• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.85-86
• /
• 2008

케이블의 원가절감을 위해 절연체의 절연두께를 줄이거나 초초고압화가 되어 갈수록 절연성능의 신뢰성 향상이 한층 요구되고 있다. 이를 위해 케이블 및 접속함의 절연체 내에 각종의 결함이 어느 정도 절연성능을 떨어뜨리는지 정량적으로 파악하여 개선할 필요가 있다. 또한 완제품 내 잔족하고 있는 이물의 종류 및 위치를 알 수 있으면 생산공정 내에서 이물 유입 경로를 파악하여 이물이 유입되는 것을 차단할 수 있다. AC내전압 파괴시험을 수행할 때 설계치 보다 저전계에서 파괴될 경우 파괴공을 조사하여 원인을 규명하고자 하지만 국부적인 결함으로 인한 파괴는 결함부를 소실시키기 때문에 파괴공 및 주위의 절연체를 현미경으로 관찰하여도 찾기가 어렵다. 따라서, 전원을 고속으로 차단하여 결함부가 완전히 소손되는 것을 막고 PD발생 위치를 추정하여 결함을 확인하는 방법이 요구 되어진다. 이러한 시험 방법을 전구차단법 이라고 하며, 고도의 PD측정기술과 판정기술이 필요한 종합적인 기술이다. 본 논문에서는 PPD 기술의 핵심인 노이즈 제거 기술과 판별기술을 서술하고 실제 접속함(PMJ)에 적용하여 PPD 기술의 유효함을 증명하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1771-1773
• /
• 2001

This paper deals with the numerical estimation of the bubble behavior and the partial discharge(PD) initiation voltage basis of electric field calculation with the coaxial coil layer-to-cylindrical electrode system for the simulation of high temperature superconducting coils. The theoretical results of bubble behavior and the PD initiation voltages showed fairly good agreements with the experimental results.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.567-571
• /
• 2004

Recently, GIS(Gas Insulated Switchgear) has been recognizing of importance on development of diagnosis technique which is happened problem on confidence for a long time use. Therefore, the measurement and analysis of PD with prior phenomenon of insulation breakdown is used many method of diagnosis for GIS. In this paper, we simulate trouble condition in DS and analysis trouble signal to use electrical and mechanical methods, interpretation of detected signal has analysed with to use ø-q-n pattern and neural network. For this analysis, we have used the induction and AE(acoustic emission) sensors. For the simulation experiment, we make DS for 170 KV GIS and analyze the classification and characteristics of detected signals with the application of neural network algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2212-2214
• /
• 1999

In this paper, a novel Generator On-line Diagnosis System (GODS) is proposed. This system monitors the insulation condition of the stator winding by on-line measurements of partial discharge (PD). Sensor, such as SSC (Stator Slot Coupler) and RFCT (Radio Frequency Current Transformer) are used for PD measurement. PD signals are continuously measured and digitized with a high speed A/D converter to build the database of the generator's insulation condition. Also this system can communicate with the central monitoring system via RS-485. This helps more efficient operation and maintenance of the generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2057-2059
• /
• 1999

This paper describes the phenomena of the refraction and reflection when the ultrasonic signals generated by PD(Partial Discharge) in a transformer propagate through the boundary between insulating oil and the tank of the transformer. In this paper, considering the characteristic of the ultrasonic signal and the velocity of the propagation in medium, propagation time from PD source to sensor for incidence angle was calculated. As a result, it was found that the shortest time at specific angle exists. Taking into account the velocity of the propagation in medium, the shortest time with a computer was simulated. It was shown that the simulation was same as experimental result at a real PD source in the transformer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1776-1778
• /
• 2003

Partial Discharge(PD) pulses propagate in gas insulated substation(GIS) with rise time shorter than one nanosecond. Therefore, Ultra high frequency(UHF) couplers which have ultra wide band(UWB) characteristics from hundreds of MHz to several GHz are desirable for the detection of the PB pulses in GIS. In this paper, the authors proposed a log-periodic antenna for GIS PD detection. Various parameters of the coupler such as frequency bandwidth, coupler gain, radiation pattern, coupler geometry were considered through the simulations and the experiments together.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1843-1844
• /
• 2003

154 kV급 가스절연개폐장치(GIS)용dp 장착할 수 있는 내장형 극초단파 (UHF) 부분방전(PD) 센서의 고주파 특성을 전산모사 하였다. UHF PD 센서는 일종의 광대역 안테나이므로 3차원 전자기장 해석도구를 활용하여 주파수 또는 시간 영역에서 고주파특성을 해석하였다. 센서의 구조를 결정하는 센서장착용 구멍과 센서의 크기를 변수로 조절하면서 내장형 UHF PD 센서의 특성을 해석 하였다. 센서가 장착되는 구멍의 크기와 센서의 구조변화에 따라 반사손실이 변화하였으며 GIS의 전파 mode의 영향을 받는다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.497-498
• /
• 2006

본 논문에서는 전력기기의 고체 절연물내에서 발생하는 전기트리의 진전양상 및 그에 대한 PD 분포 특성을 Hn(q), $Hn(\Psi)$, $Hq_{avg}{\Psi})$, $Hq_{max}(\Psi)$로 표현하였다. 또한 통계적 분포의 변화정도를 나타내어 정량적으로 확인을 하고자 하였다. 논문에서 사용한 트리 결함은 침-평판 트리, 보이드트리, 고체절연물내 이물트리 등 세 가지 경우이며, 각각의 트리 진전에 대한 특성은 서로 다른 특성을 보이는 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1774-1777
• /
• 1996

In this paper, applicability of SI-PD(switching impulse - partial discharge) testing method was put on an attempt as a newly proposed diagnostic method for the underground distribution power cable system in Korea. For this purpose, SI-PD testing equipment was designed, and tests were performed using artificial needle-type defects integrated into the 22.9 kV CN/CV cables in drder to prove its reliability. As a result, arc noises, generated from spark gap, were considerably decreased by use of a pneumatic switch immersed into oil, and artificial needle-type defects were well detected with impulse voltage level under $2U_0$. These results imply that it is likely possible to apply SI-PD measurement method as a the nondistructive test for the 22.9 kV CN/CV cable system in Korea.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.114-119
• /
• 2016

This paper dealt with the propagation characteristics of acoustic signal in insulation oil for the purpose of improving the reliability of AE (acoustic emission) method used for condition monitoring of oil-immersed transformers. A discharge source was placed in insulation oil and AE sensors ($f_c$ :140 kHz) were attached on the oil tank to study the changes of velocity and propagation path with the depth and distance. The average velocity was 1,436 m/s and the velocity decreased with the increase of depth from the oil surface to 430 mm. The propagation paths were classified into three sections by the shortest reflection path of the detected signal. The minimum distinguishable distance in each section was 70 mm. It was also verified that PD (partial discharge) with a magnitude over than 500 pC can be detected by the AE sensors.