• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.3-15
• /
• 2001

The bilayer forming ability of pseudo-ceramide PC104 in octanoic acid/water/n-octyl $\beta$-D-glucoside mixtures was investigated through the phase diagram. Because of its low solubility in water and of its crystallization, pseudoceramide PC104 was dissolved in octanoic acid, which is nontoxic additive for foods and cosmetics. The mixtures formed four different phases (L1, L2, LC and two phases). Depending on the concentration of PC104 in octanoic acid, the region of each phase was extended or contracted. On the contrary to the region of L2, regions of lamellar phase and L1 phase were expanded. The bilayer-forming ability of PC104 was explained on the basis of concentration of PC104 at interface and interaction between PC104 and octanoic acid. From FT-IR results, it was found that the interactions of PC104’s polar head group with octanoic acid increased as the amount of PC104 in octanoic acid increased. Also emulsion size and size distribution have been studied depending upon the emulsification path. droplets of emulsion prepared from lamellar phase were smaller and more homogeneous compared to those of emulsions formed from L2 phase.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.452-459
• /
• 2007

This paper presents the flight control system using a PC104 with GPS and IMU. This System includes an Auto/Manual conversion module by PIC16 for safety, and homing type guidance algorithm to flight toward a scheduled target. We verify the performance of the flight control system via ground test, and present the possibility of application into UAV control system via comparison with the commercial system.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.330-342
• /
• 2003

The formation of emulsions and micelles in water/ceramide PC104/CholE $O_{20}$/C$_{16}$E $O_{20}$ and water/ceramide PC104/CholE $O_{20}$ mixtures was investigated through the phase behavior studies. The phase diagrams showed the existence of micelle and emulsion regions in both systems. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) showed the wider micellar and emulsion regions than the single surfactant system (CholE $O_{20}$). From FT-IR measurements, it was found that the polyoxyethylene (POE) groups of surfactants formed the hydrogen bonds with amido carbonyl group in ceramide PC104. This result indicated that the hydrophilic part (EO) of surfactants could stabilize the lamellar structure and emulsion of ceramide PC104. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) resulted in the smaller emulsion droplet size due to the effect of curvature at the interface, thus further increasing emulsion stability. With the penetration of $C_{16}$E $O_{20}$into the interfacial layer of surfactants in emulsion, the curvature of the interface might be altered for the formation of smaller emulsion droplets. The mixed surfactant system could incorporate up to 4 wt. % of ceramide PC104 into emulsion more than single surfactant system.ystem.m.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.2
• /
• pp.97-104
• /
• 1998

This study reviews usability of PC communication softwares with different dialogue types of user interface. Usability test was conducted to evaluate usability of 3 PC communition softwares which are currently utilized in Korea. Learnability was adopted as an index of usability evaluation, so learning time, testing time and scores were measured as dependent variables. It is suggested that softwares with mixing dialogue type(menu, icon, command) which were implemented in window systems environment were not superior to that with command dialogue type.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.103-104
• /
• 2016

Most of studies on PC method aim at the structural analysis and development of PC members, and studies on the construction management aspect are insufficient. This study is a basic research in the construction management aspect regarding 'composite method using hollow-PC column' (HPC method), and is intended to develop assessment standards for the benefit·cost analysis of HPC method. Assessment standards for the benefit·cost analysis were composed of main-factors and sub-factors through interview with 4 experts. It was possible to classify main-factors into 4 major categories, i.e,. structural performance, construction performance, construction duration and construction cost. Sub-factors were composed of factors which were of high importance in assessing the two methods. And factors judged to be repeated or of little importance were excluded.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.104-108
• /
• 2012

Flexible organic thin film solar cell device with Bulk Hetero-Junction (BHJ) structure was fabricated with blended conjugated polymer of PCDTBT : $PC_{71}BM$ as active layer. Surface of ITO anode for the organic solar cell device was treated with ozone. The organic solar cell device with bare ITO showed short circuit current density ($J_{sc}$) of $8.2mA/cm^2$, open-circuit voltage ($V_{oc}$) of 0.73V, fill factor (FF) of 0.36, and power conversion efficiency (PCE) of 2.16%, respectively. The organic solar cell device with ozone treated ITO anode revealed distinctively improved performance parameters:$J_{sc}$ of $9.8mA/cm^2$, $V_{oc}$ of 0.82V, FF of 0.43, PCE(${\eta}$) of 3.42%.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11a
• /
• pp.377-380
• /
• 2003

본 논문에서는 PC104 모듈을 탑재하여 만들어진 무인 항공 제어 시스템에 관한 내용을 기술한다. 임베디드 리눅스를 사용하여 제작된 항공기 제어 시스템은 디바이스 드라이버와 제어 애플리케이션으로 구성되어 있다. PC104 모듈에는 비행에 필요한 외부 장치들이 연결되는데, 연결된 장치에서 측정한 데이터를 처리하여 애플리케이션으로 전달해 주는 역할을 하는 디바이스 드라이버를 설명하고, 디바이스 드라이버에서 전달받은 데이터를 기반으로 구현한 애플리케이션에 대한 내용을 설명한다. 또한 향후 시스템 운용에 시뮬레이션 기능 구현의 필요성과 RTOS 적용 가능성을 제시해 본다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.78-84
• /
• 2006

This paper describes UAV (Unmanned Aerial Vehicle) control system which employs PC104 modules. It is controlled by application program based on Linux OS. This application consists of both Linux device driver in kernel-space and user application in user-space. In order to get data required in the unmanned flight, external devices are connected to PC104 modules. We explain how Linux device drivers deal with data transmitted by external devices and we account for how the user application controls UAV on the basis of data processed in the device driver as well. Furthermore we look into the role of GCS (Ground Control Station) which is to monitor the state of UAV.

• Korean Journal of Acupuncture
• /
• v.30 no.2
• /
• pp.104-113
• /
• 2013

Objectives : The purpose of this study is to analyze an effect of medical Qigong therapy using Dong Chu Chim (DCC) which was invented by "Dongchu Han Medicine Institute", by measuring HRV. We compared effects of DCC with non-treatment, filiform acupuncture and filiform acupuncture with natural abdominal breathing. Methods : 1. The authors stimulated Nogung (PC8) of 26 normal adults by using DCC or filiform acupuncture in turn. 2. The natural abdominal breathing has been carried comfortably with consciousness in the lower abdomen. 3. HRV was measured for 5 minutes, three times (pre-treatment, during-treatment and post-treatment). Results and Conclusions : From this study, it seems that the stimulus of DCC, filiform acupuncture, filiform acupuncture with natural abdominal breathing can all affect the autonomic nervous system and control the balance of that. But there were not significant differences between these stimulus groups and the non-treatment group. Therefore, we suggest additional studies about the effect of DCC in the future.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.101-104
• /
• 1987

This paper shows the robot-vision system which consists of robot, vision system, single board computer and IBM-PC. IBM-PC based system has a great flexibility in expansion for a vision system interfacing. Easy human interfacing and great calculation ability are the benefits of this system. It was carried to interface between each component. The calibration between two coordinate systems is studied. The robot language for robot-vision system was written in "C" language. User also can write job program in "C" language in which the robot and vision related functions reside in the library.side in the library.