• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.2
• /
• pp.33-40
• /
• 2018

This paper is based on the interim result of ongoing research and development project to develop a software system which support procurement activities, namely PeMSS (Procurement Engineering Management Support System). PeMSS is a system that enables development requirements for each equipment and help designing equipment meeting the purchase requirements. Procurement at EPC (Engineering Procurement and Construction) and operational stage of a plant is an important area that determines the integrity and profitability of the plant. Procurement of unsuitable equipment due to selection of suppliers that do not meet or omit critical requirements in purchase specification can result in enormous cost increase due to such as delay in EPC project, unsatisfactory performance and reduced plant operation time. In spite of the importance of the procurement engineering, there is a lack of support system for systematic preparation of purchase specification, so development of the procurement specification is basically relying on the experience of the engineers in charge. Accordingly, it is needed to develop the PeMSS to help procurement engineers develop procurement specification based on systems engineering approach. This paper introduces the design of the PeMSS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.65-73
• /
• 2006

Network based VPN(Virtual Private Network) using MPLS(Multiprotocol Label Switching) technology, called PE(Provider Edge router) based MPLS VPN, is regarded as a good solution for intranets or ext3nets because of the low cost and the flexibility of the service provision. In this paper, we describe a mechanism that allows the VPN users to move from one site to another site of the VPN network based on the BGP-E MPLS technology. This mechanism is designed for PE(Provider Edge) routers of the backbone network. PE routers connected to the VPN sites establish a new MPLS path to the mobile node after they detect movement of the mobile VPN node. The new location may belong to the same VPN or to different VPN. We desisted VPN management and control functions of the PE routers in order to interface with the Mobile IP protocol and support the QoS mechanism. The pilot implementation and performance measurement were carried out on a simulation using COVERS tool.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.52-62
• /
• 2018

A software support system, called procurement engineering management support system (PeMSS), is currently under development through a joint research project. The procurement-related scenarios considered in this research is as follow: an EPC (Engineering, Procurement and Construction) company receives an EPC project contract and starts the project to deliver the agreed system to the acquirer. In order to acquire the required equipments that the EPC company does not produce by itself, it eventually interacts with subcontractors, also called vendors. The EPC company responsibilities during the procurement activities are twofold. First, the EPC company has to guarantee that it has ordered the equipment, through issuing Purchase Order (PO), based on the requirements stated in the contract. Second, the EPC company has to verify that the received equipment designs, called Vendor Print (VP), meet the specifications in the PO, before finally acquiring the equipments. During our survey study, we discovered that EPC company takes a lot of time and effort to create PO and verify VP, mainly because these activities are performed manually by the responsible engineers. Therefore, we intent to support the above activities by developing a support system to the legacy procurement system that can trace the requirements from the contract to the PO and VP, among other functionalities. At the time of the writing of this paper, PeMMS is still under-development, thus, in this paper we focus on presenting the development steps of PeMMS using systems engineering theory and introducing the PO creation function. Wholly, PeMSS attempts to reduce the time and effort of engineers on the procurements activities while also increasing the quality of the procurement outcomes.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.100-105
• /
• 2001

Microstructural examinations were performed on the anaerobic biofilm from reactor filled with PE support media. Optical microscope, SEM and fluorescent microscope were used for qualitative and morphological studies on the attached microorganism under anaerobic condition. Microorganisms were attached in crevices where protection from shear forces of surfaces where easy to contact with support media surface. A hypothesis for biofilm accumulation occurs on a surface such as polymer support media is presented schematically : 1st step ; cell-support media attachment, 2nd step ; cell-support media attachment and cell-cell attachment, 3rd step ; attached biofilm from neighboring crevices joins together and growing, 4th step ; mature and irregualar biofilm was formed. In SEM photographs, shape and structures of biofilm were observed, but microorganism species and methanogens were not identified. A large number of methanogenic bacteria were identified on the surface of PE substratum by fluorescence under 480nm of radiation and it was estimated that methanogenic bacteria was related to initial attachment of bacteria under anaerobic condition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1147-1150
• /
• 2008

The goal of this research is to apply the neural networks models for the disaggregation of the pan evaporation (PE) data, Republic of Korea. The neural networks models consist of the support vector machines neural networks model (SVM-NNM) and multilayer perceptron neural networks model (MLP-NNM), respectively. The SVM-NNM in time series modeling is relatively new and it is more problematic in comparison with classifications. In this study, The disaggregation means that the yearly PE data divides into the monthly PE data. And, for the performances of the neural networks models, they are composed of training, cross validation, and testing data, respectively. From this research, we evaluate the impact of the SVM-NNM and the MLP-NNM for the disaggregation of the nonlinear time series data. We should, furthermore, construct the credible data of the monthly PE data from the disaggregation of the yearly PE data, and can suggest the methodology for the irrigation and drainage networks system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1560-1563
• /
• 2010

The goal of this research is to apply the neural networks model for the disaggregation of the pan evaporation (PE) data, Republic of Korea. The neural networks model consists of support vector machine neural networks model (SVM-NNM). The disaggregation means that the yearly PE data divides into the monthly PE data. And, for the performances of the neural networks model, it is composed of training and test performances, respectively. The training and test performances consist of the historic, the generated, and the mixed data, respectively. From this research, we evaluate the impact of SVM-NNM for the disaggregation of the nonlinear time series data. We should, furthermore, construct the credible data of the monthly PE from the disaggregation of the yearly PE data, and can suggest the methodology for the irrigation and drainage networks system.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.1-13
• /
• 2014

Potential Energy Surface(PES)를 양자 계산을 통해 알아내는 것은 화학 반응을 이해하는 데에 큰 도움이 된다. 이를테면 Transition State(TS)의 configuration을 알 수 있고, 따라서 reaction path와 활성화 에너지 값을 예측하여, 진행시키고자 하는 화학반응의 이해를 도울 수 있다. 하지만 PES를 그리기 위해서는 해당 분자의 다양한 configuration에 대한 singlet point energy 계산이 필요하기 때문에, 계산적인 측면에서 많은 비용을 요구한다. 따라서 product와 reactant의 구조와 같은 critical point의 정보를 이용하여 최소한의 configuration을 sampling하여 전체 PES를 재구성하는 기계학습 알고리즘을 개발하여 다차원 PES 상에서의 화학반응의 예측을 가능하게 하고자 한다. 본 연구에서는 Barbaralane의 두 안정화 된 구조의 critical point로 하여 이 주변을 random normal distribution하여, B3LYP/6-31G(d) level의 DFT 계산을 통해 relaxed scanning하여 구조와 에너지를 구하였으며, 이 정보를 Support Vector Regression(SVR) 알고리즘을 적용하여 PES를 재구현하였으며, 반응경로와 TS의 구조 그리고 활성화 에너지를 구하였다. 또한 본 기계학습 알고리즘을 바닥상태에서 일어나는 반응이 아닌, 들뜬 상태와 전자 구조가 변하는 화학반응, avoid crossing, conical intersection과 같은 Non-adiabatic frame에서 일어나는 현상에 적용 가능성을 논하고자 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.405-410
• /
• 2006

본 논문에서는 PPVPN(Provider Provisioned VPN)에서 PE(Provider Edge) 기반 모바일 VPN 서비스를 제공하기 위한 네트워크 구조 및 이동성 지원 프로토콜을 제안한다. 제안하는 방안은 RFC2547에 제시된 'BGP/MPLS VPN' 기술을 기반으로 하며, BGP/MPLS VPN 서비스를 제공받고 있는 모바일 사용자가 외부 네트워크로 이동했을 때, 모바일 사용자의 VPN 접속 및 이동성을 지원하기 위해 서비스 제공자 측에 PNS(PPVPN Network Server)를 새로이 도입하였다. PNS는 모바일 사용자와 VPN을 매핑하는 바인딩 정보를 유지하며, 모바일 사용자를 서비스하는 외부 네트워크의 GW와 서비스 제공자 네트워크의 PE간 접속회선으로 IPSec 터널을 설립하도록 지시하고, 그 PE에게 모바일 사용자의 VPN 접속에 필요한 정보를 제공하여 그 PE가 BGP/MPLS 동작에 참여하도록 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.1-4
• /
• 2014

Although physical modeling synthesis is becoming more and more efficient in rich and natural high-quality sound synthesis, its high computational complexity limits its use in portable devices. This constraint motivated research of single-instruction multiple-data many-core architectures that support the tremendous amount of computations by exploiting massive parallelism inherent in physical modeling synthesis. Since no general consensus has been reached which grain sizes of many-core processors and memories provide the most efficient operation for sound synthesis, design space exploration is conducted for seven processing element (PE) configurations. To find an optimal PE configuration, each PE configuration is evaluated in terms of execution time, area and energy efficiencies. Experimental results show that all PE configurations are satisfied with the system requirements to be implemented in portable devices.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.1-8
• /
• 2013

Many PE (pre-erection) blocks are supported by wooden, concrete, or steel supports when they are stocked in the outdoor areas of a shipyard. Their positions and numbers are planned on the basis of the workers' experience. Recently, many shipyards have been making PE blocks with various shapes and weight distributions because of the variety of ships and building technologies. Therefore, it is now necessary to deal with blocks that they have no experience with. We propose a method to conveniently and quickly evaluate the structural safety of PE block supports, without the need for special knowledge and technology related to structural analysis. This method can reduce the large number of man hours (MH) normally needed for the analysis. The three-dimensional grillage analysis is performed for a simplified grillage model of a PE block. For efficiency, the grillage model of the PE block is automatically built from its three-dimensional CAD model, and its weight is also automatically distributed on the grillage model. The integrated system has been comprehensively implemented to perform the grillage analysis for the reaction forces on block supports. This paper describes how to make a grillage model of a PE block and estimate the weight distribution of the block on this grillage model. These steps are verified by comparing the supports reaction forces to those of the 3D finite element analysis for the PE blocks that are provided by a shipyard.