• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.66-71
• /
• 2005

Periapical cemental dysplasia(PCD) is a condition most commonly seen in the mandibular incisor region. Radiographically it passes through the three phases(osteolytic stage, intermediate stage, and mature stage). At osteolytic stage, the lesion is similar to features associated with granuloma or cyst that arise following pulpal necrosis. So, it is important to confirm the vitality of the pulp to diagnosis. In this case, it is difficult to confirm the vitality of involved tooth because the tooth was covered with PFG bridge. And it is unusual that the PCD lesion at mandibular incisors has occurred at first and the lesion of mandibular canine and mandibular premolar were occurred afterward.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1050-1057
• /
• 2006

This paper proposes a new predistortion linearizer with amplitude modulator and PFG(Polar Function Generator) using second order harmonic signals. This linearizer consists of PFG that combine with in-phase and quadrature-phase of second harmonic signals and amplitude modulator in main path. The predistorted third order intermodulation distortion(IMD3) signals that are generated by amplitude modulator with fundamental and PFG signals, improve a amplifier nonlinear characteristics. The proposed linearizer and amplifier have been manufactured and tested to operate in cellular base-station transmitting band$(869\sim894MHz)$. The test results show that IMD3 can be removed by more than 22.5 dB in case of CW 2-tone signals ${\Delta}f=1$ MHz, and the adjacent channel power ratio(ACPR) also can be improved by more than 8.4 dB for CDMA IS-95 1FA signals.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.16-27
• /
• 2015

Holography technology which was developed by Dennis Gabor (1900~1979) in 1948 is a technology to record wave planes of actual 3D objects. It is known as the only technology which can express 3D information most perfectly close to human-friendly. Holography technology is widely used in advertisement, architecture and arts as well as science technology areas. Especially, digital holographic print which is an applied area is greatly used in military map, architecture map and cultural asset restoration by printing and reproducing 3D information. Holography is realized by recording and reproducing the amplitude and phase information on high resolution film using coherent light like laser. Recording materials for digital holographic printer are silver halide, photoresist and photopolymer. Because the materials have different diffraction efficiency according to film characteristics of each manufacturer, appropriate guide lines should be suggested through efficiency analysis of each film. This paper suggests appropriate guide lines through the diffraction efficiency measurement of silver halide which is a holographic printer recording medium. And the objective of this study is to suggest appropriate guide lines through diffraction efficiency analysis of Ultimate 08-C and PFG-03C which are commercially used. The experiment was prepared by self-diffraction efficiency system which measures the strength with the defector by penetrating RGB recording medium and concentrating diffracted beams through collimating lens. The experiment showed Geola's PFG-03C which is a silver halide for full color has price/performance advantage in optical hologram recording, but recording angles and reproduction angles are irregular for digital holographic printer recording. Ultimate's Ultimate08-C for full color shows its diffraction efficiency is relatively stable and high according to recording angles and laser wavelength.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.350-353
• /
• 2009

본 연구는 서해안 특성에 적합한 연안역 안전시설 설계기준을 마련을 위해 국내 외 도로, 해안, 항만 구조물의 안전시설기준을 비교, 분석, 정리하였다. 검토된 설계기준은 항만시설물의 안전시설 설계지침,항만 및 어항설계기준, 조경 설계기준, 도로부대시설, 도로교 설계기준, 미국 FHWA DSTA, 그리고 미국 FHWA PFG을 검토하였다. 검토결과 국내의 연안역 안전시설 설계기준 및 적용이 미흡한 상황에 있으며 설계외력산정 및 평가에 적절한 보정계수 및 관련 상세설계기준 마련이 시급한 것으로 판단된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.403-407
• /
• 2010

This paper shows that the diffraction efficiency is influenced by superadditivity for the combination of the different developing agent and concentrations in the reversal bleach applied to the Slavich PFG-01 plate to be used for recording transmission holograms. The four developers based on ascorbic acid in combination with metol, phenidone, hydroquinone respectively, were studied. In diffraction efficiency aspect, the superadditivity effect of mixture of two developing agents is lower than one developing agent developer, AAC in the reversal bleach.

• Journal of Technologic Dentistry
• /
• v.23 no.1
• /
• pp.115-121
• /
• 2001

This study was investigated on effect of implant system about investment condition and burn out temperature. Posterior bridges were fabricated by using plastic sleeve and gold sylinder. The results were as follows; In plastic sleeve test and fitting cast copings. the phosphate bonded investment showed better gypsum bonded investment. The pure special liquid showed better margin fitness compared with mixed liquid (special liquid + distilled water). In gold cylinder test. the good burn out temperature of Ceramic PFG and Crown Gold was evaluated $0^{\circ}C$ to $820^{\circ}C$ and was decreased on $780^{\circ}C$ for 30 minutes. $0^{\circ}C$ to $750^{\circ}C$ and was decreased on $650^{\circ}C$ for 30 minutes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.71-78
• /
• 2021

Implant treatment, which was first attempted in fully edentulous patients, is now widely used in partially edentulous, and a single tooth missing patients. Moreover, implant treatment has become an essential treatment modality in modern dentistry. The material of fabricating implant prostheses has also become more diverse than before, one of which is the use of high-performance polymers. The frequency of using high-performance polymers, which have been used in the medical field, is also increased in the dental field compared to the past. In the first case, a PEKK abutment and a PFG crown (cement-screw-retaining type) were fabricated in the lower left second premolar, and in the second case, a PEKK abutment and a monolithic zirconia crown (cement-screw-retaining type) were fabricated in the missing upper left first molar, and in the third case two PEKK abutments and a splinted PFM crowns (cement-screw-retaining type) were fabricated and connected to the upper right first and second molar implants. Through these procedures the patients obtained esthetically and functionally satisfactory results after 4 years of follow-up.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.1
• /
• pp.25-33
• /
• 2014

PURPOSE: The purpose of this was to translate Patient-Rated Tennis Elbow Evaluation(PRTEE) into Korean and identify the reliability and validity of a Korean version of PRTEE. METHODS: The subjects of this study were 32 patients diagnosed with lateral epicondylitis. The subjects were surveyed using a Korean version of PRTEE three times: at the first visit, one week after, and two weeks after. This questionnaire consisted of 15 questions including 5 questions about pain and 10 questions about functions. Intraclass correlation coefficients were used to measure reliability and Cronbach's alpha coefficients were used to assess internal consistency. In addition, the validity of the survey results was examined by correlating a visual analogue scale with the outcome of holding without pain. RESULTS: Test-retest reliability of Korea version PRTEE was good total ICC= .962 (CI=.922-,982). Cronbach's alpha value for PRTEE was found to be .955 and it was statistically significant (p<.05). The positive correlation between PRTEE and VAS was moderate to high (r=.753, P=.00) and statistically significant. There was also a low significant negative correlation between PRTEE and PFG (r=-.362, P=.042). CONCLUSION: The Korean version of PRTEE had reliability and validity. Therefore, it is a useful measure to evaluate the conditions of patients with lateral epicondylitis.

• Korean Journal of Pharmacognosy
• /
• v.27 no.1
• /
• pp.26-31
• /
• 1996

A sesquiterpene ortho-naphtpoquinone was isolated from the 80% aqueous methanolic extract of root bark of Ulmus davidiana Planch whose stem and root bark have been used as an oriental medicine for the treatment of edema, mastitis, gastric cancer and inflammation. On the basis of spectral data obtained from UV-vis, IR, HR-EIMS and NMR spectrometry, including the pulse field gradient (PFG) HMQC and HMBC techniques, the structure of this compound was determined as 2,3-dihydro-3-hydroxy-3,6,9-trimethylnaphtho(1,8-b,c)pyran-7,8-dione which has been known as mansonone 1. This compound has been isolated only from the heart-wood of Mansonia altissima Chev, a Sterculiacea from West Africa. Thus, this compound was isolated for the second time from natural source in this study. This is the first report to present the carbon chemical shift assignment of mansonone I.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.27-30
• /
• 1999

Poly(phenylene oxide)s were used to prepare flat, integrally skinned self-supporthed asymmetric membranes by dry-wet phase separption. The intrinsic ideal gas selectivity of poly- (2,6-dimethy-1,4-phenylene oxide) (PMPO) was retained in the membranes, and improved by a coating with silicone rubber. Polymers of the same class were coated of UF supports with a silicon rubber gutter layer, yielding composite membranes with high flux but lower selectivity. The effect of th glutaraldehyde cross-linking of sodium alginate (SA) membranes on the mobility of water and ethanol has been studied with pfg nmr. Crosslinking reduces water self-diffusion, and does not seem to be stable on the timescale of weeks.