcine CISH (pCISH) gene and to evaluate its genetic effects on pig anti-disease breeding. Methods: Both reverse transcription polymerase chain reaction (RT-PCR) and PCR were performed to obtain the sequence of pCISH gene. A pEGFP-C1-CISH vector was constructed and transfected into PK-15 cells to analysis the distribution of pCISH. The sequences of individuals were compared with each other to find the polymorphisms in pCISH gene. The association analysis was performed in Min pigs and Landrace pigs to evaluate the genetic effects on piglet diarrhea traits. Results: In the present research, the coding sequence and genomic sequence of pCISH gene was obtained. Porcine CISH was mainly localized in cytoplasm. TaqI and HaeIII PCR restriction fragment length polymorphism (RFLP) assays were established to detect single nucleotide polymorphisms (SNPs); A-1575G in promoter region and A2497C in Intron1, respectively. Association studies indicated that SNP A-1575G was significantly associated with diarrhea index of Min piglets (p<0.05) and SNP A2497C was significantly associated with the diarrhea trait of both Min pig and Landrace piglets (p<0.05). Conclusion: This study suggested that the pCISH gene might be a novel candidate gene for pig anti-disease traits, and further studies are needed to confirm the results of this preliminary research.