• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.121-121
• /
• 2018

Copper is a promising electronic material due to low cost and high electrical conductivity. However, the oxidation problem in an ambient condition makes a crucial issue in practical applications. In here, we developed a simple and cost-effective Cu patterning method on a flexible PET film by combining a solution processable Cu nanoparticle patterning and a low temperature post-processing using acetic acid treatment, laser sintering process and acid-assisted laser sintering process. Acid-assisted laser sintering processed Cu electrode showed superior characteristics in electrical, mechanical and chemical stability over other post-processing methods. Finally, the Cu electrode was applied to the flexible electronics applications such as flexible and transparent heaters and touch screen panels.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.127-130
• /
• 2005

Intrinsic UV reflection and fluorescence behaviors of polycarbonate, polyurethane and poly(ethylene terephthalate) films were investigated in order to characterize the interaction of water in these films. During water sorption process, UV reflection spectra of polycarbonate and polyurethane films showed little peak position changes. Fluorescence emission spectra of polycarbonate films showed red spectral shifts from 332 nm with water immersion time. This red-shifted peak could be due to phenyl-2-phenoxybenzoate, which is one of the major thermal degradation products in polycarbonate. Fluorescence peaks of polyurethane films appeared at two different positions and the ratio of these peak intensities increased with increasing immersion time. In the case of PET films, the UV reflection spectrum showed the peak intensity around 340 nm to change in response to water sorption. The fluorescence near 388 nm probably due to ground state dimer exhibited sensitivity with water sorption, when excited at 340 nm.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.478-483
• /
• 2009

An optical sheet with a cone array is designed, simulated, and fabricated in order to substitute the dual crossed prism sheets in the edge-type LCD backlight. The optimum structure of cone textures that is compatible with the dual crossed prism sheets was obtained by simulating the backlight installed with the cone array optical sheet. A SU-8 photoresist films of thickness $30{\sim}50{\mu}m$ were spin-coated on a polyethylene terephtalate film (PET), and the cone texture array was formed by using the diffuse lithography that employed a photomask with circular patterns and an optical diffuser.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.203-204
• /
• 2008

Using various surfactants, multi-walled carbon nanotube (MWNT) was dispersed in organic solvent, isopropylalcohol(IPA). To refine the MWNT and give the functional group, MWNT was treated with sulfuric acid/nitric acid(v/v=3/1). The cationic, nonionic and anionic surfactants were used as MWNT dispersion agents in the organic solvent. Dispersion effect of various surfactants was observed by optical microscope and HR-TEM. Surface resistivities of MWNT dispersions were measured after coating on PET film. MWNT was dispersed well by poly vinyl pyrrolidone(PVP), nonionic surfactant.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1457-1458
• /
• 2009

The fundamental parameters controlling ink-jet printing liquids are the viscosity and surface energy. The wetting contact angle determines the spread of a liquid drop on the surface and depends on the relative surface energy. The characteristics of silver ink-jet printing were studied with control of surface energy and head temperature. Polyethylene terephthalate(PET) film and Si-wafer(ptype) were used as substrates and atmospheric plasma was treated to control the surface energy. With silver ink, the hydrophilic surface treatment could reduce the radius of droplets due to the hydrophobic nature of silver ink.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.681-684
• /
• 1999

N-methyl phenazinium 7, 7, 8, 8-tetra-cyanoquinonedimethane (TCNQ) complex salt was synthesized and bar-coated on PET film using various binders. Optical microscope and SEM reveals that TCNQ complex salt crystals were grown on the surface of binders and the shape was different with binders. The surface resistivity was 1$^{5}$ $\Omega$/$\square$ when binders has compatibility with TCNQ complex salt.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.427-431
• /
• 2000

ITO (indium tin oxide) thin films on PET (polyethylene terephthalate) and glass substrates have been deposited by a dc magnetron sputtering without heat treatments such as substrate heater and post heat treatment. Each sputtering parameter during the sputtering deposition is an important factor for the high quality of ITO thin films deposited on polymeric substrate. Particularly, the material, electrical and optical properties of as-deposited ITO oxide films are dominated by sputtering power, oxygen partial pressure and films thickness. As the experimental results, the XRD patters of ITO films are influenced by sputtering power and pressure. As the power and pressure are increased, (411) peak is grown suddenly. the electrical resistivity is also increased, as the sputteing power and pressure are increased. Transmittance of ITO thin films in visible light ranges is lowered with increasing the sputtering power and film thickness. Reflectance of ITO films in infia-red region is decreased, as the power and pressure is increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.306-309
• /
• 2000

The conductive polymers, polyaniline (PANI) emeraldine base and 3, 4-polyethylene dioxythiophene (PEDOT) were synthesized and coated on the PET film primer-dealt with acryl type to find out the electromagnetic shielding effectiveness. When conductive polymer such as PANI and PEDOT is used, if the thickness of coating increases then the electromagnetic shielding effectiveness increases, too, but the visible light transmittance decreases. For PANI, when its conductivity increased, its electromagnetic shielding effectiveness increased, too. For PANI, if the surface resistance is about 140 $\Omega$/$\square$, the shielding effectiveness is about 11 dB in the far field, and about 13 dB in the near field at 1 GHz. For PEDOT, when the surface resistance is about 200 $\Omega$/$\square$, the shielding effectiveness is about 3 dB.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.371-371
• /
• 2010

탄소나노튜브(CNT)는 기계적인 특성이 뛰어나며, 화학적으로 안정하고, 전기적으로 도체 및 반도체성을 가지고 있을 뿐만이 아니라 직경이 최소 1nm 수준으로 종횡비 및 비표면적이 매우 큰 특성을 가지고 있다. CNT는 투명전극, 유연성 디스플레이, 전자종이 분야 등 투명 전극 응용 분야에서 ITO 대체 신소재로 각광을 받고 있다. 본 발표에서는 SWCNT 전도막의 특성을 향상시키기 위해 PET 기판에 다양한 전처리 방법을 적용하여 SWCNT의 부착력 및 접착력, 투명전극의 면저항, 투과도 및 균일도 향상을 통해 SWCNT 투명전극 특성향상 연구를 진행했다. 접촉각과 표면에너지 제어를 통한 박막특성과의 상관관계 분석, 전처리 방법에 따른 표면에너지 및 제타포텐셜 변화와 박막특성과의 관계를 규명, Roughness 조절을 통한 기판의 면저항과 투과도 향상, 플라즈마 및 polymer 처리를 통해 물리적, 화학적 기판 전처리에 따른 SWCNT 투명전극 특성 향상을 목적으로 실험을 진행했다. 플라즈마 처리 후 polymer 처리된 박막에서는 친,소수 작용기 양의 변화에 따른 상관관계를 보이지 않았지만, 플리즈마 처리 후 친,소수 작용기 양과 Roughness 변화정도에 대해서는 면저항과 투과도의 변화를 보였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.153-153
• /
• 2012

자연계에는 다양한 생물체들의 표면 구조가 특수한 기능을 갖는 형태로 되어 있다. 이와 같이 특수한 기능을 갖는 생물체들의 표면 구조는 일반적으로 화학적 조성과 표면의 더불어 나노와 마이크로 구조가 혼합되어 있는, 이른바 hierarchical 구조를 보인다. 그 중에서도 표면 초소수성 특성을 보이는 연잎의 표면과 같은 hierarchical 구조는 self-cleaning effect 등의 기능성 표면 제작에 활용이 가능하여 이를 모사하기 위한 연구가 활발히 진행중에 있다. 이에 본 연구에서는 연잎과 같은 초소수성을 띄는 ZnO nano-in-micro hierarchical 구조를 저온 공정을 통하여 다양한 기판에 제작하였다. 이를 위하여 ZnO 나노 입자 분산 레진을 제작하였고 UV imprinting 과 수열합성법을 통하여 마이크로 패턴 상부에 ZnO 나노 입자가 형성된 ZnO nano-in-micro hierarchical 구조를 형성하였다. 제작된 ZnO hierarchical 구조의 젖음 특성은 표면 접촉각이 $160^{\circ}C$이상인 초소수성을 보였으며, 제작 공정에는 고온의 열처리가 수반되지 않아 PET film 등 다양한 기판에 ZnO hierarchical 구조를 제작할 수 있었다.