• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.190-191
• /
• 2019

최근 신재생 에너지와 ESS와 같은 분산 전원의 사용이 점차 늘어나면서, 이들을 제어하는 전력 변환 장치에 대한 기대치는 점점 상승하고 있다. 특히 DC 1500V에 대한 요구 및 고 효율, 고 전력밀도에 대한 요구는 최근 Wide band gap 소자의 발전과 함께 산업계 전반에 주요한 이슈이다. 본 논문은 이러한 요구를 만족하기 위한 Hybrid ANPC의 설계를 논하도록 한다. 구성의 정합성을 확인하기 위해, 손실 분석이 진행될 것이며, 최근 SiC 모듈의 발전 방향인 Press-fit type의 설계에 맞춰 Power PCB 설계를 위한 모의 실험을 진행한다.

• Journal of Institute of Convergence Technology
• /
• v.1 no.1
• /
• pp.34-40
• /
• 2011

In this paper, a hybrid design tool combining one-dimensional(1D) lumped model and three-dimensional computational fluid dynamics(CFD) approach has been developed in order to evaluate the performance of inkjet print head and droplet control process are studied to reduce the deviations between nozzles which affect the size of the printed line for the industrial application of direct writing on printed circuit boards(PCB). 1D lumped model analysis shows that it is useful tool for evaluating performance of an inkjet head by varying the design parameters. The differences in ejected volume and droplet velocity between analytical and experimental result are within 12%. Time sequence of droplet generation is verified by the comparison between 3D analysis result and photographic images acquired by stroboscopic technique. In addition, by applying DPN process, velocity and volume uniformity between nozzles is dramatically improved that the tolerance achieved by the piezoelectric inkjet printhead across the 64 nozzles is 5 to 8%. A printed line pattern is successfully obtained using the fabricated inkjet print head and droplet calibration system.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.121-126
• /
• 2017

EES System support to maximize equipment efficiency by providing real-time information of main equipment which has a significant effect on product quality and productivity, and to prevent equipment failure by detecting equipment abnormality in advance. Smart Equipment Engineering System(S-EES) integrates the activities performed at equipment that are the core of production activities and manages them by system so as to maximize the efficiency of equipment and raise the quality level of products to one level. In other words, when the product is put into the equipment, the recipe is downloaded through the RMS, the recipe is set to the optimal condition through R2R(process control), and the system detects and controls the abnormality of the equipment during operation through the FDC function in real time it means. In this way, we are working with the suitable recipe that matches the lot of product, detecting the abnormality of the equipment during operation, preventing the product from being defective, and establishing a system to maximize the efficiency through real-time equipment management. In this study, we review the present status and problems of equipment management in actual production lines, collect the requirements of the manufacturing line for the PCB line, design and develop the system, The measurement model was studied.

• Journal of Radiation Industry
• /
• v.9 no.3
• /
• pp.137-141
• /
• 2015

A single-shot dual-energy x-ray imaging technique has been developed using a sandwich detector by stacking two detectors, in which the front and rear detectors respectively produce relatively lower and higher x-ray energy images. Each detector layer is composed of a phosphor screen coupled with a photodiode array. The front detector layer employs a thinner phosphor screen, whereas the rear detector layer employs a thicker phosphor screen considering the quantum efficiency for x-ray photons with higher energies. We have applied the proposed method into the inspection of printed circuit boards, and obtained dual-energy images with background clutter suppressed. In addition, the single-shot dual-energy method provides sharper-edge images than the conventional radiography because of the unsharp masking effect resulting from the use of different thickness phosphors between the two detector layers. It is promising to use the single-shot dual-energy x-ray imaging for high-resolution nondestructive testing. For the reliable use of the developed method, however, more quantitative analysis is further required in comparisons with the conventional method for various types of printed circuit boards.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.395-400
• /
• 2011

This study has been carried out in order to effectively manage three groups of unregulated hazardous organic substances (PCDD/DFs, PAHs, PCBs) in South Korea. The investigated substances have been analyzed according to the test methods for hazardous substances in specified wastes provided by the National Institute of Environmental Research, Korea. Total contents of the organic compounds have been determined for hazardous wastes from three major industrial categories (paint, iron removal, steelmaking), such as waste organic solvent, waste paint or dust. By investigating the waste samples for 7 PAHs using GC/MSD, Naphthalene has been detected (N.D~1631.33 mg/kg). The highest Naphthalene concentration, which exceeded the korean marine dumping waste standard, was found in waste organic solvents and waste paints. Although a content analysis of 7 PCB isomers has been conducted, none of these compounds was detected. The analysis of PCDD/DFs has revealed that all samples meet the criterion for low POP content defined in the technical guidelines developed under the Basel Convention. The PCDD/DFs content in dust samples deriving from 10 manufacturing processes (billet, bloom) was determined to be in the range of N.D~5.66 ng I-TEQ/g waste.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.550-557
• /
• 2021

With the advent of the fourth industrial revolution, the interest in the internet of things (IoT) in manufacturing is growing, even at foundries. There are several types of process data that can be automatically collected at a foundry, but considerable amounts of process data are still managed based on handwriting for reasons such as the limited functions of outdated production facilities and process design based on operator know-how. In particular, despite recognizing the importance of converting process data into big data, many companies have difficulty adopting these steps willingly due to the burden of system construction costs. In this study, the field applicability of IoT-based devices was examined by manufacturing devices and applying them directly to the site of a centrifugal foundry. For the centrifugal casting process, the temperature and humidity of the working site, the molten metal temperature, and mold rotation speed were selected as process parameters to be collected. The sensors were selected in consideration of the detailed product specifications and cost required for each process parameter, and the circuit was configured using a NodeMCU board capable of wireless communication for IoT-based devices. After designing the circuit, PCB boards were prepared for each parameter, and each device was installed on site considering the working environment. After the on-site installation process, it was confirmed that the level of satisfaction with the safety of the workers and the efficiency of process management increased. Also, it is expected that it will be possible to link process data and quality data in the future, if process parameters are continuously collected. The IoT-based device designed in this study has adequate reliability at a low cast, meaning that the application of this technique can be considered as a cornerstone of data collecting at foundries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.206-218
• /
• 2020

Located mostly inside the megacity of Busan, the Busan Southern Port is a multifunctional port with various nearby industry activities, including a joint fish market, ship repair facilities, and fishing boat facilities. If toxic chemicals generated by the industrial activities continue to flow into and accumulate in the sediment of the port, they can affect aquatic ecosystems and humans. Therefore, in this study, distribution levels and potential influent sources of organic pollutants, including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and butyltin compounds (BTs), in the sediment were investigated. The sediment samples were collected from eight sampling sites in November 2013 (first phase) and November 2014 (second phase). The mean concentrations of PAHs, PCBs, and BTs in the first and second sampling phages were 4174.0 ng/g-dry wt. and 1919.0 ng/g-dry wt., 166.3 ng/g-dry wt. and 21 ng/g-dry wt., and 50.9 ng/g-dry wt. and 30.8 ng/g-dry wt., respectively. The concentrations of the organic pollutants detected in the seabed sediments were lower in the second phase than in the first phase. In this study, the inflow sources of PAHs, PCBs, and BTs were found to be combustion, land, and municipal sewage or industrial wastewater, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.650-656
• /
• 2018

The TFT-LCD industry is a kind of large-scale industrial Giant Microelectronics device industry and has a similar semiconductor process technology. Wet etching forms a relatively large proportion of the entire TFT process, but the number of published research papers on this topic is limited. The main reason for this is that the components of the etchant, in which the reaction takes place, are confidential and rarely publicized. Aluminum (Al) and copper (Cu), which have been used in recent years for the manufacture of large area LCDs, are very difficult materials to process using wet etching. Cu, a low-resistance material, can only be used in the wet etching process, and is used as a substitute for Al due to its high speed etching, low failure rate, and low power consumption. Further, the abnormal reaction of hydrogen peroxide ($H_2O_2$), which is used as an etching solution, requires additional piping and electrical safety devices. This paper proposes a method of minimizing the damage to the plant in the case of adverse reactions, though it cannot limit the adverse reaction of hydrogen peroxide. In recent years, there have been many cases in which aluminum etching equipment has been changed to copper. This paper presents a countermeasure against abnormal reactions by implementing safety PLC with a high safety grade.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.615-622
• /
• 2015

As the development of high efficiency and high flux density LEDs, the trend of illumination lamp industry transfers from conventional-lamps to the LED-lamps. For energy efficiencies, LED lamps are superior to the conventional lamps, but they have heat problems. Especially, the heat problems are severe for the high luminance lamps. They degrade the soldering point of the metal PCB, and shorten the life cycle of LEDs. So, the solution of the heat sinking is very important to develop high luminance LED lamps. This study suggested a new method to solve the heat problems for high luminance LED lamps, and developed a LED lamp which has 1200W power. In this study, a water jacket is installed to the LED lamp, and the cooing water is circulated by a water pump.

• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.206-215
• /
• 2005

Polychlorinated biphenyls (PCBs) were commercially produced as complex mixtures beginning in 1929. The PCBs manufactured commercially are known by a variety of trade names including; Aroclor (USA), Phenoclor (France), Kaneclor (Japan), Sovol (USSR) and so on. PCBs are a class of 209 congeners that were widely used in a wide variety of applications, including dielectric fluid in transformers and large capacitors; heat transfer fluids; hydraulic fluids; lubricating and cutting oils; and as additives in pesticides, paints, adhesives, sealants, and plastics. The quantification methods of peak matching and coefficient comparison were compared using the Aroclor 1242, 1248, 1254, 1260 standards. Also, six transformer oils were analyzed as a main source of polychlorinated biphenyls (PCBs) emission into the environment. The transformer oils contained the pure and mixed of Aroclor 1242, Aroclor 1254, and Aroclor 1260. The analytical results using two quantification methods showed the little difference between the measured results.