• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.922-926
• /
• 2013

3,3',4,4'-Tetrachlorobiphenyl (IUPAC PCB77) is one of seven indicative polychlorinated biphenyls (PCBs) in the surface sediments. The current study presents a novel polyclonal antibody for the determination of the PCB77 using indirect competitive enzyme-linked immunosorbent assay. Under optimum conditions, PCB77 was determined within the concentration range of 0.01-100 ${\mu}g\;L^{-1}$, with a detection limit of 0.057 ${\mu}g\;L^{-1}$. The assays were tested for their cross-reactivity profiles using 3 selected congeners and 4 Aroclor products. The assays were highly specific for coplanar PCB congeners, but less specific for Aroclor1248. The spiked recoveries from five sediment samples were 86%-114% for PCB77 from ELISA, which were satisfactory. The current study demonstrated that the developed antiserum and immunoassay procedure can be used to detect PCB77 in environmental samples. The results of the sediment analysis were confirmed by conventional GC/ECD.

• The Korean Journal of Physiology and Pharmacology
• /
• v.28 no.4
• /
• pp.323-333
• /
• 2024

Polychlorinated biphenyls (PCBs) were once used throughout various industries; however, because of their persistence in the environment, exposure remains a global threat to the environment and human health. The Kv1.3 and Kv1.5 channels have been implicated in the immunotoxicity and cardiotoxicity of PCBs, respectively. We determined whether 3,3',4,4'-tetrachlorobiphenyl (PCB77), a dioxin-like PCB, alters human Kv1.3 and Kv1.5 currents using the Xenopus oocyte expression system. Exposure to 10 nM PCB77 for 15 min enhanced the Kv1.3 current by approximately 30.6%, whereas PCB77 did not affect the Kv1.5 current at concentrations up to 10 nM. This increase in the Kv1.3 current was associated with slower activation and inactivation kinetics as well as right-shifting of the steady-state activation curve. Pretreatment with PCB77 significantly suppressed tumor necrosis factor-α and interleukin-10 production in lipopolysaccharide-stimulated Raw264.7 macrophages. Overall, these data suggest that acute exposure to trace concentrations of PCB77 impairs immune function, possibly by enhancing Kv1.3 currents.

• The Korean Journal of Pesticide Science
• /
• v.20 no.3
• /
• pp.203-210
• /
• 2016

Polychlorinated biphenyls (PCBs) are ubiquitous environmental contaminants, found in the many environments. PCBs exerts various toxicological effects, including endocrine-disrupting activity. Most researches with these toxicants performed with soil matrix with mixtures of congeners, namely Aroclor, while the biological activities have been tested with animals. However, studies with pure congeners are limited. In this study, 5 congeners were synthesized and their fates (bioaccumulation, degradation, kinetics) were studied in carrot-soil system. The soil half-lives of biphenyl, PCB-1, PCB-3, PCB-77, and PCB-126 were 20.2, 16.0, 11.6, 46.5, 198.0 days, respectively. In general, the longer half-lives were observed with the higher hydrophoicity of PCBs. Times, required for maxium accumulation of PCBs in carrot (Tmax) were 10-20 days for most congeners and the concentrations were 0.4-2.6 mg/kg. The concentrations of PCBs in carrot were kept as constant after Tmax, except PCB-126. The concentration ratio between carrot and soil after 90 days of treatment were 1.7, 8.1, 1.9, 1.8, and 5.9 for biphenyl, PCB-1, PCB-3, PCB-77, and PCB-126. Because of the increase of biomass, the total residual amount of PCBs in carrots however, increased till the end of experiment. The portions of PCB-126 in carrot were 1.1% of the soil residues at 90 days after planting.

• Journal of Environmental Science International
• /
• v.20 no.8
• /
• pp.987-995
• /
• 2011

Co-planar PCBs(polychlorinated biphenyls) of non-ortho are investigated in soil and ginseng on the North Gyeongbuk with HRGC/HRMS. PCB77 in soil on Yeongju and Sangju are detected 0.0007 pgTEQ/g and 0.0009 pgTEQ/g, respectively. PCB81 in soil on Yeongju and Sangju are detected 0.0113 pgTEQ/g and 0.0108 pgTEQ/g, respectively. Also PCB126 in soil on Yeongju and Sangju are detected 0.0907 pgTEQ/g and 0.0944 pgTEQ/g, respectively. But PCB169 in soil on Yeongju and Sangju is not detected. Total Co-planar PCBs of non-ortho in soil on Yeongju and Sangju are 0.1027 pgTEQ/g and 0.1061 pgTEQ/g, respectively. PCB77 in ginseng on Yeongju and Sangju are detected 0.0008 pgTEQ/g. Then PCB81 in ginseng on Yeongju and Sangju are detected 0.0104 pgTEQ/g and 0.0112 pgTEQ/g, respectively. But PCB126 in ginseng on Yeongju and Sangju are detected 0.0585 pgTEQ/g and 0.0579 pgTEQ/g, respectively. PCB169 in ginseng on Yeongju and Sangju is not detected. Total Co-planar PCBs of non-ortho in ginseng on Yeongju and Sangju are 0.0697 pgTEQ/g and 0.0700 pgTEQ/g, respectively. Relationship of PCBs in between soil and ginseng shown significance($R^2$ : 0.99).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.752-757
• /
• 2018

This study presents the performance evaluation results of a 77-GHz waveguide slot array antenna that was fabricated by attaching a patterned printed circuit board(PCB) on a metal block. The 77-GHz waveguide was divided into a top plate and a bottom structure. The top plate was fabricated using a patterned PCB that can implement a fine slot at low cost. The top cover was then bonded to the bottom metal structure with a waveguide trough using anisotropic conductive film. For evaluating the antenna performance, a $1{\times}16$ slot array antenna was fabricated using our proposed method and the gain and pattern were measured and compared with the simulation results. Though the measurement results demonstrate a reduction in gain of around 2.3~3.5 dB compared to the simulation results assuming ideal bonding conditions, the pattern hardly changed and the slot antenna with a gain of approximately 17 dBi at 77 GHz can be easily manufactured at a low cost using the proposed method.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.73-85
• /
• 2006

Blood serum concentrations of polychlorinated biphenyls (PCBs) were measured in employees who worked at a municipal solid waste incinerator (MSWI), members of residential community who lived near the MSWI (<0.3km) and members of residential community lived far from the MSWI (>10 km). Human blood serum samples were analyzed for all PCB congeners using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The mean levels of total PCBs and dioxin-like PCBs in 87 serum samples were 242.77 ng/g lipid and 8.83 TEQ pg/g lipid, respectively. The PCB homologue profiles showed that penta-, hexa-, hepta-chlorinated biphenyls contributed more than 80% of the total PCBs concentration. The most abundant congeners were PCB153, PCB138, PCB180, PCB187, PCB118. A statistical analysis was performed to determine whether there were significant correlations between PCB concentrations and specific variables such as age, gender, smoking habits, occupation, BMI (Body Mass Index) and time of residence. As a result, the age was found to be strongly correlated with serum PCB concentrations. In addition, there were strong correlations between total PCBs and PCB153 (r=0.93, p<.0001), dioxin-like PCBs and PCB118 (r=0.98, p<.0001). So these two congeners are satisfactory indicators for total PCB concentrations and dioxin-like PCBs in human blood respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.73-77
• /
• 1999

Revolutionary changes on multimedia, network and PDA(Personal digital assistants) causes PCB(Printed circuit beard) manufacturers to change their attitudes to product. Traditional idea for current market such as price, market, and service has collapsed down and new digitalization urges PCB manufacturers to deal with new technologies, shorter lead time with reasonable price, high qualities. Therefore PCB manufacturers have an effort to develop new marketing, products, processes for low cost to keep up pace with assembly makers.

• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.309-319
• /
• 2003

This study was performed to describe analysis method of 209 PCB congeners in ambient air samples. The samples were collected by high volume air sampler in Chonju city. Extracted samples were cleaned by silicagel cleanup modified with sulfuric acid and activated carbon cleanup processing. The cleaned samples were analyzed by high resolution gas chromatography and high resolution mass spectrometry (HRGC/HRMS) with DB-5 column (60 m, 0.25 mm i.d., 0.25 m film thickness) to analyze the 209 kinds of PCB congeners. PCBs levels of air samples were detected to the range between 0.003 and $0.163pg-TEQ/m^3$. The PCBs congener of 162 kinds were detected in samples analysed using DB-5 column and 37 kinds peaks were overlapped with congeners more than one. It is difficult to isolate PCB 118/106 and PCB 105/127 in coplanar PCB, so it is likely to overestimate the concentration.. The distribution of coplanar-PCB congeners in origin source samples (Kanechlor and exhaust gas from incinerator) was compared with that in air samples, and PCB 81, PCB 77, PCB 126, and PCB 169 were higher in incinerator samples.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.77-77
• /
• 2014

솔더링과 와이어본딩이 가능한 ENEPIG (Electroless Nickel/Electroless Palladium/Immersion Gold) 를 중심으로 미세회로 기판에 적용할 수 있는 표면처리 및 공정 약품을 소개하고자 한다.

• Tribology and Lubricants
• /
• v.29 no.2
• /
• pp.77-84
• /
• 2013

A small engine-oil-deterioration detection sensor was developed and installed at the tip of a dipstick gage. The sensor part was manufactured using printed circuit board (PCB) manufacturing technology. A set of sensor covers was installed in order to protect the sensor and realize good signal stability. The small engine-oil-deterioration detection sensor system comprised a dual sensor having etched copper electrodes coated with gold and ceramic, a flexible PCB (FPCB) acting as electric wire, and a dummy PCB with only a lock connector. The sensor can easily be installed by insertion through the guide tube of a dipstick gage. Thus, a driver can easily handle it without further installation equipment. The sensor can determine the level of deterioration in the engine oil by estimating the corresponding dielectric constant of the engine oil.