• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.575-579
• /
• 2005

In this paper, the development of an IMM(Injection Molding Machine) controller is discussed. Presently, the Mold Close and Open Control Method of a toggle-type IMM is open-loop control. Through the development, a PC based control system was built instead of an existing controller and a closed-loop control replaced the previous control method by using PC based PLC. To control the nonlinear system of toggle type clamping unit, a fuzzy PI control algorithm was selected and it was programmed by an IL(Instruction List) and a LD(Ladder Diagram) on a PC based PLC. The application of fuzzy algorithm as the control method was also considered to change a control object like a mold replacement or an additional apparatus. For the development of an IMM controller, PC based PLC of PCI card type, distributed I/O modules with CANopen and Industrial PC and HMI (Human Machine Interface) software were used.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.187-194
• /
• 2005

A PC-based 8-channel seismic system has been developed and applied for bedrock mapping in near shore environment. The system is composed of an analog signal processor and an A/D converter installed on the computer, and a streamer with the group interval of 5 meters. The system is accomplished with a data acquisition program which controls the system and a data processing software. With the PC-based shallow marine seismic survey system high-resolution 2-D marine seismic profiles which have high S/N ratios can be obtained after appropriate data processing.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.237-244
• /
• 2002

Mechanical properties, flow characteristics and chemical resistance of polycarbonate (PC)/polybutylene terephthalate (PBT) /impact modifier (IM) blends were investigated over the various composition ranges of PC and PBT. Mechanical properties of the PC/PBT/IM blends for different IMs, butadiene based IM and butyl acrylate based IM, were studied for various compositions of the IMs. Impact strength at low temperature was also observed. For the study of chemical resistance of the PC/PBT/IM blends, the blonds were dipped in organic solvent, thinner, and then variations of mechanical properties were analyzed. Tensile and flexural strengths were increased linearly and heat distortion temperature (HDT) also increased as PC content in the blends increased. Impact strength increased drastically as PC content increased up to 50 wt% and stayed stable value. Flowability decreased as PC content increased. Impact strengths of the blend were various for different IMs. Butyl acrylate based IM showed slightly higher impact strength than butadiene based IM for the temperature above $0^{\circ}C$. However, butadiene based IM showed remarkably higher impact strength than butyl acrylate based IM for the temperature below $0^{\circ}C$. Through the experiment of chemical resistance it was observed that tensile and flexural strengths decreased, and impact strength increased as PC content in the blends increased. PC in the blend would become mild and ductile when it contacted with organic solvent. Thus the impact strength increased while tensile and flexural strength decreased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.286-291
• /
• 1995

The deterioration of PC box girder may cause serious effect on the durability of PC structure compared to that of RC structures. In the durability assessment of PC box girder bridges, a quantitive model on crack width is considered as a measure of durability. This study suggests a durability limit state model for PC box girder bridges. This durability limit state model in formulated based on the conventional models on the cracks in concrete. And the allowable crack width is taken as an assumed value established by the design specification or provided by the maintenance authority of the structure.

• Elastomers and Composites
• /
• v.52 no.2
• /
• pp.99-104
• /
• 2017

Due to the depletion of fossil oil and the increasing oil price, bio-plastic is currently topical. Bio-based plastics are synthesized from plant resources, unlike conventional petroleum-based counterparts. Therefore, the former minimizes global warming and reduces carbon dioxide emission. Fossil polycarbonate (PC)has good mechanical and optical properties, but its synthesis requires bisphenol-A and phosgene gas, which are toxic to humans. To address these problems, the fused deposition 3D printing process (hereafter, FDM) is studied using environmentally-friendly and high-strength bio-based PC. A comparisonof the environmental impact and tensile strength of fossil PC versus bio-based PC is presented herein, demonstrating that bio-based PC is more environmentally-friendly with higher tensile strength than fossil PC. The advantages of bio-based PC are applied in the FDM process for the fabrication of environmentally-friendly baby toys.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.1
• /
• pp.35-41
• /
• 2002

It is extremely important to minimize network access time in constructing a high-performance PC cluster system For an SCI based PC cluster it is possilbe to reduce the network access time by maintaining network cache in each cluster node, This paper presents a CC-NUMA card that utilizes network cache for SCI based PC clustering The CC-NUMA card is directly plugged into the PCI solot of each node, and contains shared memory network cache, and interconnection modules. The network cache is maintained for the shared memory on the PCI bus of cluster nodes. The coherency mechanism between the network cache and the shared memory is based on the IEEE SCI standard. A CC-NUMA prototype card is developed to evaluate the performance of the system. According to the experiments. the cluster system with the CC-NUMA card showed considerable improvements compared with an SCI based clustser without network cache.

• Journal of Biomedical Engineering Research
• /
• v.19 no.3
• /
• pp.305-312
• /
• 1998

A small PACS based on PC is designed for CR. To receive the digital image from CR, a DICOM Interface Unit (DIU) is designed that complied with the medical image standard, DICOM V3.0. The CR images acquired through the DIU are stored in a file-server; the patient information of the images is stored in a database. To improve the performance of PC and to use it easily, multiresolution images are constructed by wavelet transform and displayed progressively. Wavelet compression method is newly adopted to store the images hierarchically to storage units. In this compression method, the image is decomposed into subclasses of image by wavelet transform, and then the subclasses of the image are vector quantized using a multiresolution codebook. The storage units for CR images were divided into the short-term storage in file-server and the harddisk in viewing station. Image processing tools supported by general PACS is implemented based on PC.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.103-112
• /
• 2006

In this paper, we propose a PC based immersive virtual environment system with expandability and compatibility in contrary to existing immersive virtual environment(IVE) systems which have been implemented by supercomputer or special computing system. The application based on commercial personal compute may have two major advantage: one is variety of resources, the other is user-friendly interface. This system intends to offer easy contact to IVE system, realistic images, and convenience. Also, the system can handle various virtual reality at real-time and make it easier to interface existing complicated haptic device. Geometric techniques are adopted to calculate and visualize the physical phenomenon to speed up the computing time. The proposed implementation method of PC based immersive virtual environment system is implemented to the example in which user move around inside of and interact with virtual office environment wearing data glove, behavior recognition devices, and HMD.

• Archives of design research
• /
• v.16 no.2
• /
• pp.301-310
• /
• 2003

The interface design of mobile products has become a hot issue recently as a variety of products are being developed for extended usages. There have been two different views on interface design of mobile products like PDAs(personal digital assistants) or cellular phone. One 치aims that the current interface design of PC cannot be directly applied because mobile products have their own specific functions and requirements. On the meantime, the other argues that an extended application of PC metaphors to mobile products can have advantages because users'PC experiences can reduce the learning efforts and thus contribute to intuitive understanding mobile products. In this research, two types of PDAs, developed according to the aforementioned conflicting philosophies were compared and evaluated, based on laboratory-based usability testing conducted by novice users. The experiment consists of asking subjects to perform identical tasks for the two different types of products. The interaction data collected during usability testing were analyzed in terms of time taken, rate of success of tasks and errors. The experiment shows that there were some meaningful effects of users'experience of PC on the usability of PDAs.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.257-264
• /
• 2014

Through MCU model, Radio Frequency communication is completed using universal asynchronous receiver and transmitter. The communicatin with PC and MCU is completed using RS-232 cable. At first interconnected communication with PC and MCU is necessary for RF communication because tha UART is based technique for RF communication. Program imbeded in microcontroller unit is ran during RF signal is transmitted to other RF module. Data connected with PC and MCU is transmitted between PC and MCU during PC and MCU is connected.