• 대한전기학회논문지:전력기술부문A
• /
• 제49권5호
• /
• pp.205-211
• /
• 2000

This paper presents an optimal design method for fuzzy logic controller (FLC) of HVDC using an Adaptive Evolutionary Algorithm(AEA). We have proposed the AEA which uses a genetic algorithm (GA) and an evolution strategy (ES) in an adaptive manner in order to take merits of two different evolutionary algorithms. The AEA is used for tuning fuzzy membership functions and scaling constants. Simulation results show that disturbances are well damped and the dynamic performances of FLC have better responses than those of PD controller when AC system load changes suddenly.

• 전자공학회논문지CI
• /
• 제37권5호
• /
• pp.19-28
• /
• 2000

구륜 이동 로봇(Wheeled Mobile Robot)은 제어기 설계에 있어 Nonholonomic Constraints등에 의해 많은 어려움을 지닌다. 본 논문에서는 구륜 이동 로봇의 제어를 위해 PD와 퍼지 시스템이 결합된 제어기가 설계되며, 유전알고리즘에 기초되어 최적 퍼지시스템이 형성된다. 시스템의 최적화 과정은 독립적으로 수행되는 여러 단계들로 이루어지며, 각 단계마다 다른 형식의 알고리즘이 적용되며 효율적 탐색을 위해 Niche알고리즘 및 면역 알고리즘이 결합되어 적용된다. 각 출력용어집합은 최적의 원소들을 얻기 위해 수행되는 탐색에 의해 그 구성이 변화되며, 변화된 출력용어집합의 구성 원소와 관계된 규칙기반이 동시에 조절된다. 출력용어집합의 추가된 원소들 및 조절된 규칙에 대한 적합성이 평가되고 제어 성능의 향상에 기여하지 못한 부분들은 제거된다. 출력변수의 용어집합 및 규칙에 대한 반복적 조절 과정이 완료된 후, 입력 소속함수들에 대한 조정이 제약조건을 가지고 수행되며, 진화연산에 의한 출력소속함수들에 대한 조정이 수행된다.

• 한국지능시스템학회논문지
• /
• 제7권3호
• /
• pp.81-88
• /
• 1997

This paper dealt with the position control of a flexible miniature finger driven by piezoelectric bimorph cells, cemented on both side of the finger. Bending moments generated by cells drives the finger, and end-point of the finger is controlled, so as to move in synchrony with fluctation of target and maintain a constant distance between target surface and inger's tip. The voltage applied for the cell is controlled by tip displacement error and error rate. We proposed a PD-Fuzzy controller under conception of PD control strategy. It brought and advantage which reduce number of rules than that of same type conventional fuzzy system and more correct redponse than PID control results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.524-527
• /
• 1995

In most cases, a crane is controlled by an open-loop technique. That is, the controller tries to follow a given velocity profile that is designed to minimize the swing of rope and the transfer time. But such a system is not capable of handling various disturbances such as changing rope length and wind effect. In order to overcome this kind of difficulty, this research focuses on the design of a feedback controller using intelligent techniques such as fuzzy logic and neural network. These intelligent techniques has been emplyoyed in order to represent human knowledge and to imitate human learning. The deveped controllers have been evaluated via computer simulation

• 한국정보통신학회논문지
• /
• 제11권5호
• /
• pp.1019-1028
• /
• 2007

본 논문에서는 적응진화알고리즘을 사용한 퍼지 제어기의 설계방법을 제안하였다. 적응진화알고리즘은 전역탐색특성이 우수한 유전알고리즘과 다음세대를 포함하는 해집단에 대해 적응적으로 우수한 국부탐색특성을 가진 진화전략을 사용한다. 재교배 과정에서 유전알고리즘과 진화전략을 위한 해집단의 분배는 적합도에 따라서 적응적으로 결정된다. 적응진화알고리즘은 퍼지제어기의 설계 파라메터인 퍼지변수에 대한 소속함수와 스케일 요소를 결정하는데 사용된다. 제기된 퍼지제어기의 성능을 평가하기 위해서 비선형 특성을 가진 실제 DC 모터 속도제어 시스템을 구성하여 실험하였으며, 실험결과 PD제어기의 경우보다 우수한 속도 제어성능을 가짐을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.738-741
• /
• 1995

This disseration realized the simple digital controller board using ${\mu}$-PD 70320 microprocessor has characteristics that are low cost, simple hardware organization, convenient and interchangeable with the 8086 for the servo system. We gave the control algorithm such as PD control. Self tuning adaptive control and Fuzzy control to the realized controller board and made a new real number data type for a high accuracy control. Users can select of suitable for the control algorithim. In the result of simulation and experiment shown a good performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.650-652
• /
• 2000

Although Fuzzy Logic Controller(FLC) adopted three terms as input gives better performance. FLC is in general composed of two-term control because of the difficulty in the construction of fuzzy rule base. In this paper, a three-term FLC which is similar to PID control but acts as a nonlinear controller is proposed. To reduce the complexity of the rule base design and increase efficiency, a simplified fuzzy PID control is induced from a hybrid velocity/position type PID algorithm by sharing a common rule base for both fuzzy Pi and fuzzy PD parts. It is simple in structure, easy in implementation, and fast in calculation. The phase plane technique is applied to obtain the rule base for fuzzy two-term control and them. The resultant rule base is Macvicar-Whelan type. The frequency response information is used in tuning of membership functions. Also a tuning strategy for the scaling factors is Proposed based on the relationship between PID gain and them. Simulation results show better performance and the effectiveness of the proposed method.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.109-114
• /
• 2002

Various inverted pendulum systems have been frequently used as a model for the performance test of the proposed control system. We first identify a rotary-type inverted pendulum system by the Euler-Lagrange method and then design a FLC (Fuzzy Logic Controller) fur the plant. FLC`s are one of useful control schemes fur plants having difficulties in deriving mathematical models or having performance limitations with conventional linear control schemes. Many FLC`s imitate the concept of conventional PD (Proportional-Derivative) or PI (Proportional-Integral) controller. That is, the error e and the change-of-error are used as antecedent variables and the control input u the change of control input Au is used as its consequent variable for FLC`s. In this paper we design a simple-structured FLC for the rotary inverted pendulum system. We also perform some computer simulations to examine the tracking performance of the closed-loop system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.441-446
• /
• 1992

We propose a control architecture for the fuzzy logic control of robot manipulators and a rule base derivation method for a fuzzy logic controller(FLC) using a neural network. The control architecture is composed of FLC and PD(positional Derivative) controller. And a neural network is designed in consideration of the FLC's structure. After the training is finished by BP(Back Propagation) and FEL(Feedback Error Learning) method, the rule base is derived from the neural network and is reduced through two stages - smoothing, logical reduction. Also, we show the performance of the control architecture through the simulation to verify the effectiveness of our proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.221-223
• /
• 2000

This paper describes the design of SVC fuzzy logic controller (SVC-FLC) using adaptive evolutionary algorithm and we tuned the gain of input-output variables of SYC-FLC using it. We performed the nonlinear simulation on an single-machine infinite system to prove the efficiency of the proposed method. The proposed SYC-FLC showed the better performance than PD controller in terms of the settling time and damping effect, for system operation condition used in evaluating the robustness and three phase grounding default in cases of nominal loading used in tuning SVC-FLC for a single-machine infinite system.