• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3045-3047
• /
• 1999

This paper deals with a single flexible link robot system using two fuzzy logic controllers(FLC). The one is used for controlling the rigid position of the beam while it is rotated from one position to another. The other is adopted to reduce the oscillation caused by the rigid body motion. Many simulations are carried out to investigate characteristics of the controlled system. There are good results compared with other systems using PD controller. And also the system could be exactly controlled by the proper setting conditions for FLC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1034-1036
• /
• 1996

In this paper, an adaptive fuzzy logic controller is presented for auto-tunning of the scaling factors by using learning capability of neural networks. The proposed scheme consists of the FLC which includes the PI-type FLC and PD-type FLC in parallel form and the neural network which learns scale factors of FLC. Computer simulations were performed to illustrate the effectiveness of a proposed scheme. A proposed FLC controller was applied to the second order system and velocity control of the brushless DC motors. For the design of the FLC, tracking error, change of error, and acceleration error are selected as input variables of the FLC and three seal e factors were used in the parallel-type FLC. This scheme can be used to reduce the difficulty in the selection of the scale factors.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권3호
• /
• pp.185-191
• /
• 2008

In this paper, experimental studies of a neural network (NN) control technique for non-model based position control of the x-y table robot are presented. Decentralized neural networks are used to control each axis of the x-y table robot separately. For an each neural network compensator, an inverse control technique is used. The neural network control technique called the reference compensation technique (RCT) is conceptually different from the existing neural controllers in that the NN controller compensates for uncertainties in the dynamical system by modifying desired trajectories. The back-propagation learning algorithm is developed in a real time DSP board for on-line learning. Practical real time position control experiments are conducted on the x-y table robot. Experimental results of using neural networks show more excellent position tracking than that of when PD controllers are used only.

• Nuclear Engineering and Technology
• /
• 제25권2호
• /
• pp.222-232
• /
• 1993

원전증기 발생기 수위제어용 두개의 퍼지 알고리듬을 개발하였다. 즉, 증기 및 급수유량사용이 가능한 고출력 경우와 이들의 사용이 불가능한 저출력시등 용도를 분리하여 별도의 알고리듬으로 개발한 것이다. 이들 알고리듬은 고출력시의 경우 PID형태의 제어기로 변환시켰고 저 출력시의 경우 2차함수 형태의 제어기로 변환시켰다. 이들제어기는 한국원자력 연구소 보유 Compact Nuclear Simulator에서 각각 4개의 모의 운전을 통하여 실험하였다. 실험결과, 두 경우 모두 Simulator에서 사용되고 있는 PID제어기에 비하여 약 50%의 제어량으로 수위곡선 및 유량차이의 총 변화량이 절반이하가 되도록 제어가 가능했다. 고출력의 경우, 이는 수위 및 유량등을 입력으로 하는 PI제어기 대신 같은 입력의 PD제어기를 속도 알고리즘으로 사용한 점이 근본적인 차이로 볼 수 있으며 저 출력시의 경우는 수위를 입력으로 하는 PI제어기 대신에 적은 비율의 'I'성분을 포함하는 PID제어기를 사용하였으며 'D'성분입력과 제어기 출력에 각각 평균간을 사용한 것이 주 차이점이라 할 수 있다.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.114-129
• /
• 1996

This paper describes the whole development phase for the underwater vehicle actuating system with high hydroload torque disturbance. This includes requirement analysis, system modeling, control algorithm design, real time implementation, test and performance evaluations. As for driving control algorithms, fuzzy logic, variable structure and PD(Proportional-Differential) algorithm were designed and implemented on board controller using a single chip microprocessor. Intel 8797. And test and performance evaluation is carried out both single test and wystem integration test. We could confirm the basic performance of actuating system through the single test and gereral developing work of any actuating systems was finished with a single performance test of actuating system without system integration test. But, we suggested that system integration test be needed. System integration test is carried out using G/C HILS(Guidance and Control Hardware-In-the -Loop Simulation) which is constituted flight motion simulator, load simulator, real time host computer and the related subsystems such as inertial navigation system, power supply system and Guidance and Control Computer etc.. The most important practical contribution of this paper is that full system characteristics such as minimal control effort, enhancement of guidance and autopilot performance by the actuating system using G/C HILS technique are investigated. Through full running G/C HILS, in spite of the passing to single tests, some control algorithm resulted in failure as to stability of full system and system time frame.