• 폴리머
• /
• 제29권5호
• /
• pp.468-474
• /
• 2005

약물 전달체로서 캬비톨에 의해 개시된 PLGA와 PCL은 락타이드, 글라이콜라이드, 그리고 카프로락톤의 개환 중합에 의해서 합성되었다. 이들 합성고분자를 이용한 이식형 웨이퍼는 합성고분자와 모델 단백질 약물로서 소혈청알부민의 물리적 혼합 후에 성형 압축법에 의해서 간단히 제조되었다. 웨이퍼로부터 알부민의 방출량은 형광측정기를 사용하여 형광 강도에 의해서 측정되었다. 또한 웨이퍼에서 알부민의 방출거동은 콜라겐, 소장점막하조직, 폴리비닐피롤리돈, 그리고 폴리에틸렌글리콜과 같은 첨가제를 통해 조절되었다. PLGA와 PCL로만 준비된 웨이퍼에서의 알부민의 방출은 30일 동안 $10\%$ 미만의 느린 방출거동을 보였다. 그러나 첨가제를 함유한 웨이퍼는 첨가제 함량에 따라서 다양한 서방형의 방출거동을 보였다. 더욱이 콜라겐과 소장점막하조직과 같은 천연재료를 함유한 웨이퍼는 폴리비닐피롤리돈, 폴리에틸렌글리콜과 같은 합성재료를 함유한 웨이퍼보다 0차 방출의 거동을 보였다. 이러한 이식형 웨이퍼로부터 알부민의 방출은 천연재료의 첨가를 통해 쉽게 조절할 수 있음을 확인하였다.

• 한국전문물리치료학회지
• /
• 제14권2호
• /
• pp.1-10
• /
• 2007

The purpose of this experiment was to investigate the applicability of audio-visual modeling for improving the efficiency of rehabilitative programs by analyzing the effects of observing these various models on the capacity of stroke patients to perform upper limb activities. Twenty-one stroke patients participated in the experiment and were randomly assigned to either task modeling, sport modeling, or control group. During 2 weeks of intervention, subjects in all groups participated in the physical practice of experimental tasks. These tasks comprised of a Nine Hole Peg Test, the Jebsen-Taylor Hand Function tests, and locomotion. These tasks were performed 5 days a week, 30 min per day. In addition to the physical practice, the task modeling group observed a model performing experimental tasks and locomotive activities for 20 min, while the sport modeling group observed a model performing various sport activities for 20 min. Subjects' ability to perform the experimental tasks was measured 3 times, before, immediately after, and 1 week after the intervention. Analyses of the capacity to perform upper extremity activities displayed significant improvement from the pre-test to immediate and delayed post-tests in all groups. However, the amount of improvement was the highest in the task modeling group. The task modeling group was superior to the control group in the post-test of all experimental tasks, whereas the sport modeling group did not display significant differences from the control group. These results suggest that audio-visual modeling can be used as an effective cognitive intervention for facilitating the rehabilitation of stroke patients, and its rehabilitative effect can be maximized when the program is comprised of performance scenes directly related to the target task.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.925-930
• /
• 2008

Norovirus has become the most common cause of human gastroenteritis in developed countries. Detection procedures of foodborne viruses from foods require several steps. The concentration step using polyethylene glycol (PEG) is time-consuming and the detection efficiency of reverse transcription-polymerase chain reaction (RT-PCR) is affected by inhibitors from food components. In this study, a rapid detection method based on buoyant density centrifugation was developed to replace the time-consuming chloroform-polyethylene glycol-Tris Tween method. Feline calicivirus that belongs to the family Caliciviridae was used as a surrogate model for norovirus. After artificial inoculation of feline calcivirus (FCV) to oyster and lettuce, 830 ${\mu}L$ of homogenized sample suspension was layered on the top of 670 ${\mu}L$ 20% percoll and centrifuged. Then RNA extraction step was proceeded with the supernatant. By varying several physical conditions, the detection limits were lowered to $2.4{\times}10^2$ PFU per 1 g in oyster and $2.4{\times}10^0$ PFU per 1 g in lettuce. The protocol obtained in this study could be used to develop new detection method for norovirus in foods.

• Journal of Pharmaceutical Investigation
• /
• 제32권3호
• /
• pp.191-197
• /
• 2002

Polymer based physical mixtures or solid dispersions containing solubilizing compositions[OA, tween80 and SLS] were prepared using a spray-dryer. Lovastatin(LOS), simvastatin(SIMS), aceclofenac(AFC) and cisapride(CSP) were selected as poorly water-soluble drugs. Dextrin, poly(vinylalcohol) (PVA), poly(vinylpyrrolidone)(PVP) and polyethylene glycol(PEG) were chosen as solubilizing carriers for solid dispersions. The solid dispersions containing solubilizing compositions without drug were prepared without using organic solvents or tedious changes of formulation compositions. This system could be used to quickly screen the dissolution profiles of poorly water-soluble drugs by simply mixing with drugs thereafter. In case of solid dispersion containing drug, organic solvent systems could be used to solubilize model drugs. The dissolution rates of the drugs were higher when mixed with drug and solid dispersions containing solubilizing compositions. However, solid dispersions of LOS, AFC, and CSP simultaneously containing drug and solubilizing compositions in organic solvent systems were more useful than physical mixtures of drug and solid dispersions without drug except SIMS. Based on solubilizing capability of polymer based physical mixtures in gelatin hard capsules, optimal solid dispersion system of poorly water-soluble drugs could be formulated. However, it should be noted that dissolution rate of poorly water-soluble drugs were highly dependent on drug properties, solubilizing compositions and polymeric carriers.

• Journal of Pharmaceutical Investigation
• /
• 제39권6호
• /
• pp.423-429
• /
• 2009

Liposomes have been used as one of the efficient carriers for drug delivery. In this study, anionic liposomes of which surface was modified by using both electrostaic interaction between anionic liposomes and cationically charged BSA molecules at lower pH than isoelectric point (pI) of BSA and denaturation of the BSA-coated liposomes by thermal treatment. The thermally denatured BSA-coated liposomes (DBAL) had mean particle diameter of 125.2${\pm}$1.7 nm and zeta potential value of -22.4${\pm}$4.5 mV. Loading efficiency of model drug, doxorubicin (DOX), into liposomes was 83.0${\pm}$2.6%. Results of in vitro stability study of DBAL in blood plasma showed that the mean particle diameter of DBAL 400 did not increase in blood plasma and adsorption of plasma protein was much less than plain or anionic liposomes. Intracellular uptake of DBAL 400 evaluated by confocal microscopy observation was higher than that of PEG liposomes.

• 폴리머
• /
• 제28권3호
• /
• pp.232-238
• /
• 2004

약물 전달체로서 메톡시 폴리(에틸렌 글리콜) (MPEG, methoxypolyethylene glycol)과 생분해성 폴리에스테르 계열의 카프로탁톤 ($\varepsilon$-CL, $\varepsilon$-caprolactone)으로 구성된 MPEG-PCL 블록 공중합체를 개환중합을 통해 합성하였다. MPEG-PCL의 결정성과 열적특성은 X선 굴절계와 시사주차열량계를 통하여 분석하였다 모델 단백질로서 알부민 (FITC-BSA, albumin bovine-fluorescein isothiocyanate)과 블록 공중합체를 동결 제분 후, 직접압축 성형방법에 의해 웨이퍼를 제조하였다. 알부민의 방출은 pH 7.4 인산염완충액을 사용하여 37$^{\circ}C$에서 14일 동안 관찰하였다. 알부민의 방출양은 형광분광기를 통하여 FITC의 강도에 의해 결정되었다. 웨이퍼의 형태학적 관찰은 디지털 카메라와 전자주사현미경을 통하여 관찰하였다. 알부민의 방출 속도와 초기 burst는 MPEG-PCL 블록 공중합체의 분절 내에서 폴리(에틸렌 글리롤)의 분자량이 증가할수록 또한 폴리카프로락톤의 분자량이 감소할수록 많은 초기방출과 단축된 방출기간을 보였다.

• Journal of Korean Dental Science
• /
• 제16권2호
• /
• pp.172-181
• /
• 2023

Purpose: To investigate the effect of epidermal growth factor (EGF) with collagen matrix (CM) for increasing gingival thickness. Materials and Methods: In five mongrel dogs, bilateral gingival defects were surgically made on the maxillary canines. After two months, either a subepithelial connective tissue graft (group SCTG) or CM with EGF (0.1 ug/ml, group EGF) was grafted, and the flap was coronally positioned to cover the graft materials. The animals were sacrificed after three months. Intraoral scanning was performed for soft tissue analysis. Histologic and histomorphometric analyses were performed. Result: Two animals exhibited wound dehiscence during the healing phase, leaving three for analysis. No statistically significant difference was found in soft tissue changes (P>0.05). The level of gingival margin (GM) increased in both groups (1.02±0.74 mm in group SCTG vs. 1.24±0.83 mm in group EGF). Linear increases at the GM pre-augmentation in the soft tissue profile were 1.08±0.58 mm in group SCTG and 0.96±0.73 mm in group EGF. Histomorphometric parameters (keratinized tissue height, tissue thickness, and rete peg density) were not significantly different between the groups (P>0.05). Conclusion: EGF loaded onto CM led to comparable gingival phenotype enhancement to SCTG.

• Journal of Periodontal and Implant Science
• /
• 제53권6호
• /
• pp.417-428
• /
• 2023

Purpose: To investigate the effect of xenogeneic collagen matrix (XCM) with polydeoxyribonucleotide (PDRN) for gingival phenotype modification compared to autogenous connective tissue graft. Methods: Five mongrel dogs were used in this study. Box-type gingival defects were surgically created bilaterally on the maxillary canines 8 weeks before gingival augmentation. A coronally positioned flap was performed with either a subepithelial connective tissue graft (SCTG) or XCM with PDRN (2.0 mg/mL). The animals were sacrificed after 12 weeks. Intraoral scanning was performed for soft tissue analysis, and histologic and histomorphometric analyses were performed. Results: One animal exhibited wound dehiscence, leaving 4 for analysis. Superimposition of STL files revealed no significant difference in the amount of gingival thickness increase (ranging from 0.69±0.25 mm to 0.80±0.31 mm in group SCTG and from 0.48±0.25 mm to 0.85±0.44 mm in group PDRN; P>0.05). Histomorphometric analysis showed no significant differences between the groups in supracrestal gingival tissue height, keratinized tissue height, tissue thickness, and rete peg density (P>0.05). Conclusions: XCM soaked with PDRN yielded comparable gingival augmentation to SCTG.

• 대한화학회지
• /
• 제51권1호
• /
• pp.43-50
• /
• 2007

리포솜은 수십~수백 나노미터 크기의 소포체(small vesicle)로서 약물전달에 유용한 구조체이나 체내 혈류 순환계(blood circulatory system)에서 구조적 불안정성에 의해 체내 순환시간이 짧고 세망내피계(reticuloendothelial system)에 의해 소실되어 이를 개선하기 위한 다양한 연구가 시도되고 있다. 본 연구에서는 이당류(disaccharide)로서 락토오스와 슈크로스가 1,2-디스테아로일-sn-글리세로-3-포스포에탄올아민(1,2-Distearoylsn-glycero-3-phosphoethanolamine, DSPE)과 공유결합된 새로운 당-DSPE 유도체를 합성하고 이를 리포솜의 구성성분으로 하는 리포솜을 제조함으로써 리포솜의 표면이 이당으로 수식된 리포솜을 제조하였다. 제조된 리포솜의 입자크기는 대략 100 nm였으며, 표면전하 값은 당이 수식되지 않은 대조군 리포솜이 -10 mV를 나타내었으나 당-DSPE 유도체를 함유한 리포솜의 경우 리포솜 표면에 존재하는 당의 수산화기에 의하여 표면전하의 값은 -25 mV를 나타내었다. 리포솜 내부에 모델약물인 독소루비신(doxorubicin)의 로딩효율은 약 90%를 나타내었다. 당-DSPE 유도체 함유 리포솜의 in vitro 안정성은 혈청 내에서 단백흡착량의 변화 및 리포솜의 입자크기를 관찰하여 평가하였다. 당-인지질 유도체를 함유한 리포솜은 당-인지질 유도체를 함유하지 않은 리포솜 또는 폴리에틸렌글리콜(PEG) 수식 리포솜에 비해 단백흡착의 양과 혈청 내 입자크기의 변화가 적은 것으로 관찰되었다. 이당이 결합된 DSPE와 이를 함유한 리포솜은 혈액내 안정성이 향상되어 체순환계 내에서 장시간 순환이 가능한 약물전달체로서 유용할 것이라 사료된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.