• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.117-123
• /
• 2016

In recent years, Personal Health Record (PHR) has emerged as a patient-centric model of health information exchange. The Personal Health Record (PHR) owners enjoy the full right of accessing their records anywhere and anytime making storage and retrieval more efficient. Due to the sensitivity and confidential nature of the PHR, however, the PHR is maintained in a secure and private environment with the individual determining rights of access. In this paper, we propose a system which enables access to the user's PHR in the event of emergency. In emergency situation where the user is unconscious, the emergency staff can use the PHR information to request a emergency access to the PHR server based on the predefined rights of access for PHR. Under the proposed system, the PHR owner can specify a fine grain access control policy during emergency situations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.831-833
• /
• 2013

PHR is integrated into the server, so the problem has managed. Thus, the highly sensitive information stored on the server. PHR should be limited to the access rights. In this paper, the access rights of PHR as a way to distinguish the role of each approach based on a distributed hierarchical key to ensuring the privacy of PHR by key distribution protocol is proposed.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.373-382
• /
• 2012

With the paradigm shifts towards consumer-centered health service, it is expected that more health care consumers will keep their health information and manage their own health in the future. Thus, this study was conducted to compare "Understanding", "Utilization" and "Management" of Personal Health Record(PHR) between medical users(healthcare students) and health care providers(medical students). We collected data from 208 health and medical students via using self-reported questionnaires form April to June, 2011. The collected data were analyzed using frequency, t-test, Chi-square on SPSS 19.0 version. There was no significant difference in "Understanding" of PHR between two groups. Looking at the order of the importance of PHR contents, two groups equally emphasized medical records, surgical history, and test results. There was significant difference in both time and effectiveness of PHR(p=0.02). Intergrated type of PHR was preferred by both groups. Recently, PHR reflects needs and demands of users more than ever. However there are many limitations to promote the utilization. In the future, it is necessary to implement targeted strategies for the elderly groups and specific types of disease.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1703-1710
• /
• 2011

Objectives: Using a PHR(Personal Health Record) is very important for the management of chronic disease and health. The young age group in this study was asked to pretend that they were members in the old age group (adult group here after) in order to investigate the recognition level differences in such conditions. Methods: We conducted face to face surveys with two age groups. 131 Adults and 398 University students, from May 11 to 22 in 2009. The questionnaires were composed of 18 items. Results & Conclusion: Adults replied more favorably than University students in using PHR willingness(University group 3.3score, Adults 3.7score) and recommendation(university 3.1score, Adults 3.8score). Adults liked paper PHR (63.2%), whereas, University students favored electronic Personal Health Record (71.1%). University students were highly concerned about disclosing the information(4.5score) of their PHR. They thought the appropriate time of education for PHR is high school or University degree. Therefore, in the future, it is vital that a PHR for young age group should be begun in early education and that an ePHR should be developed.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.565-572
• /
• 1996

The optimum loading of carbon black was studied for the rubber compounds of natural rubber(NR), butadiene rubber(BR), and styrene-butadiene rubber(SBR) with different amount of oil. The optimum loading of carbon black was determined by the volume ratio of carbon black and L factor of Lee's theory. The optimum loading of carbon black was confirmed by the examination of physical properties of the rubbers. The optimum loading amounts of carbon black for the each rubber compound were 60 phr for NR, 57 phr for BR, 65 phr for SBR-A, 70 phr for SBR-B, and 76 phr for SBR-C, respectively. The optimum loading of carbon black was increased by 5 phr for every increment of 20 phr of oil content. It was revealed that the optimum loading amount of carbon black determined by L factor is closely related to the tensile strength of the rubber compounds. The optimum loading amount of carbon black was observed at the amount which shows the maximum value of tensile strength.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2077-2080
• /
• 2000

We studied about electrical, chemical and mechanical characteristics of XLPE by dicumyl peroxide(DCP) and trimethylolpropane triacrylate(TMPTA) content ratio. DCP content was changed from 1.0 to 2.5phr increasing 0.5phr. TMPTA content was changed 0.5 to 1.5phr increasing 0.5phr. Thermal analysis (DSC) was carried out in order to observe tendency of 79 according to DCP and TMPTA content. In experimental results, content DCP 2.0phr and TMPTA 1.0phr has highest breakdown strength. Content DCP 2.0phr and TMPTA 0.5phr has lowest dielectric constant. Tendency of Tg did not affected by DCP and TMPTA content. Breakdown strength and Specific inductive capacity was measured.

• Journal of Magnetics
• /
• v.19 no.2
• /
• pp.151-154
• /
• 2014

Recent years have seen an increasing range of planar Hall resistive (PHR) sensor applications in the field of magnetic sensing. This study describes a new application of the PHR sensor to monitor a current. Initially, thermal drift experiments of the PHR sensor are performed, to determine the accuracy of the PHR signal output. The results of the thermal drift experiments show that there is no considerable drift in the signals attained from 0.1, 0.5, 1 and 2 mA current. Consequently, the PHR sensor provides adequate accuracy of the signal output, to perform the current monitoring experiments. The performances of the PHR sensor with bilayer and trilayer structures are then tested. The minimum detectable currents of the PHR sensor using bilayer and trilayer structures are $0.51{\mu}A$ and 54 nA, respectively. Therefore, the PHR sensor having trilayer structure is the better choice to detect ultra low current of few tens nanoampere.

• Advances in materials Research
• /
• v.4 no.2
• /
• pp.97-111
• /
• 2015

Polypropylene short fiber (PP)-clay particulate-epoxy ternary composites were prepared by reinforcing PP short fiber and clay particles in the range of 0.1 phr to 0.7 phr into epoxy resin. Prepared hybrid composites were characterized for their mechanical, thermal and flame retardant properties. The obtained results indicated an increase in impact resistance, tensile strength, flexural strength and Young's modulus to an extent (up to 0.5 phr clay and 0.5 phr PP short fiber) and then decreases as the reinforcing phases are further increased. The thermal stability of these materials are found to increase up to 0.2 phr clay and 0.2 phr PP addition, beyond which it is decreased. Addition of clay is found to have the negative effect on epoxy-PP short fiber composites, which is evident from the comparison of mechanical and thermal properties of epoxy-0.5 phr PP short fiber composite and epoxy-0.5 phr PP short fiber-0.5 phr clay composite hybrid. UL-94 tests conducted on the composite hybrids have showed a reduction in the burning rate. Morphological observations indicated a greater fiber pull with the addition of clay. The performed tests in the present study indicated that materials under investigation have promising applications in construction, agriculture and decorative purposes.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.5
• /
• pp.421-426
• /
• 2008

The magnetic bio-sensor used the PHR (planar hall resistance) effect generated by the free layer in spin-valve giant magnetoresistance structure of Ta/NiFe/CoFe/Cu/NiFe/IrMn/Ta. The PHR element with micrometer size was fabricated through the photolithograph and dry etching process. The PHR signal with magnetic field was measured under the conditions of with and without single magnetic bead. A single magnetic bead of diameter $2.8\;{\mu}m$ was successfully detected using the PHR sensor. Therefore, the high resolution PHR sensor can be applied to bio-sensor application utilizing the output voltage variation of the PHR signals in the presence and absence of a single magnetic bead.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.162-168
• /
• 2014

'Personal Healthcare Records' (PHR) is a service for providing individual clinical data to patients. PHR service should be useful for the patient and healthcare service providers. This study has aimed at not only providing patients' clinical data but also developing optimized healthcare service for every patients. The research has been conducted as 3 phases: formal case analysis, caregivers interviews and patients interviews. The patients interviews were limited to cancer patients. As results, 3 key functions have been developed. First, it offers patient's clinical pathway as a personalized medical treatment scheduler. Second, it supplies Question & Answer board on online. Last, it supports patients to input their healthcare record. This Myongji PHR service has 3 months of pilot test on web and mobile application(android version). For further commercialized PHR service, the standardization for clinical pathway registration and user convenience need to be considered.