• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.29-33
• /
• 2012

In this study, we have investigated the structural and electrical characteristics of IZO thin films deposited under hydrogen atmosphere on flexible substrate for the OLED (organic light emitting diodes) devices. For this purpose, PES was used for flexible substrate and IZO thin films were deposited by RF magnetron sputtering under hydrogen ambient gases (Ar, $Ar+H^2$) at room temperature. In order to investigate the influences of the hydrogen, the flow rate of hydrogen in argon mixing gas has been changed from 0.1sccm to 0.5sccm. All the samples show amorphous structure regardless of flow rate. The electrical resistivity of IZO films increased with increasing flow rate of $H^2$ under $Ar+H^2$. All the films showed the average transmittance over 85% in the visible range. The OLED device was fabricated with different IZO electrodes made by configuration of IZO/$\acute{a}$-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show good current density-voltage-luminance characteristics. This suggests that flat surface roughness and low electrical resistivity of a-IZO anode film lead to more efficient anode material in OLED devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1317_1318
• /
• 2009

본 논문에서는 폴리머 기판에서의 레이저 조사 밀도와 기판의 온도변화에 따라 성장하는 ZnO박막의 구조적 특성을 알아보기 위해 펄스레이저 증착법으로 polyethersulfone（PES)기판상에 ZnO 박막을 형성하였다. 레이저 조사 밀도는 0.2~0.4 J/$cm^2$까지 기판온도는 $50^{\circ}C{\sim}200^{\circ}C$까지 변화시켰고, 박막의 결정 구조적 특성을 XRD, AFM, SEM을 통해서 관찰하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제19권9호
• /
• pp.28-32
• /
• 2006

A 7.0-inch transmissive type plastic TFT-LCD was developed at the resolution of 640 $\times$ 3 $\times$ 480 lines (114ppi). All of the processed of TFT, color filter and LC were carried out below $130^{\circ}C$ on PES plastic films. The process conditions of TFT, color filter and LC were optimized for large area TFT-LCD on plastic substrate. The backplane and the color filter was strongly adhered while the panel was bending by using holding spacers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.962-964
• /
• 2007

A 14.1-inch reflective type Thin Film Transistor-Electric Phoretic Display was developed at the esolution of 1280 x 900 lines on plastic substrate. All of the processes of TFT were carried out below $100\;^{\circ}C$ on PES plastic films. The process conditions of TFT were optimized for large area TFT-LCD on plastic substrate. At $60^{\circ}C$ high temperature during 160hours, TFT does not delaminate and IV characteristic is also satisfied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.752-755
• /
• 2007

In this paper, to compare thermal and chemical stabilities of poly-ethylene-terephtalate (PET) and polyether- surphone (PES), we fabricated Polymer Light Emitting Diode (PLED) on each substrate and analyzed these characteristics. Moreover, we analyzed the characteristics of the device deposited LiF (1 nm) before cathode deposition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1500-1501
• /
• 2006

Because AZO thin film has the potential applications, Preparing AZO thin films on the polymer substrate has been widely studied. In this study, we prepared AZO thin films on polyethersulfon (PES) at room temperature. The AZO thin films were prepared at $O_2$ gas flow rate of 0.05 and sputtering power of 100W with different film thickness by facing targets sputtering method. The electrical, optical and crystallographic properties of AZO thin films were measured by Hall effect measurement system, UV/VIS spectrometer, SEM and XRD. From the results, we obtained AZO thin films with a low resistivity, a transmittance of over 80% and c-axis preferred orientation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.700-702
• /
• 2005

A 5.0-inch transmissive type plastic TFT arrays were successfully fabricated on a plastic substrate at the resolution of $400{\times}3{\times}300$ lines (100ppi). All of the TFT processes were carried out below $150^{\circ}C$ on PES plastic films. After thin film deposition using PECVD, thin film failures such as film delamination and cracking often occurred. For successful growth of thin films (about 1um) without their failures, it is necessary to solve the critical problem related to the internal compressive stress (some GPa) leading to delamination at a threshold thickness value of the films. The Griffith's theory explains the failure process by looking at the excess of elastic energy inside the film, which overcomes the cohesive energy between film and substrate. To increase the above mentioned threshold thickness value there are two possibilities: (i) the improvement of the interface adhesion (for example, through surface micro-roughening and/or surface activation), and (ii) the reduction of the internal stress. In this work, reducing a-Si layer film thickness and optimizing a barrier SiNx layer have produced stable CVD films at 150oC, over PES substrates

• 멤브레인
• /
• 제31권6호
• /
• pp.393-403
• /
• 2021

생체 내 변화에서 효소는 중요한 촉매이다. 효소의 안정성과 재사용성은 촉매 과정에서 중요한 요소이다. 적합한 기질에 효소 고정화는 특정 미세환경의 조성을 통해 효소 활동성을 높인다. 다양한 종류의 분리막이 각각의 생체적합성과 막 표면의 친수성/소수성 조절 용이도에 따라 기질로 사용되었다. 본 논문에서는 셀룰로스, 폴리아크릴로니트릴(PAN), 폴리디메틸실록산(PDMS), 폴리비닐리덴플루오라이드(PVDF), 폴리에테르설폰(PES) 고분자 분리막이 소개되고 토의되었다. 고정화 효소를 이용한 유기오염물의 생물적 분해는 제약 회사 및 섬유 회사 등에서 발생하는 오염물질을 친환경적으로 감소할 수 있는 방법이다. 효소 고정화 생물반응기(EMBR)로 기름의 가수분해를 제어할 수 있고 이를 통해 탄소 배출량 감소 및 환경오염을 줄일 수 있다. EMBR로 만들 수 있는 바이오에탄올과 바이오디젤은 화석 연료의 대체제이다.

• 폴리머
• /
• 제30권3호
• /
• pp.207-209
• /
• 2006

ITO 코팅 글라스를 기판으로 사용하고 폴리(페닐렌에테르설폰)(PES)을 감습막으로 하여 정전용량형 습도센서를 제작하였다. 감습막은 PES를 m-cresol에 용해한 후 스핀코팅으로 제조하였고 그 상부에 다공성 Au막을 스퍼터링으로 증착하였다. 상대습도 $20\sim90%$의 범위에서 센서의 용량은 감습막두께에 반비례하였고 1% 미만의 비선형 특성을 나타내었다. 또한 $1.4{\mu}m$ 두께의 샘플에서는 20 kHz에서 1.3%의 히스테리시스와 1.14의 우수한 감도를 얻을 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.134-134
• /
• 2012

We investigated the interface of poly (3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) by using photoelectron spectroscopy (PES). These are the most widely used materials for bulk heterojunction (BHJ) organic solar cells due to their high efficiency. Study of the BHJ interfaces is difficult because the organic films are typically prepared by spin coating in ambient conditions. This is incompatible with the interface electronic structure probes such as PES, which requires ultrahigh vacuum conditions. Study of interface requires gradual deposition of thin films that is also incompatible with the spin coating process. In this work, we used electrospray vacuum deposition (EVD) technique to deposit P3HT and PCBM in high vacuum conditions. EVD allows us to form polymer thin films onto ITO substrate in a step-wise manner directly from solutions and to use PES without exposing the sample to the ambient condition. Although the morphology of the EVD deposited P3HT films observed by optical and atomic force microscopes is quite different from that of the spin coated ones, the valence region spectra were similar. PCBM was deposited on the P3HT film in a similar manner and the energy level alignment between these two materials was studied. We discuss the relation between Voc of P3HT:PCBM solar cell and HOMO-LUMO energy offset obtained in this study.