• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.635-638
• /
• 2005

An energy recovery sustaining driver with zero current switching to reduce switching losses and EMI is presented in this paper. The driver with designed snubber circuits reduces ringing voltage significantly on PDP so that the voltage rating of MOSFETs can be lower as well to reduce the cost of switches.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.95-98
• /
• 2003

Tin doped indium oxide(ITO) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, liquid crystal display, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ITO films with the optimum growth conditions showed resistivity of $2.36{\times}10^{-4}(\Omega}-cm$ and transmittance of 86.28% for a film 680nm thick in the wavelength range of the visible spectrum.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.267-269
• /
• 1994

Various types of plasma display panels(PDPs) have been developed to realize the flat panel display device. But, many of its characteristics must be improved before it can be commercialized. In order to investigate tile characteristics of micro discharge in a PDP ceil, we have constructed a micro-gap discharge system whose electrode gap can be adjustable between $100-1000{\mu}m$ within $0.1{\mu}m$ accuracy. We measured the minimum sustain voltage, current, delay time of discharge while changing parameters(electrode gap distance, electrode surface area, pressure) which influence discharge characteristics.

• Analytical Science and Technology
• /
• v.25 no.2
• /
• pp.127-132
• /
• 2012

A test tool for self-leveling and flowing characters of coating materials used to semiconductors and electronic parts, especially for protection of LCD and PDP connectors, was designed, and the test tool was evaluated using polymeric siloxane coating materials which have various viscosities. The test results showed that the designed test tool was effective to measure self-leveling and flowing properties of coating materials. Therefore, considering that the viscosity is not directly correlated with self-leveling and flowing properties, we believe that this test tool will be a very useful tool for measurement instead of classical method using viscosities of coating materials. Particularly, the measurement of self-leveling and flowing properties using the test tool would be expected to be used in the area of selecting suitable protective coating materials for LCD (Liquid Crystal Display), PDP (Plasma Display Panel) and semiconductor connection parts.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.213-213
• /
• 2003

저온소성 가능하며 저 융점유리인 고 투과율의 Pb-free 조성으로서 PDP(Plasma Display panel)의 투명유전체에 응용하고자 P$_2$O$_{5}$-ZnO-RO 계인 인산염 유리의 열적, 광학적성질을 연구하였다. 이 삼원계인 인산염유리계를 PDP의 투명 유전체에 응용하기에는 열적특성에서 문제점이 제기되어, (30-50)P$_2$O$_{5}$ - (20-50)ZnO - (15-45) RO (mol%)계에 유리망목형성제인 A1$_2$O$_3$, SiO$_2$, B$_2$O$_3$등을 첨가하여 열적성질 및 소성후 투광성 등을 조사하였다. 열적특성은 DTA와 TGA를 이용하여 유리전이점(Tg) 및 선팽 창계수(CTE)와 연하점(Ts) 을 측정하였으며, 투광성은 500-58$0^{\circ}C$에서 1시간동안 소성하여 UV-visible spectrometer을 이용하였다 그 결과로, 380-46$0^{\circ}C$의 Tg와 8-$10^{-6}$K의 CTE 및 70-80%의 광투과율을 나타내었다. 이러한 결과는 P$_2$O$_{5}$-ZnO-RO계는 PDP의 투명유전체에 적용하기에는 상당히 높거나 낮은 Tg를 형성하였지만 유리형성제를 수 mol%을 첨가함으로써 적절한 Tg점과 높은 투과율을 얻을 수 있었다.수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1074-1077
• /
• 2003

우리는 AC-PDP에서 휘도와 효율을 향상시키기 위하여 Ne-Xe(4%)와 He(7)-Ne(3)-Xe(3%)에 소량의 Ar 또는 Kr를 첨가하여 최적의 페닝 방전가스 혼합비를 연구하였다. 우리는 이것을 증명하기 위해 효율과 Q-V 방법을 이용하여 벽전하를 계산하였으며, 2차원 시뮬레이션에서의 결과값과 비교하였다. 200 Torr 압력에서 He-Ne-Xe 또는 Ne-Xe에 소량의 Ar(0.01-0.1%) 또는 Kr(0.01-0.1%)을 첨가시켰을 때, 우리는 20% 이상의 휘도의 증가와 25% 이상의 효율 증가를 발견하였고, 또한 벽전하도 25% 이상의 증가를 보였다. 400 Torr 압력에서 He-Ne-Xe-Kr(0.005%)에 소량의 Ar(0.005-0.1%)를 첨가시켰을 때는 8% 이상의 휘도의 증가와 18% 이상의 효율 증가, 12% 이상의 벽전하 증가를 확인하였다. 결론적으로 이 결과는 He, Ne, Ar, Kr 사이에 추가적인 페닝효과가 휘도와 효율을 향상시켰다는 것을 보여준다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1096-1099
• /
• 2004

The principal problems in development of dielectric paste materials for PDP(plasma display panel)are PbO free paste and low melting temperature. We prepared PbO free paste from glasses in the system BaO-ZnO-$B_2O_3$-$V_2O_5$. DTA, and XRD were used to characterize BaO-ZnO-$B_2O_3$-$V_2O_5$ glasses. In this present study, PbO free paste had thermal expansion of $74\times10^{-7}/^{\circ}C$, DTA softening point of $460^{\circ}C$, and firing condition of $520^{\circ}C$, 20min

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.48-54
• /
• 2004

We have developed a new experimental driving system in order to make an easier drive experiment of PDP. By using the system, we can design and simulate the timing of the pulse in computer environment. As a result of the designed timing, we are able to program at PLD(Programmable Logic Device) and control high-voltage FET switches. The new system can reduce the time of the pulse compared with the previous logic gate ICs that realizes switching logic through hardware. In addition, it is a much easier way of changing the timing of the pulse due to the change of the driving method. By using the developed driving system we experimented on two different things- First, the realization of ADS Driving Method that run commonly; Second, gray scale realization on the three electrodes AC PDP.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.71-74
• /
• 2006

A new multi-output LLC resonant converter is proposed for high efficiency and low cost plasma display panel (PDP) power module. In the proposed converter, zero-voltage (ZV) turn-on of the primary MOSFETs and zero-voltage (ZC) turn-on and turn-off of the secondary diodes are guaranteed in the overall input voltage and output load ranges. In addition, the primary MOSFETs and the secondary diodes have the low voltage stresses clamped to input and the output voltages, respectively. Therefore, the proposed converter shows the high efficiency due to the minimized switching and conduction losses. Moreover, by employing the transformer with multiple secondary windings, the proposed converter can have multiple outputs, which show the great crossregulation characteristics. Therefore, the proposed converter is suitable for high efficiency and low cost PDP power module.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.716-719
• /
• 2007

The effects of the evaporation rate of MgO films using an electron beam on the MgO properties and the discharge characteristics of a plasma display panel (PDP) were investigated and analyzed. MgO films were deposited with the various MgO evaporation rates. The MgO properties such as the crystal orientation, the surface roughness, and the film structure were inspected using XRD (X-ray diffraction), AFM (atomic force microscopy). From the experiments and Paschen law, the maximum value of the secondary electron emission coefficient $({\gamma})$ was obtained at the evaporation rate of $5{\AA}/sec$. The XRD results and cathode-luminescence (CL) spectra show the ${\gamma}$ values are correlated with F/F+ centers of the molecular structure of MgO films. The minimum firing voltage and the maximum luminous efficiency were obtained at an evaporation rate of $5{\AA}/sec$. In the MgO film deposited at $5{\AA}/sec$, the (200) orientation and F+ center were most intensive.